Detachable Face: The JVC KD-R320 features a detachable face to deter theft. A face-fixing screw is
supplied for making the face non-detachable, if desired.
Note: No face case is included with this unit. An
optional soft face case (142DFC1X,
sold separately) can be purchased for this unit.
LCD: The head unit features
a 14-segment, one-line LCD with adjustable brightness and dimmer settings.
Brightness: The unit offers an adjustable display and button
illumination brightness level (0-31) for day and nighttime driving.
Display/Button Illumination Dimmer: The display/button
illumination dimmer can be set to Off (normal brightness at all times), On
(display/button illumination is always dimmed), or Auto (display dims when
12-volts is applied to the orange/white illumination lead).
24 Bit D/A Converter: The JVC KD-R320 utilizes a 24-bit
digital to analog converter for superior CD sound quality.
MOSFET Amplifier: The KD-R320 is equipped with a MOSFET
amplifier. Compared to conventional power supplies, the MOSFET amplification
circuit is smaller and more efficient, and it delivers increased power with less
distortion and absolutely zero on/off switching noise. More power means louder
and cleaner music at higher volumes because you're not pushing the limits of the
CEA2006 Compliant: The power specifications for the KD-R320
are compliant with the CEA2006 Mobile Amplifier Power Testing and Measurement
standards from the Consumer Electronics Association (CEA). These standards were
developed as a way to equitably compare power specs from model to model and
between manufacturers. The power output specs for the KD-R320 are as follows:
- CEA2006 Specs: 20 watts RMS x 4 channels (at 4 ohms,
20Hz-20kHz, 1% THD-N)
- Maximum Power Output: 50 watts x 4 channels (200 total
Amplifier Gain Control: When you
are using the KD-R320 with factory speakers (or those rated to less than 50
watts peak), the Amplifier Gain Control can limit the amount of power being sent
to those speakers. When the Amp Gain Control is set to "low," the volume control
ranges from 0 (minimum) to 30 (maximum). When using speakers rated higher than
50 watts peak, you can set the Amp Gain Control to "high," and the volume
control will range from 0 to 50.
Volume Adjust: The input level of each source (other than FM) is
adjustable relative to the FM radio volume, so there isn't a significant volume
difference when changing sources. Each source is individually adjustable from -5
Pro EQ: The KD-R320 is equipped with JVC's Pro EQ. The
integrated equalizer offers 7 preset sound modes (Flat, Natural, Dynamic, Vocal Boost, Bass Boost, User) suitable for the music genre of your choice. The User mode allows you to manually adjust the head unit's 3-band parametric EQ
(Frequency, Level, and Q-Factor).
||60, 80, 100, 200 Hz
||+/- 12 dB (-6 to +6)
||1.0, 1.25, 1.5, 2.0
||0.5, 1.0, 1.5, 2.5
||+/- 12 dB (-6 to
||0.75, 1.0, 1.25
||10.0, 12.5, 15.0, 17.5
||+/- 12 dB (-6 to +6)
Loud (Loudness): This feature boosts low and high frequencies to produce a well-balanced sound at a low volume
level. You can turn this feature on or off.
Switchable Preamp Output: The KD-R320
is equipped with one pair of 2.5V preamp outputs. You can set the Rear/SW preamp outputs for connecting rear speakers (through an external amplifier) or for connecting a subwoofer (through an external
amplifier). When set for rear speakers, the rear outputs operate with the unit's
fader control. When set for subwoofer, the outputs are non-fading.
Built-in Crossovers: The JVC KD-R320 features a built-in high-pass
filter for the unit's front & rear speakers and a low-pass filter for the unit's
- High-Pass Filter: You can activate a high-pass filter (fixed) for
the unit's front & rear speaker channels, so low frequency signals are cut
off from your system's front & rear speakers.
- Low-Pass Filter: When the unit's Rear/SW preamp output is set to
Subwoofer, you can
set the cutoff frequency of the low-pass filter at 55Hz, 85Hz, or 120Hz.
Subwoofer Level: When the unit's Rear/SW preamp output is set to
Subwoofer, you can adjust the head unit's subwoofer level between 0 and 8.
Key-Touch Tone: The in-dash head unit provides an audible
beep to confirm button operation. This function can be turned On or Off.
AM/FM Tuner: The JVC KD-R320 features a built-in AM/FM tuner with
manual, seek, and preset tuning.
Preset Tuning: You can store a total of 18 FM stations
presets and 6 AM station presets. The radio allows you to set your AM/FM
stations manually or automatically.
IF Filter: You can also switch the tuner's IF filter to Wide
or Auto to increase/decrease the sensitivity.
Mono: If an analog FM stereo broadcast is hard to receive, you can
manually switch the tuner to Mono operation.
US/European Tuning: You can set the built-in
AM/FM tuner between US standard and European tuning spacing,
Disc Compatibility: The unit features a single disc player
that will playback CD-Audio, CD-Text, and finalized CD-R/CD-RW audio discs.
MP3/WMA Playback: The KD-R320 can play MP3
(8-320 kbps)/WMA files (8-192 kbps) that have been recorded on CD-R and CD-RW discs. The disc
must be recorded in one of the following formats: ISO 9660 Level 1/Level 2,
Joliet, Romeo or Windows long file. Each disc can
have a maximum of 8 folder hierarchies, 255 folders, and no more than a total of
512 files and/or folders on each disc. The unit also supports IDTag3 (version
1.0, 1.1, 2.2, 2.3 or 2.4) for album and artist information from MP3 or WMA
Track/Folder List: The Track/Folder List displays a list of MP3/WMA
folders and tracks on a loaded CD, so you can easily access your music. The
Track/Folder List will also display the list of track titles on a CD Text disc.
If the MP3/WMA disc contains a lot of tracks, you can fast search (+/-10 or
+/-100) through the disc by turning the unit's control dial quickly.
Random/Repeat Modes: The JVC
KD-R320 offers the following Repeat and Random playback modes for your audio
- Repeat: Track Repeat (plays the current rack repeatedly), Folder
Repeat (plays all tracks of the current folder repeatedly), Off (cancels
- Random: Folder Random (plays al tacks of the current folder, then
the tracks of the next folder in random), All Random (plays all tracks of
the current disc at random), Off (cancels random function)
Disc Resume: If you change the
source, playback also stops (without ejecting the disc). Next time you select CD
for the playback source, the disc will start from where it has been stopped
Off Insert/Eject: A CD disc can be inserted or ejected with
the power off. When a disc is inserted with the power off, the unit will
automatically power up and begin playback.
Disc Protection: If the ejected
disc is not removed within 15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust. The source will change to CD, and
the disc will begin playback, even if you have another source selected at the
Mounting: For proper disc playback you must install the unit
within 30-degrees of horizontal.
Bluetooth Module: The included JVC Bluetooth Adapter
(KS-BTA100) provides Bluetooth hands-free communication and digital audio
streaming functions for the JVC KD-R320 CD receiver. The KS-BTA100 Bluetooth
Adapter gives you hands-free communication from your compatible Bluetooth mobile
phone and wireless streaming audio from a Bluetooth enabled digital audio
player, when connected to JVC KD-R320. The JVC Bluetooth Adapter includes a
super-sensitive microphone, an Answer/End button, and playback controls. The
KD-R320 can be set to automatically mute any music audio to your vehicle's
speakers so you can listen to your telephone call using your car speakers.
Bluetooth Technology: Bluetooth is a short-range wireless
radio communication technology for the mobile device such as cellular phones,
portable PCs and other devices. The Bluetooth devices can be connected to one
another without cables and communicate with each other. To send or receive voice
and data between this adapter and your Bluetooth device, the units must be
within 10 meters of each other.
Bluetooth Profile: This Bluetooth ver. 2.1+EDR certified
adapter supports the following Bluetooth profiles.
- HFP (Hands-Free Profile)
- A2DP (Advanced Audio Distribution Profile)
- AVRCP (Audio/Video Remote Control Profile)
Pairing: When you connect a Bluetooth device to the JVC CD
receiver through this adapter for the first time, you must pair the two units.
Pairing allows Bluetooth devices to communicate to each other. To pair the two
units, you may need to enter the PIN code of your Bluetooth device you want to
connect. You can pair up to 8 Bluetooth devices to this adapter. Only one device
can be connected and used at any one given time.
Note: Not all Bluetooth devices will be compatible.
http://www.jvc-victor.co.jp/english/car/bluetooth/ for a complete
list of compatible Bluetooth enabled devices.
Hands-Free Communication: The JVC KS-BTA100 Bluetooth
Adapter supports Bluetooth hands-free communication from your Bluetooth mobile
phone through JVC KD-R320 CD receiver. The JVC KS-BTA100 features an integrated
microphone and Answer/End button to control your Bluetooth enabled mobile phone.
Your phone calls will be heard over your vehicle's speaker system.
- Microphone: The KS-BTA100's integrated microphone lets
you carry on your side of the conversation as well as voice dial your
Bluetooth enabled mobile phone's contacts. Your mobile phone must also
support voice dialing for this feature to work. You can adjust the
microphone level between - Low, Normal, or High.
- Answer/End Button: The KS-BTA100's integrated
Answer/End button lets you answer and end phone calls.
- Redial: You can redial the last number called or
- Private Mode: The KS-BTA100 lets you switch from
Hands-Free mode to Private Mode, so you can talk privately on your mobile
Audio Streaming: The adapter allows the JVC CD receiver to
playback audio wirelessly from your Bluetooth compatible portable audio player
or mobile phone. You can use the KS-BTA100's integrated playback controls to
operate the following playback options of your Bluetooth compatible portable
audio player/mobile phone - Play/Pause, Stop, Fast-Forward/Reverse, and Skip
Note: You control your streaming music from the
KS-BTA100's controls, not the JVC head unit.
Connections: TheKS-BTA100 Bluetooth Adapter features an
attached 9.5' cable which is terminated by power/ground/mute leads and a
right-angle male 3.5mm connector. The power wire (Blue/white) connects to the
turn-on lead (Blue/white) of the JVC KD-R320, the ground wire (black) should be
grounded to your vehicle's metal chassis, and the mute (brown) wire connects to
the mute wire (brown) on JVC CD receiver. The right-angle male 3.5mm connector
plugs into the rear-panel auxiliary input on the back of the KD-R320.
Note: The KS-BTA100 must be plugged into the rear-panel
auxiliary input of the JVC head unit, and not the
front-panel auxiliary input. The front-panel auxiliary input does not
Mounting: The KS-BTA100 Bluetooth Adapter includes two-sided
tape to mount the device to your vehicle's dash or console.
Dual Auxiliary Inputs: A front-panel & rear-panel stereo minijack
are provided to allow the connection of portable
audio sources. Simply connect your portable digital music player to either
the unit's front or rear auxiliary input, and you can listen to the audio from the portable player through the
speakers in your mobile audio system.
Wireless Remote Control: The
KD-R320 comes supplied with a wireless remote control (RM-RK52). The remote
contains Power, Attenuator, Sound, Source, Tracking, and Volume functions. The
remote operates off of a single CR2025 3V Lithium-cell battery (included).