Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Inputs and Outputs
Features
Class D Design: The MRP-M350 is
a Class D amplifier, which operates more efficiently by turning more voltage
into useable power, and generating less heat.
Power Supply: The power supply
uses MOSFETs to convert DC battery voltage to the higher DC voltages
needed for high power. It supplies positive and negative voltages around 0V,
rather than around 6V as with conventional single-polarity power supplies. The
result is higher power levels and a dynamic range wider by as much as 10dB.
Low Pass Crossover: The
internal crossover is a 24dB/octave low pass filter variable from 50Hz to 200Hz.
There is no on/off switch for this crossover, thus it is constantly active.
Subsonic Filter: This amp
utilizes a 15Hz subsonic filter to eliminate super low frequencies that can rob
power and damage speakers.
Bass EQ: The Bass EQ circuit
provides a boost of 0-12dB at 50 Hz.
Inputs: The amplifier offers
both line-level and speaker level inputs. The supplied speaker-level input
harness allows you to connect this amplifier to a receiver without preamp
outputs, either aftermarket or factory.
RCA Cover: The amp comes with a
plastic cover that protects and insulates the RCA connections. Two supplied
machine screws attach the cover to the amplifier.
Inputs
and Outputs
Left Side Of Amplifier:
- GND (ground): Gold-plated
terminal strip, 0.33" wide
- Battery: Gold-plated
terminal strip, 0.33" wide
- Remote: Gold-plated terminal
strip, 0.33" wide
- Speaker Outputs: Gold-plated
terminal strips for 1 speaker, 0.33" wide
Right Side Of Amplifier:
- Line Input: Gold-plated
stereo RCA jacks
- Speaker Level Input: Molex
plug input for included harness