Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
General Overview: This is a
dual amplifier wiring kit that includes 4-gauge and 8-gauge power cables, an
8-gauge ground cable, a turn-on lead, a power distribution block and accessories
required to install two amplifiers. Speaker wire and patch cords are sold
separately.
In-line Fuse Holder: The
in-line fuse holder is waterproof and comes with a 100-amp AFS fuse. The fuse
holder's set screw input and output accept bare 4-gauge wire (no ring terminal
required). Integrated tabs allow you to mount the fuse holder using optional
self-tapping screws. The fuse holder has the following dimensions: L=3.335",
W=1.887" (including integrated mounting tabs), H=0.994".
Note: The set screws
require 3mm and 5/32" Allen wrenches.
Distribution Block: The
distribution block has three 4-gauge inputs and four 8-gauge outputs. For
flexibility during installation, one input is located on the front of the
distribution block and the other two are located on the sides. When you run
wire, you only need to use one of the inputs. Two holes in the distribution
block's base allow you to mount it using optional self-tapping screws. The
distribution block has the following dimensions: L=2.065", W=2.194", H=0.835".
Note: The set screws
require 3mm and 5/32" Allen wrenches.
Power and Ground Cables: The
4- and 8-gauge power cables have translucent red insulation jackets while the 8-gauge
ground cable has a clear insulation jacket.
Remote Turn-on Wire: The
18-gauge remote turn-on wire has a blue insulation jacket.
Crimp-on Terminal Dimensions:
The crimp-on terminals have the following dimensions:
- Power Ring Terminal
(installed): W=0.654", Inner Diameter=0.335"
- 8-gauge Ground Ring Terminals:
W=0.477", Inner Diameter=0.214"
- 8-gauge Spade Terminals:
W=0.327", Prong Spacing=0.152"
- 18-gauge Spade Terminals:
W=0.275", Prong Spacing=0.147"