Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The Niles Audio CM7BG Ceiling Mount speaker is designed for background music applications in non-primary listening areas. The CM7BG comes with a magnetically-attached paintable metal grille.

Note: The CM7BG is packaged as a single speaker.

Drivers: The CM7BG has a light, but strong 7" polypropylene cone woofer. The integrated woofer/baffle design enhances the low frequency response, and allows you to mount a 7" speaker in locations where many competitor's speakers with the same frame diameter can only use a 6-1/2" driver. The 13mm (1/2") fluid-cooled Kaladex dome tweeter provides wide dispersion of detailed high frequencies.

Grille: The CM7BG includes a 10" diameter MicroPerf grille, which attaches magnetically to the speaker. The 1/4" thick grille is easy to install, and blends with the room's aesthetics. It is rust-resistant, and paintable to match any décor. An optional SG7C square grille is also available, if desired.

Weather-Resistant: The frame, speaker, and grille are weather-resistant, so you can install the speaker in moist environments, including bathrooms and outdoors under eaves.

Speaker Terminals: The CM7BG is equipped with spring-loaded post terminals, which can accept up to 12-gauge speaker wire. For wire runs of less than 80 feet, 16-gauge wire is recommended. You should use 14-gauge wire for runs of 80-200 feet, and 12-gauge wire for runs over 200 feet.

Note: When running speaker wire inside walls or ceilings, special jacketed cable (CL-2 or CL-3) should be used to protect the wire and for fire prevention. If unsure, you should consult your local building inspectors about code compliance requirements.

Installation: Installing the speaker requires a 8-1/2" cutout. The speaker requires a depth of 3-3/4" behind standard 5/8" drywall. There are three spring-loaded mounting clamps with screws that tighten from the front.