Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Controls
Connections
Features
2Ω Stable: The GTA-602 can power a stereo load with 2Ω
impedance (4Ω minimum when bridged); the lower impedance offers higher output
power:
- 60 watts x 2 @ 4 Ω
- 100 watts x 2 @ 2 Ω
- 200 watts x 1 @ 4 Ω (bridged)
Controls and Terminals: All the controls and terminals are
conveniently mounted on one side of the amp.
Controls
Gain: Adjust the input sensitivity with this rotary control;
the range is 0.2 Volts to 5.0 Volts (line-level) or 0.4 Volts to 10.0 Volts
(speaker-level).
Crossover Switch: Choose high-pass, low-pass, or off (full
range) crossover.
Crossover Frequency: The crossover (low-pass or high-pass)
point is continuously variable from 50 Hz to 200 Hz; the slope is 12 dB/octave.
Q-Tune: Turn the Q-Tune bass boost on/off; the boost is +6
dB at 45 Hz.
Connections
Speaker-level Input: Use the included harness when the receiver
has no RCA outputs.
Line-level Input: Left and right RCA jacks for the input signal
from the head unit.
GTA-RSL: RJ-14 port; connect an optional GTA-RSL remote
level control (item number
065GTARSL,
sold separately); the GTA-RSL is only functional when the low-pass
crossover is engaged.
Speaker Output: Two pair of set-screw terminals provided for
connecting the speakers; the terminals can accept up to 8-gauge wire; the set
screws are tightened/loosened with the supplied 3mm Allen wrench.
ATO Fuse: A single 20-amp ATO-type fuse is located between
the speaker and power terminals.
Power/Remote: Three set-screw terminals for connecting power,
ground, and remote wires; each terminal accepts up to 8-gauge wire; the set screws
are tightened/loosened with the supplied 3mm Allen wrench.
