Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Controls and Inputs
Warranty
Features
Class D Amplifier: The enclosure contains a built-in 200-watt
Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier
is highly efficient and designed specifically for use with the subwoofer in the
enclosure.
Built-in Low-pass Filter: The low-pass filter frequency can
be varied from 50 to 150 Hz for a seamless transition between the output of this
unit and that of the other speakers in the vehicle.
High/Low-Level Input: The unit offers one pair of RCA inputs
that can be used with a High Level (speaker-level) or Low Level (preamp-level)
input signal. A pair of High Level input wires (tinned bare wire-to-RCA plug) is
included.
Auto Turn-On Feature: When the Thunderform is connected using
a speaker-level input signal, the amplifier will automatically detect the signal
and turn on and off with the radio. The auto turn-on feature does not operate when
a preamp level input signal is used, therefore the remote turn-on lead should be
connected.
External Bass Control: The external bass control allows you
to adjust the bass level from anywhere in the vehicle.
Terminator Woofer: This enclosure comes loaded with one 12"
Terminator woofer.
Note: The woofer has an unusual
impedance, specifically designed with the amp, and
cannot be replaced with a standard MTX model.
Molded Enclosure: The molded, high-density polyethylene resin
enclosure resists flexing and dampens resonance.
Controls and Inputs
Controls:
- Gain Control: rotary control that
allows you to set the gain of the amplifier
- Crossover Control: rotary control
that allows you to adjust the crossover from 50 to 150
Hz
Inputs:
- Input: left and right RCA
jacks; these jacks allow speaker-level input when
the supplied RCA high-level input wires are
connected
- EBC: mini-jack for use with
supplied external bass control
- Harness: 3-pin jack for
use with supplied wiring harness
- Fuse: installed 20A ATC
fuse
Warranty
5 Year Warranty Terms: This product carries a 5-Year
Prorated Warranty with the following terms:
- Years 1-2: Products found to be defective in materials
or workmanship during the first two years will be, at Mitek's option,
repaired or replaced by Mitek at no charge. The warranty period does not
renew, but continues on from the original date of purchase.
- Years 3-5: The purchase price of an item which becomes
defective after the first two years and prior to the end of the warranty
period will be prorated and credited toward the purchase of a new MTX
product. The amount of proration is determined by dividing the original
purchase price by the number of months in the warranty period (60), then
multiplying the result by the number of months remaining in the warranty
period.
