Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Inputs and Outputs
16:9 High Density Wide Screen
Display: The TME-M760 16:9 Widescreen video monitor features a 6.5"
wide (diagonally measured) LCD screen. It has 280,800 high-resolution pixels
(1200 horizontal x 234 vertical) to give you excellent detail. The ultra-bright
back lighting system assures you the picture won't wash out during daylight
120-Degree Wide Viewing Angle: The
LCD screen offers a clear viewing angle of 120 degrees, and the low reflective
panel gets rid of annoying glare from windows or lights.
Display Modes: You can select
any of the four display modes to fit the aspect ratio of the selected video
- Normal: Images are displayed
in a 4:3 aspect ratio with black bars on the left and right edges (Pillar
- Wide: Normal images are
expanded uniformly in the horizontal direction and displayed over the entire
- Zoom: Normal images are
enlarged until they fill the screen. Some portion of the top and bottom of
the image is cut off.
- Cinema: Widescreen (16:9)
images fit perfectly, while normal images contain black bars at the top and
bottom (Letter box).
Auto Dimmer: The TME-M760
monitor has an illumination sensor on the front panel which detects the amount
of light inside the vehicle and automatically adjusts the brightness of the
screen. By using the built-in menu, you can set limits on the high level and low
level of brightness of the screen in the automatic mode.
Audio/Video Inputs: The monitor
has 3 auxiliary A/V inputs (each with stereo audio and composite video) and a
dedicated input for a compatible Alpine Navigation System. Each input features
independent picture and volume settings that can be stored in memory. Note: Auxiliary
input 3 can be connected to an optional rear-view camera which can automatically
turn on when the vehicle is put in reverse gear.
Selectable Auxiliary Output: This
unit's menu system allows you to select which source (including navigation) is
output through the auxiliary outs. You can connect a separate monitor or video
recorder to the auxiliary output.
NTSC/PAL Compatible: You can
switch the monitor to display NTSC or PAL to match the video system from each
Built-in Speaker/Amplifier: The
monitor has a built-in speaker (approximately 1.25" diameter) on the
monitor's rear panel and an internal amplifier. You can turn on/off the speaker
through the menu. There is also an option to listen through headphones (plugged
into the A/V Interface unit).
Mounting Options: The TME-M760
video monitor comes with a flush-mount headrest bracket and trim bezel. You can
also use the supplied L-bracket to assist you with any other custom mounting
options you may have.
IR Remote Sensor: On the front of the monitor, there is an infrared remote sensor. When connected to an Alpine video source with a remote control input lead, this monitor system can relay remote commands from the sensor to the video source.
Front Panel Controls:
- Power: On/Off switch with
LED power indicator
- Volume: Raises and lowers
volume of built-in speaker or headphones
- Source: Choose between Aux
1, Aux 2, Aux 3 or Navigation
- Display Mode: Choose between
Normal, Wide, Zoom or Cinema
- Adjustments: Cycle through
the following adjustments: Brightness, Color, Tint, Dimmer, Auto Hi-Level,
Auto Lo-Level, Aux Out, Sound Out, and Volume Offset
A/V Interface Unit Connections: In
addition to the attached 6.5' Display Output cable, the connections on the A/V
Interface Unit include:
- 3 A/V Inputs: Left and right
audio plus composite video inputs for Aux 1, Aux 2 and Aux 3
- Navigation Input: Proprietary
13-pin input for Alpine Navigation System
- A/V Output: Left and right
audio plus composite video output (selectable source through menu)
- Headphone Output: Female
stereo mini-jack headphone output
- Power Supply: 8-pin Molex
connector for supplied Power/Ground harness (harness includes power with
in-line 7.5A fuse, ground, remote out--Aux 1, remote out--Aux 2, remote
out/back cont in--Aux 3, foot brake and hand brake)
Monitor: Width= 6.962",
Height= 3.93", Depth= 1.282"
Monitor In Bracket: Width=
7.833", Height= 4.75", Depth= 1.563"
Cutout Required (for Flush Mount): Width=
7.611", Height= 4.441", Depth=1.442"
A/V Interface Unit: Width=
7.718", Height= 1.124", Depth= 7.183" (including cables)