Chat
Contact us
Close contact box
Connect ID #
747 078 797 4
Connect ID #
747 078 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

AudioQuest SUB-3 Subwoofer cable (3-meter/9.8 feet)

Item # 703SUB33M

AudioQuest's SUB-3 cable features the finest-quality materials to help your high-performance powered subwoofer...

AudioQuest's SUB-3 cable features the finest-quality materials to help your high-performance powered subwoofer...

Item # 703SUB33M

Shop all AudioQuest Subwoofer Cables

About the AudioQuest SUB-3

Ralph Graves
AudioQuest's SUB-3 cable features the finest-quality materials to help your high-performance powered subwoofer deliver extraordinarily clear, detailed bass. This triple-balanced cable features three identical conductors for clean signal transfer. Each conductor is a single, unbroken strand of 6.1% silver. Solid conductors eliminate electrical and magnetic interference that can add brittleness to the sound with multi-strand conductor cables.

AudioQuest's SUB-3 cable features the finest-quality materials to help your high-performance powered subwoofer deliver extraordinarily clear, detailed bass. This triple-balanced cable features three identical conductors for clean signal transfer. Each conductor is a single, unbroken strand of 6.1% silver. Solid conductors eliminate electrical and magnetic interference that can add brittleness to the sound with multi-strand conductor cables.

Dielectric-Bias System
Most higher-end cables require a break-in period before they perform their best. A charge builds up in the insulation through continual use, increasing the efficiency of the cable. This charge can dissipate when the cable's not in use, giving you less than optimal performance until it builds up again.

AudioQuest's Dielectric-Bias System (DBS) eliminates this break-in period. A small battery pack attached to the cable polarizes the insulation with a 36-volt charge, giving you clear, expressive sound from your system every time you turn it on. This also helps eliminate the time delay that can create audio jitter.

Air tube insulation and shielding
Each conductor has its own insulating air tube, which prevents information smearing better than foam insulation. An additional layer of shielding virtually eliminates electronic noise, for the cleanest signal possible.

High-quality connectors eliminate the weakest link
The SUB-3 features RCA connectors made of silver-plated copper. Although this same material can cause high frequencies to sound edgy with full-range analog audio signals, it actually improves bass articulation when used in subwoofer cables. The connectors are fastened by cold welding — a process that uses high pressure and silver paste to minimize signal loss. By contrast, solder tends to impede the signal, and heating the copper conductor can negatively affect its performance.

READ LESS

Product highlights:

  • three silver-plated solid copper conductors (silver layer is 6.1% of total conductor)
  • Dielectric-Bias System with attached battery pack (batteries included) maintains constant 36V charge for optimal performance
  • 100% coverage shield for noise-free signal transfer
  • cold-welded silver-plated RCA connectors
  • built-in ground wire with spade lugs
  • textile braid cable cover
  • warranty: 5 years
  • MFR # SUB-3 3M

What's in the box:

  • 9.8' Subwoofer cable with a male mono RCA connector and 8" ground lead on each end and a 36V DBS module attached to one end

Customer reviews for AudioQuest SUB-3

Loading reviews...

Average review:

5.0 out of 5 stars
1 review

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the AudioQuest SUB-3

Stacey B.

Product Research

Features

Sub-3 Series Subwoofer Cable: The AudioQuest/CinemQuest SUB-3 subwoofer cable uses three solid 6.1% Silver conductors inside PE Air Tubes. Solid conductors eliminate strand-interaction distortion. PE Air Tubes minimize information smearing caused by any solid or foam insulation. The 36V electrostatic field on the PE tubes almost eliminates remaining insulation induced distortion. Three conductors along with welded silver-plate, single-ended RCA plugs  insure optimum performance while a 100% coverage shield insures noise-free performance. The Silver-plated plugs are welded to Sub-3 using 8,000 amperes.

Silver-Plated Copper (SPC): Silver-Plated Copper (SPC)  provides superior performance for subwoofer audio frequencies. SPC enhances the articulation and intelligibility of low frequency information from your amplifier to your subwoofer.

Note: Do not use the Sub-3 subwoofer cable as a full range audio cable.

Dielectric-Bias System (DBS): All insulation slows down the signal on the conductor inside. When insulation is un-biased, it slows down parts of the signal differently, a big problem for very time sensitive multi-octave audio. AudioQuest's DBS creates a strong stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS pack's batteries will last for years and a test button and LED allow for the occasional battery check.

Ground Connections: If you hear noticeable hum in your system after connecting your subwoofer, please attach the Sub-3 cable's ground leads to your audio gear. Some audio equipment have a ground (GND) connection on the back-panel, if not, attach the ground spade lugs to any screw on the equipment chassis of both the source and the subwoofer.

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound