Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Cone Material: The woofer cones are
constructed of titanium-coated injection-molded polypropylene. The titanium
coating adds strength and heat resistance to the polypropylene, resulting in
reduced distortion and improved reliability.
butyl rubber surrounds have greater internal loss than standard urethane
surrounds, preventing harmonic distortion at higher frequencies. Butyl rubber
more efficiently absorbs edge reflections that can cause audible distortion,
resulting in clearer bass performance. In addition, the surrounds can withstand
the extremes of the automotive environment.
Tweeter Dome Material:
Each 3/4" dome tweeter is made with a Poly-emide foam dome that offers
smooth, clear highs.
Magnets: This type of magnet produces a strong magnetic field.
Since neodymium magnets are so strong, a small neodymium magnet can be used to
make a compact tweeter, without sacrificing performance.
Ferro-Fluid Cooled Voice
Coils: Each tweeter voice coil is fluid
cooled for greater durability.
Tweeter Mounting Options: The tweeters may be flush or surface
mounted. The tweeters swivel in the flush and surface housings, so you can
control the direction of your high frequencies.
Tweeter Pole Mounts: In
addition to standard tweeter mounting options, the tweeter mounting poles let
you mount the tweeters directly to the center of the midranges. When the
tweeters are mounted separately, you can mount the supplied phase plugs to the
center of the midranges. Note: When the tweeter is attached to the
midrange, the speaker mounting height increases to 0.495" and the tweeter
protrusion increases to 0.279".
Dimensions: L=4.763", W=3.015", H=1.251"
The crossovers feature a 4.0kHz high-pass network for the tweeters and a 4.0kHz
low-pass network for the woofers.
The crossover inputs and outputs are gold-plated screw terminals.
There are two mounting holes in the base of each crossover.