About the Kicker ZX460
Kicker's built the ZX series amplifiers to thrive in the brutal environment of your vehicle's interior. The ZX460 produces 30 watts x 4 channels to all your full-range speakers, or drives your subwoofers with up to 180 watts x 2 (at 2 ohms) in bridged mode. Go ahead put this amp to work! The ZX460's unregulated power supply allows it to pump out big power at lower impedances (as low as 1-ohm stereo or 2-ohms mono) that would make a lesser amp beg for mercy.
The automatic bridging feature simplifies adapting the amp to your system. The rear channels feature a built-in high-pass crossover (100 Hz, at 24 dB per octave). A quality assurance certificate comes with the amp to prove it meets and exceeds Kicker's strenuous tests for power and performance.
Details:- 2-, 3-, 4-channel output
- Tri-way capable (Tri-Way crossover required)
- 30 watts RMS x 4 at 4 ohms
- 60 watts RMS x 4 at 2 ohms
- 90 watts RMS x 4 at 1 ohm
- 120 watts RMS x 2 at 4 ohms in bridged mode
- 180 watts RMS x 2 at 2 ohms in bridged mode
- stable to 1 ohm in stereo, 2 ohms in mono mode
- frequency response 10-28,000 Hz
- MOSFET power supply
- requires 8-gauge power and ground leads wiring and hardware not included with amplifier
- rear channel switchable high-pass crossover (100 Hz at 24 dB per octave)
- discrete output transistors
- silent turn-on/off circuitry
- removable endcaps and logo plate
- 14-9/16"W x 3-1/16"H x 10"D
- 1-year warranty
What's in the box:
- Black amp w/ silver trim
- Two 30-amp bayonette fuses
- 11 set screws
- Allen wrench
- Manual
- Survey/Registration card
- Total Quality Management certificate
Customer reviews for Kicker ZX460
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker ZX460
Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) |
30 x 4 | |
Peak Power Output (Watts x Channels) | 90 x 4 | |
Power at 2 Ohms (Watts x Channels) | 60 x 4 | |
Power at 1 Ohm (Watts x Channels) | --- | |
Bridged Power (Watts x Channels) | 120 x 2 | |
Minimum Impedance Bridged | 2 | |
Minimum Impedance Unbridged | 1 | |
Minimum Impedance | 1 | |
Best Frequency Response | 10-28k Hz | |
THD at Rated RMS Power | 0.02% | |
Signal to Noise Ratio | 100 dB | |
Input Voltage | --- | |
Features | ||
Amplifier Class | AB | |
Low-Pass Crossover Frequency | N/A | |
Low-Pass Slope (dB/octave) | N/A | |
High-Pass Crossover Frequency | 100 Hz | |
High-Pass Slope (dB/octave) | 24 dB | |
Bass Boost | No | |
Bass Boost Frequency | N/A | |
Fan Cooled | No | |
Fuse Rating | 30 x 2 | |
Speaker Level Inputs | --- | |
Preamp Outputs | 1 pair | |
Width (inches) | 14-9/16 | |
Height (inches) | 3-1/16 | |
Depth (inches) | 10 | |
Parts Warranty | 1 YR | |
Labor Warranty | 1 YR |
Product Research
Specifications
Input impedance: 22 kohms
Maximum distortion at Rated power, 4 ohm stereo, 12.5-16VDC: 0.02%
Rated power 1 ohm stereo: 90 x 4
Rated power 2.66 ohm bridged: 180 x 2
Rated power 2 ohm bridged: 180 x 2
Features
Speaker and power connections will accept up to 8 gauge wire. For larger wire use power distribution block
Kicker logo on top of unit is removable, can be placed where desired on amplifier
Requires four #8 screws (not included) for mounting
Parallel Inputs: When RCA
cables are plugged into Amp 1 input, the amp automatically distributes left
channel to Amp 1 left and Amp 2 left and right channel to Amp 1 right and Amp 2
right. Plugging in a second set of RCA's automatically switches unit to discreet
4 channel operation.
Crossovers: Amp 2 has a 100Hz, 24dB/octave high-pass crossover built in.
This crossover is accessed on bottom of amp under a plastic plug and can be
turned on or off by a 2 position switch. The crossover frequency is set by a
frequency programming chip which can be removed and replaced
Amp 1 gain: variable gain control
Amp 2 gain: variable gain
control
RCA stereo gold plated Amp output: Used to daisy chain amps
Module docking port: Allows the use of an optional Kicker module
including the SWX, MRX, TWX, EEM, EQM, CRM, and RGM
Protection types: Thermal Protection, Overvoltage, Reverse polarity,
Short circuit protection
Note: Warranty is extended to 3 years if installed by an authorized Kicker dealer
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...