Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Compatibility: The enclosure is roughly wedge shaped with black plastic top and side plates, and it`s bottom is contoured to follow the shape of the floorboard in 94`-98` Dodge Ram full-size extended cab trucks. This enclosure fits under the center portion of the rear seat and extends forward to the backside of the front seat(s). Two cup holders (each has a 2.75" diameter opening) are molded into the top of the enclosure. The top front "corner" of the enclosure is curved/recessed to allow the factory front seat armrest/console to fold up/down without obstruction. The plastic fascias may be painted to color match the interior of the vehicle in which the enclosure is being installed.

Cosmetics: The enclosure top and sides are finished with black molded plastic fascia plates with a wrinkled surface pattern; the fascias may be painted to match the vehicle in which the enclosure is being installed. The main body of the enclosure is made of particle board covered with medium gray/black box carpet. The enclosure has an integrated molded black plastic base that is shaped to allow the enclosure to follow the floorboard contour of the above mentioned vehicles.

Cup Holders: Molded into the portion of the enclosure top that extends from the front edge of the back seat to the backside of the front seats, there are two cup holders (each with a 2.75" diameter opening).

Wiring and Terminals: The wire supplied to connect the terminal cup to the woofer is terminated at both ends with 0.210" female quick slides. The input terminals are gold plated 5-way binding posts with plastic wire retaining nuts.

Mounting: Even though the enclosure will be held in place by the back seat, transmission hump and the backside of the rear seat, Ai Research recommends permanently securing the enclosure to the vehicle. No mounting brackets are included, so, to permanently attach the enclosure to the vehicle, a bracket kit (item 125B702KIT) will be needed or brackets and screws may be purchased from a hardware store. Bracket mounting requires drilling and screwing into the vehicle and enclosure.