Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

General Overview: This amplifier wiring kit includes the power and ground wiring required to install a high-powered amplifier with a current rating of up to 250 amps. It does not include speaker wire or signal cable.

Power and Ground Cable: The 18' 1/0-gauge power cable has a translucent blue insulation jacket while the 3' 1/0-gauge ground cable has a clear insulation jacket.

In-line Fuse Holder: The in-line fuse holder is waterproof and comes with a 250-amp ANL fuse installed. The fuse holder's set screw input and output accept bare 1/0-gauge wire (no ring terminal required). The integrated base allows mounting the fuse holder using four screws (not included).

Note: The set screws require a 5mm Allen wrench.

ANL Fuse: The supplied 250-amp ANL fuse is installed in the fuse holder. ANL fuses are available up to 300 Amps if needed.

18-AWG Remote Turn-On Lead: The kit includes a 16' spool of 18-gauge remote turn-on lead wire.

Dimensions:

• 1/0-AWG Power and Ground Wire: 0.575" diameter
• Fuse Holder:
  • Width: 1.375" (the base is 2.1875" wide)
  • Height: 1.6875"
  • Length: 6.0625" (the base is 2.595" long)
• Power Ring Terminal (installed):
  • Width: 0.715"
  • Inner Diameter: 0.326" (slightly more than 5/16")
• Ground Ring Terminal (installed):
  • Width: 0.715"
  • Inner Diameter: 0.191" (slightly more than 3/16")
• 18-AWG Spade Terminals:
  • Outer Width: 0.285"
  • Inner Width: 0.165"