sign in to your account | sign up for a new account | Rewards program
0 item: $0.00
Go to Cart
 
Shop the Outlet
 
Return to the main store
Email Call me Connect
1.888.955.6000
 
 
1-888-955-6000
crutchfield.com
Crutchfield

Free Shipping on Everything

60-Day Money-Back Guarantee  |  Lifetime Tech Support

Receiver Wire Harness

For select 1994-07 Dodge, Eagle, and Mitsubishi vehicles

Zoom
  • Receiver Wire Harness

    Front

  • Receiver Wire Harness
Does it fit my car?

Item# 120707003 offer details

By buying this product you'll earn up to 12 Rewards points.

When you sign up for a Crutchfield account, you’ll be enrolled in Crutchfield Rewards. You’ll earn one point for every dollar you spend on gear from us. You can turn your points into Rewards Cards that you can use toward future purchases. You can sign up for an account now, or after you complete your purchase (you’ll get credit for the points either way).

Share this product:
 
Metra

Installation Note: This harness uses your factory amplifier; your new stereo must have two pairs of preamp outputs to connect this harness.

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

First, attach the color-coded wires on your Crutchfield harness to the wires from your new stereo. If you don't know how to use a soldering iron, we recommend that you purchase some wire connectors that you'll use to attach the Crutchfield harness to your factory harness.

Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier, and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. A detailed instruction sheet comes with the harness. Warranty: 60 days.

Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.

See more info on this item

Note: Most vehicles will require additional installation parts — please identify your vehicle if you haven’t done so, then check here for a list of parts. You can also call an Advisor for more information.

 

Hands-on research from the Crutchfield Labs (what are the Labs?)

What’s in the box? | In-depth notes

Product Research

Product Research
What's in the box?

Download owner's manual

  • 8" Power harness
  • 10" RCA cable
  • Instructions

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Crutchfield Wiring Harness: Crutchfield wiring harnesses prevent you from having to cut your vehicle's factory radio plug when replacing your factory radio with an aftermarket head unit. Simply solder or crimp the Crutchfield wiring harness to your aftermarket head unit's harness (solder & crimps not included), plug the aftermarket head unit's plug into the rear chassis of the aftermarket head unit, and plug the Crutchfield wiring harness into your vehicle's factory radio plug.

Note: Installation tools, hardware, & accessories are not included & sold separately. Please see the Accessories tab for recommendations & availability.

Wiring Notes: If the Crutchfield wiring harness is not equipped with a ground wire, you will need to ground the aftermarket head unit's ground wire to the metal chassis of your vehicle. Some vehicle's may require you to bypass the vehicle's factory amplifier (in another location from factory radio) or hardwire certain connections. If your vehicle is equipped with factory steering wheel controls, an additional adapter is required & sold separately.

Wire Code Chart:

(Power Harness)

Wire Color Function
Red +12 Volt Accessory
Yellow +12 Volt Constant
Blue Power Antenna
Orange Illumination

(RCA Cable)

Wire Color Function
Blue/White Amp Turn-On
White RCA Left Front Channel
Gray RCA Right Front Channel
Green RCA Left Rear Channel
Violet RCA Right Rear Channel

Factory Amp Note: This harness includes RCA connections (instead of speaker wire leads) to connect the aftermarket head unit's preamp outputs to your vehicle's factory amp. Your aftermarket head unit must be equipped with front & rear preamp outputs.

No Ground Wire:The wiring harness does not included a ground wire. Ground your aftermarket head unit directly to the vehicle's metal chassis.

The Crutchfield Car Selector: Please visit the Crutchfield Car Selector for your specific type of vehicle.

 

Product Reviews

Review this product
Great Gear Giveaway rewards card

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

Reviews for the Receiver Wire Harness

Average Customer Review:

19 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
Sort by:
Showing: 1-19 of 19
View page: 1
5 out of 5

works ad advertised

Written By Fankee2, Atlanta , Ga on Monday, May 20, 2013
 
This adapter kit worked flawlessly. It interfaced perfectly between the Pioneer 2 din GPS unit and my 2001 Eclipse Spider GT wiring harness.

I'll definitely order from Crutchfield again.
Pros:
No issues what-so-ever Good documentation identifying wire-to-function
Cons:
None
Was this review helpful?    Yes | No
 
5 out of 5

Jorpamajo

Written By Jorge, Stamford, CT on Saturday, May 11, 2013
Crutchfield Customer Review (What's this?)
 
Very easy to use
Pros:
All
Cons:
None
Was this review helpful?    Yes | No
 
5 out of 5

Wiring harness for JVC into 2002 Eclipse

Written By Todd T., East Wenatchee, WA on Saturday, April 06, 2013
Installed in a 2002 Mitsubishi Eclipse
Crutchfield Customer Review (What's this?)
 
The wiring harnesses worked perfectly. HIGHLY recommend purchasing them. NOTE: when purchasing a unit for the Eclipse, make sure the unit has both front AND rear out puts so that the stock amp my be utilized. Also as a bonus, I was aware that the stock radio display would no longer be functional however the clock is still there.
Pros:
All's good
Cons:
None
Was this review helpful?    Yes | No
 
2 out of 5

It's a OK poduct...

Written By NickM, Huntington Beach,Ca on Monday, March 18, 2013
Crutchfield Customer Review (What's this?)
 
Part connecting to rear of the unit was good. But speaker connections are another story. Had to cut and solder speaker wires . My factory stereo output has six output coaxial(something similar). Cructhfield wire harness offers only 4 speaker output. Looks like a crossover takes place somewhere. But the sound cannot be distinguished from separate speakers. The sound is clustered between two front and one rear speaker.Subwoofer sound sound is very minimal. I may have to take it to a professional installer.
Was this review helpful?    Yes | No
 
5 out of 5

High quality interface to factory harness

Written By Mike, Goleta, CA on Friday, September 28, 2012
Crutchfield Customer Review (What's this?)
 
Interfaced perfectly with the Infinity sound (SSL package) on my Evo8. The connectors are nice and wire quality good.
Pros:
Fits.
Cons:
N/A
Was this review helpful?    Yes | No
 
1 out of 5

Wiring haness

Written By s w, sc on Monday, January 30, 2012
Installed in a 1998 Mitsubishi 3000GT
Crutchfield Customer Review (What's this?)
 
Love radio but was sent wrong wire harness and had to purchace one locally in order to get it in before my sons christmas :(
Was this review helpful?    Yes | No
 
5 out of 5

Works Perfectly

Written By Greg B., Glen Burnie, MD on Thursday, December 29, 2011
Crutchfield Customer Review (What's this?)
 
This integration harness worked perfectly for me. I installed my Pioneer DEH3200UB into my 2001 Galant GTZ and used the harness to connect the Infinity amp which is driving the seven speakers to the headunit. I also have a 12" Infinity Reference subwoofer I wanted to use, so I got two RCA Y-cables (has one male connector on one end and two female connectors on the other) and split my front preouts to connect all four RCA's to the front signal and used the rear signal for the subwoofer, so this harness CAN be used with a subwoofer! Just set the HPF on the deck so the inside speakers play no bass, and you are set, as the aftermarket radio will allow the volume to go higher than the stock headunit. Beautiful sound quality.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

PERFECT FACTORY FIT

Written By Z28guy, Munroe Falls, ohio on Wednesday, September 21, 2011
Crutchfield Customer Review (What's this?)
 
This worked perfectly to be able to use the factory Infinity amp without cutting up the harness. Many forums cried about the factory systems being hard to put aftermarket stuff on but this harness made it simple. A+++
Was this review helpful?    Yes | No
 
5 out of 5

How sweet is that

Written By Ray, N.E. IA on Thursday, April 07, 2011
Installed in a 2002 Mitsubishi Diamante
Crutchfield Customer Review (What's this?)
 
Almost as easy as plug & play. Oh wait a minute it is plug and play how sweet is
that :D
Was this review helpful?    Yes | No
 
5 out of 5

upgrading

Written By Jeremy V, Sparks, NV on Monday, November 22, 2010
Installed in a 2003 Mitsubishi Eclipse
Crutchfield Customer Review (What's this?)
 
The wire harness was the one I needed for my car. It had an upgraded factory infinity system
with an amp. all the connections were there and I am very happy with the advisor who
helped me figure out which harness I needed.
Was this review helpful?    Yes | No
 
5 out of 5

Great product,Made job easy

Written By lewdog916, Sacramento,CA on Thursday, October 29, 2009
Crutchfield Customer Review (What's this?)
 
This kit made the wiring job so much easier. I installed this kit in a '97 Eclipse Spyder convertible. When I got this car it had an old aftermarket stereo in the dash. This kit even came with the amplifier adaptor so I could use the factory amp I didn't even know I had. Everything came together so fast and easy thanks to this kit.
Was this review helpful?    Yes | No
 
5 out of 5

Receiver Wire Harness

Written By rick, Portsmouth va on Thursday, August 13, 2009
Crutchfield Customer Review (What's this?)
 
Easy to hook up, fit exactly.
Was this review helpful?    Yes | No
 
5 out of 5

Works Great!

Written By Dennis, Lebanon, MO on Thursday, April 09, 2009
Installed in a 2001 Mitsubishi Eclipse
Crutchfield Customer Review (What's this?)
 
I purchased a new pioneer stereo and bought a harness for the eclipse.
but i come to find out that i was getting no sound once i installed it. I found
out that i needed the Amp integration harness. I came to cruthcfield got
this Integration Harness for my eclipse, Received it yesterday and re-
installed evertyhing and everything Works! Everything sounds great!
Thanks Crutchfield for the help and the part I needed. I will definately be
coming back for all my stereo needs!
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

excellent

Written By Roberto, vallejo, california on Thursday, March 26, 2009
Installed in a 2001 Mitsubishi Eclipse
Crutchfield Customer Review (What's this?)
 
i ordered a kenwood 238 including the harness, i tell you boy! i just snap it to my existing wire on my 01 eclipse with infinity system, attached to the bracket, then put back the receiver in place, wella! i sounds terrific, me and my son was amazed that we did it by ourselves, oh! btw, i called the crutchfield help phoneline and they are superb, thanks a lot
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Mitsubishi Eclipse Wire Harness

Written By Marc, Arizona on Friday, January 23, 2009
Installed in a 1995 Mitsubishi Eclipse
 
Had the Infinity system in my '95 GSX, and used this harness when replacing the deck. This was great, plugged right in, made my life really easy. I've had to do all the wires in the past and that sucks, so this made things really fast.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
2 out of 5

ok for the right situation

Written By matt, ATL, Georgia on Saturday, December 27, 2008
Installed in a 2001 Mitsubishi Montero Sport
Crutchfield Customer Review (What's this?)
 
This connection works alright if you have the right stereo. If you want subs and your stereo doesnt have 6 outputs than this harness is useless. The speakers are hooked up to the RCA cables not the actual wire from the stereo. I tried cutting and attaching all sorts of connections but no matter what i did I either couldnt use my subs or I couldnt use my rear speakers. I didnt mind not using my rear speakers except they made a high pitch hum when not hooked up. If you dont want subs this makes the install really quick and easy. I had to return my stereo to crutchfeild so i could get one that has six outputs.
2 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Not a BAD harness, BUT....

Written By Brian, Rockledge, FL on Saturday, October 11, 2008
Installed in a 1998 Mitsubishi Eclipse Spyder
Crutchfield Customer Review (What's this?)
 
Well...It does fit the stock radio harness. But I had to go buy RCA female connections and solder them into the replacement radio's harness, so I could more easily connect the amplifier adapter to the radio replacement harness. The alternative was to cut the RCA male ends off, and attemt to separate the positive from the negative. I think just putting RCA female ends on the Kenwood's harness was easier for me to keep track of. You definately need to know your way around an electrical schematic, both for the original radio harness in the car and the one coming with what ever radio you're replacing it with. It gets a bit confusing, especially if your replacement radio requires a ground (and most do) because the crutchfield adapter does not have a ground wire. You'll have to use the one from your replacement radio harness. After I soldered the three harnesses together (the two from crutchfield and the one from the radio) it looked like a mess, but it worked fine.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
3 out of 5

Receiver Wire Harness

Written By JayH, Saint Louis on Thursday, October 09, 2008
Installed in a 2001 Mitsubishi Eclipse Spyder
Crutchfield Customer Review (What's this?)
 
Everything worked like a charm until I got to the wiring harness. I hooked it up but I had no power. After 1/2 hour of using my circuit tester I found that one of the wires in the harness was in the wrong slot. I removed the wire and moved it over and everything worked fine. Kind of annoying!
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
1 out of 5

Horrible 'adapter'

Written By Butch, Corpus Christi, TX on Monday, October 06, 2008
Installed in a 1994 Mitsubishi 3000GT
Crutchfield Customer Review (What's this?)
 
I've used Crutchfield install kits twice before and loved them. Made life easy. This time it was horrible. Its not a direct adapter to the harness, I still had to cut the speaker wires out of the stock harness and connect them to the Crutchfield adapter. The adapter only actually connects four wires of the whole bundle, the other 12 are speaker wires that I have to splice. Not to mention the fact Crutchfield doesn't have an install manual for my series of car (Mitsu 3000GT '91-99). And the kit came with the radio adapter, an amp adapter (which is actually nice and easy) and another adapter that attached to the stock harness, which like I said, is worthless as it only actually connects 4 of the 16 wires. Not happy with the kit.
3 out of 10 people found this helpful
Was this review helpful?    Yes | No
 
1-19 of 19

For a more in-depth review and enhanced detailed information on the Receiver Wire Harness, please visit the Crutchfield website product page (/S-edmOIwkZEV1/p_120707003/Receiver-Wire-Harness.html ).

Recommended Accessories See more accessories

Your featured item

Receiver Wire Harness
Receiver Wire Harness
For select 1994-07 Dodge, Eagle, and Mitsubishi vehicles
$11.99
In Stock
 
 

Installation Tools and Shop Supplies

Posi-Products™ Car Stereo Connectors
Posi-Products™ Car Stereo Connectors
16 connectors for installing a new car stereo
$6.99
In Stock
 
 
Add selected to cart
 

  • Front

    Receiver Wire Harness