Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
General Overview: This is a
complete dual amplifier wiring kit that includes the cabling and accessories
required to install two amplifiers. Speaker wire is included.
In-line Fuse Holder: The
included in-line fuse holder is waterproof and comes with a 60 amp AGU type
fuse. The holder has setscrew input and output connections, both of which will accept 4 gauge wire. The setscrews
require a 4mm allen wrench (not included). The fuse holder is 3.212" wide
and 0.974" in diameter. It's plastic mounting bracket is 0.826" wide
and 1.530 deep, and it has two mounting holes (mounting screws
not included). When the holder and bracket are mounted, the overall height of
the fuse holder and bracket is
Fuse/Distribution block: The
distribution block has a setscrew input for the 4 gauge wire; a 4mm allen wrench
(not included) is required for the setscrew. It holds two AGU
fuses (two 30 amp fuses included) and has two set screw outputs for 8 gauge
wire; a 3mm allen wrench (not included) is required for the setscrews. The block measures 4.963" long, 2.191"
wide and 1.337" tall, and it has two screw holes for mounting (screws not included).
Also, there are two
extra set screw terminals for 4 gauge wire at the input end of the distribution
block; these can be used as non fused outputs, to power another component, or
they can be used to connect the main power cable from a different direction.
Power/Ground Cables: The 4 and
8 gauge power cables are covered with
translucent red insulation. The 4 and 8 gauge ground cables are covered with clear
Interconnect cable: The stereo
RCA interconnect cables included in this kit are 16 foot Stealth
series twisted pair cables. The cables are purple and black, and they have gold-plated RCA connectors on
Ground Distribution Block: The
ground distribution block has four setscrew inputs
for 8 gauge wire and one set screw output for 4 gauge wire; a 3mm allen wrench
(not included) is required for the setscrews. This distribution block is not fused. The block measures 2.538" long,
1.912" wide and 1.120" tall,
and it has two screw holes for mounting (screws not included).
Speaker/Remote turn on wire: The
speaker wire is 16 gauge, and the remote turn on wire is 18 gauge. Both type of
wire are covered with clear
Crimp-on Terminals Dimensions:
- Power ring terminal: the ring
terminal is 0.684" wide; the inner diameter of ring is 0.418"
- Ground ring terminal: the ring
terminal is 0.684" wide; the inner diameter of ring is 0.258"
- Spade terminals: the spade
terminals are 0.278" wide, with a 0.175" prong spacing
- Quick slide terminals: the
female quick slide connectors fit 0.268" wide terminals