Features
Enclosure Compatibility

Features

Woofer: The cone is constructed of molded polypropylene. Polypropylene is lightweight and strong, giving the woofer high power handling and low distortion.

High Excursion Large Roll Surround: A large edge roll surround allows Punch woofers to produce 20% more linear excursion than standard surrounds, resulting in more bass output.

Parabolic Triangular Cone Geometry Support System: By bonding a polypropylene parabolic dust cap of equivalent size to the cone body, a balanced triangular structure is created. This system reduces piston flex and eliminates cone distortion.

Linear Spider: A compliant linear spider improves mechanical stability under high excursion, maintaining consistent excursion characteristics. This eliminates the need for a "break-in period."

Spider Support Ring: This integrated ring increases the bonding surface area between the voice coil former and spider, establishing a stronger joint. The result is increased mechanical power handling under high power/high excursion situations.

Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.

Precision Stamped CRS Basket: Reinforced cold roll steel basket legs dampen unwanted resonance for better bass coupling.

Double Stacked Magnet Motor Assembly: The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.

Removable Magnet Cover: The cosmetic magnet cover can be removed when additional mounting clearance is required. With the magnet cover installed, the woofer has the following dimensions:

• Magnet Diameter: 7.235"
• Depth as top: 5.643"

Spring Posts: The heavy-duty spring posts will accept pin connectors and bare wire.

Concealing Ring: Once the subwoofer is mounted, the concealing ring can be installed to hide the mounting screws, giving the subwoofer a finished look.

Enclosure Compatibility

Recommended Sealed Box Volume: The sealed box sizes recommended by Rockford Fosgate range from 0.5 cu/ft to 1.0 cu/ft. Within this range, the ideal size recommended by Rockford Fosgate is 0.65 cu/ft, so this is the enclosure recommended by Crutchfield.

Recommended Vented Box Volume: The vented box sizes recommended by Rockford Fosgate range from 1.0 cu/ft to 1.5 cu/ft. Within this range, the ideal size recommended by Rockford Fosgate is 1.25 cu/ft, so this is the enclosure recommended by Crutchfield. One 3" diameter x 7.3" long port should be used with a 1.25 cu/ft enclosure.

Recommended Single Reflex Bandpass Volume: Rockford Fosgate's enclosure chart lists three compatible bandpass enclosures. The highlighted bandpass enclosure has a sealed chamber volume of 0.6 cu/ft, a vented chamber volume of 0.45 cu/ft and a single 3" diameter x 14" long port. The smallest recommended enclosure has a sealed chamber volume of 0.5 cu/ft, a vented chamber volume of 0.3 cu/ft and a single 3" diameter x 15" long port. The largest recommended enclosure has a sealed chamber volume of 0.75 cu/ft, a vented chamber volume of 0.55 cu/ft and a single 3" diameter x 21" long port.