Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The XSVI-1784-NAV interface module provides a
10-amp, 12-volt accessory output along with outputs to install an aftermarket
navigation radio in select 2007-2009 Dodge vehicle without amplified systems or
when the factory amplifier is being removed.
Vehicle Compatibility: The XSVI-1784-NAV interface module is
compatible with the following 2007-2009 Dodge vehicles (without amplified
systems or when replacing the factory amplifier); as of 5/17/2012.
Note: Please consult Crutchfield's
Outfit My Car to see if your vehicle is compatible.
Accessory Output + R.A.P.: In the Doge vehicles listed above, there
are no 12-volt accessory wires currently in the factory harness making the
installer run an accessory wire to the fuse box or underneath the steering
column when installing an aftermarket radio. The XSVI-1784-NAV is designed to
provide a 12-volt, 10-amp switched accessory output along with the rest of the
wires needed to install an aftermarket radio. The R.A.P. (Retained Accessory
Power) function, where power is supplied to the radio after the ignition is
shut-of until on of the front doors are opened, is retained by the
Aftermarket Navigation Compatible: The XSVI-1784-NAV also provides
essential wires required for aftermarket radios that have navigation. Provided
are VSS (Vehicle Speed Sense), Reverse, and Parking Brake, This cuts down the
installation time since the installer does not have to look for these wires in