Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Mounting Options

Features

High Efficiency: The KL-6504-THX's titanium horn-loaded tweeter is mated to the woofers using precision-voiced high-definition crossover networks creating high sensitivity. This makes the speaker easier to drive so it requires a lot less amplification power than conventional designs. The high-efficiency design of the Kirsch in-wall speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 92dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.

3-Way Speaker Design: The KL-6504-THX uses a premium 1" Titanium compression driver (tweeter) mated to an exclusive Tracery Horn, combined with four 5.25" fiberglass woofers in a 3-way design.

• 1" Titanium Tweeter: The KL-6504-THX utilizes a 1" Titanium dome compression tweeter mated to a 4" square, Tracery Horn, which disperses the sound 90° horizontally and 90° vertically into the room. The horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy.
• Four 5.25" Woofers: The KL-6504-THX employs four high-output 5.25-inch fiberglass woofer cones for powerful bass impact.

ABS Frame/Metal Grille: The KL-6504-THX has a sturdy ABS frame assembly and a deluxe MDF baffle with brushed aluminum fascia. The frame and metal mesh grille can be painted to match any decor.

Speaker Terminals: The speaker has a gold-plated pair of spring-loaded binding posts that can accept up to 12-gauge wire, single banana plugs, or pin connectors.

Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 150 watts RMS (600 W Peak). Klipsch has also published a recommended amplifier power specification as 200 watts. For the purpose of matching the speaker with the best amplifier, Crutchfield is listing the power specification of 150 to 200 watts.

Mounting Options

Dual Orientation: The KL-6504-THX in-wall speaker can be mounted horizontally or vertically; and can be used as a front, center, or rear speaker.

New or Pre-Existing Installation: The in-wall speaker can be installed in new or existing construction. It requires a cutout diameter of 6.5625" wide x 27.125" high, with a mounting depth of 3.625". A cardboard template is supplied to measure cutout opening. For existing construction, the speaker should be installed in drywall (or other mounting surfaces) at least 1/2" thick. The Kirsch in-wall speaker features eight sure-grip mounting dogs (clamps) that provide even pressure against drywall for long-term installation reliability. For new construction, purchase of the IK-504-W installation kit (714IK504W, sold separately) is highly recommended.