Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Edge Driven: The 3/4" edge-driven tweeters use textile soft domes. An edge-driven tweeter has better dispersion characteristics and allows for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity.

Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:

• I-Mount Tweeter Mounting System: The tweeters can be surface or flush mounted with Infinity's innovative I-Mount system:
  • Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
  • Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount adapter and plastic locking nut. Once a cutout is made, the flush-mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
• Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
  • Surface Mount (behind grille panel)
  • Flush Mount (behind grille panel)
  • Bottom Mount (to grille panel)
  • Flush Mount (in-dash location)

Tweeter Mounting Dimensions:

Crossover Connections: The crossovers have screw terminal inputs and outputs and will accommodate bare wire or spade connectors up to 0.325" wide.

Crossover Dimensions:

• Length: 2.406"
• Width: 1.182" (1.576" including mounting tabs)
• Height: 1.008"

Power Handling: Although Infinity lists the RMS power handling as 50 watts, they also list the recommended power range as 5-75 watts RMS. We've opted to list the more conservative 50 watt RMS figure on the specifications page.