Overview: The Sanus VisionMount LL11-B1 Super Slim Low-Profile
Wall TV Mount features an
innovative design which emphasizes the sleek look of your ultra-thin LCD,
plasma, or LED TV by placing it just 9/16" from the wall. The LL11-B1 offers
additional exclusive features that make it incredibly easy to install and use.
ClickStand technology holds the bottom of the
TV away from the wall for easy cable access without removing the TV from the
mount. Convenient quick-release tabs on both mounting brackets stay hidden, but
easily pull down to unlock the TV from the wall plate for cable access. The
ProSet feature allows post-installation height and leveling micro-adjustments for
perfect positioning after hanging. Lateral shift allows the TV to move left and
right on the wall plate so it is placed exactly where you want it, even with
off-center studs. Wall plate mounting holes are designed to accommodate 16" or
24" studs. Universal mounting pattern fits virtually any 37" - 70" flat-panel TV
up to 150 lbs.
Compatibility: The LL11-B1 universal wall-mount bracket is designed to fit flat-panel
plasma and LCD monitors from 37" to 70". The TV can have a maximum
weight of 150 pounds.
Construction: The bracket is
constructed of heavy-gauge steel with a durable
powder-coated black finish.
Super Slim Low-Profile Design: The VisionMount LL11-B1's super slim
low-profile mount design places your flat-panel TV just 9/16" from the wall.
ProSet: ProSet post-installation height and leveling
adjustments allow TV to be perfectly positioned after hanging. Once installed,
your TV or wall-mounted furniture may not appear completely level with its
surroundings. ProSet technology lets you make micro-adjustments to height and
level after mounting to ensure perfect positioning.
ClickStand: The LL11-B1's ClickStand feature allows you to tilt
the bottom of the TV outward (8-degrees/3.0625-inches) and hold it there, giving you easy access to the
back panel for connecting cables. Once all the cables have been plugged in, you
can release the ClickStand and securely lock the TV into position on the wall
Mounting: The wall
plate must be mounted to wall studs or anchored to a brick, block, or concrete
wall using the supplied lag bolts. The slots in the wall plate can accommodate a
variety of stud spacing, allowing you to easily mount the TV to wall studs that
are 16" or 24" on center. Once the wall plate is anchored to the wall studs and
the monitor brackets (with the TV attached) are hooked onto the wall plate, the
TV can slide left or right, allowing you to center the TV on the wall.
Note: Each monitor bracket has
multiple bolt holes and can accommodate vertical hole spacing (on the back
of the TV) from 3-15/16"(100mm) to 19-3/4" (500mm). Since the
monitor brackets can slide on the wall plate, the horizontal hole spacing on the
back of the TV can range from 11-13/16" (300mm)
to 35-5/16" (896mm).
Steel Stud Mounting: If you wish to mount this Sanus wall mount in a
building with steel stud walls, you will need the Sanus SSMK1 Steel Stud
Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications,
such as office buildings, warehouses, and condominiums.
Mounting Hardware: The LL11-B1
comes with M4, M5, M6, and M8 bolts to mount the monitor brackets to your TV.
VESA: Given the mounting
bracket's range of motion, it will accommodate the VESA 300, 400, 300 x 200, 400
x 200, 400 x 300, and 600 x 400 mounting hole patterns in accordance with industry
standards set by the Video Electronics Standards Association.
Installation Tools: The following tools are recommended for
mounting the LL11-B1:
- Stud finder
- Phillips-head screwdriver
- Electric drill
- Drill bits: 3/16" (wood studs) and 5/16" (masonry)
Wall Plate Dimensions: W = 35.3125",
H = 4.875", D = 0.5625"
Monitor Bracket Dimensions: W = 2.625",
H = 22.1875", D = 0.5625"
Total Weight: 9 lbs