Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Plus One Woofer Cones: The Plus One speaker cones offer
more surface area than other speakers that fit in the same size opening. This
is accomplished by using a new basket design and hi-roll surround. The result
is greater bass output and a significant increase in efficiency.
Formed Glass Fiber Woofer Cones: This formed glass fiber
material is very light and extremely stiff, minimizing cone flex. This results
in very low distortion and improved clarity.
iCGM frames: The Kappa series speaker baskets are made of
composite Injected Carbon Glass Matrix (iCGM). iCGM is lighter and stronger than
stamped steel; it retains its shape, even when mounted on uneven surfaces (common
in car mounting locations), plus offers exceptional damping of any resonances.
Edge Driven Dome Tweeters: Each speaker has a 1"
Edge-driven textile soft dome tweeter. An edge-driven tweeter has better dispersion
characteristics and allows for a lower crossover frequency than typical tweeters
of the same size, which improves imaging. The result is improved vocals and
musical clarity. The tweeter also has an adjustable output level, +0 dB (flat)
and +3 dB.
UniPivot Tweeter: The tweeter is angled and can be rotated
about 315° after installation. This allows you to direct the tweeters toward the
listeners, very useful for speakers mounted low in a door.
High-Output Design: The high output 2-ohm voice coil design
compensates for the high in-line resistance of small gauge factory wiring and
extracts every watt from factory receivers, increasing overall system output and
efficiency (relative to 4 ohm speakers). The speaker's 2.0-ohm impedance combined
with the impedance of your speaker wire provides a true 4-ohm load to your connected
headunit or amplifier. The speakers also benefit from increased power when you upgrade
the wire and add aftermarket amplifiers, designed to power a 2-ohm load.
Size: These speakers fit many 5x7 and 6x8 applications.
Terminals: The input terminals are gold-plated set screws that
will accept up to 12 gauge bare wire.
Power Handling: Although Infinity lists the RMS power handling
as 100 watts, they also list the recommended power range as 5-150 watts RMS. We've
opted to list the more conservative 100 watt RMS figure on the specifications page.
