Audio Section
Built-in Bluetooth
HD+Internet+SiriusXM Radio
iPod/Android/AUX Integration
Disc & USB Playback
Display Features
Remote Control
Audio Section
Excelon Series: The KDC-X797 CD receiver is part of
Kenwood's Excelon series line-up. It incorporates the latest technologies and
delivers the highest sonic performance. From advanced audio tuning capabilities,
crossover and equalizer system, high-voltage preouts (4V), and a two-year
warranty - Kenwood Excelon represents exceptional audio quality with
long-lasting dependability.
24 Bit D/A Converter: The Kenwood Excelon KDC-X797 utilizes
a 24-bit digital to analog converter for superior sound quality.
MOSFET Amplifier: The Kenwood Excelon KDC-X797 is equipped
with a MOSFET amplifier. Compared to conventional power supplies, the MOSFET
amplification circuit is smaller and more efficient, and it delivers increased
power with less distortion and absolutely zero on/off switching noise. More
power means louder and cleaner music at higher volumes because you're not
pushing the limits of the amplification circuit. The power output specs for the
KDC-X797 are as follows:
- Full Bandwidth Power: 22 watts RMS x 4 channels (at 4
ohms, 20-20kHz, 1% THD)
- Maximum Output Power: 50 watts x 4 channels
6ch/4V Preamp Outputs: The KDC-X797 features front, rear and
subwoofer 4.0-volt preamp outputs. The front and rear speaker preamp outputs are
balance and fade adjustable. The subwoofer preamp output is non-fading. The
front, rear, and subwoofer preamp outputs are fixed to the rear chassis of the
head unit.
Front & Rear High-Pass Filter: The KDC-X797 features a
High-Pass Crossover for the front & rear channels when your front & rear
speakers are connected by the unit's speaker-outputs or preamp-outputs. You can
adjust the high-pass crossover from "Through", 100, 120, or 150 Hz. The
"Through" selection is a full-range setting.
Subwoofer Controls: The Kenwood Excelon KDC-X797 offers the
following subwoofer controls, when you are using unit's subwoofer preamp output.
- Low Pass Filter: The receiver features a built-in Low
Pass Filter control for the preamp-output, when the output is set to
Subwoofer. You can select from 85 Hz, 120 Hz, 160 Hz, or off.
- Subwoofer Phase: You can adjust the phase of the
subwoofer output between 180-degrees (Reverse) or 0-degrees (Normal).
- Subwoofer Level: Once the Subwoofer preamp output is
activated, you can independently control the subwoofer preamp output level
(-15 to +15) from the CD receiver.
Speaker Settings: The Speaker Setting function tailors the
head unit's audio settings according to the type of speakers in your vehicle.
You may select a Speaker Setting of 'SP-Off' (flat/off), 'SP-OEM' (for OEM
factory speaker systems), 'SP-6x9/6' (for systems with 6" and 6"x9" speakers),
or 'SP-5/4' (for systems with 4" and 5" speakers).
EQ Pro: The KDC-X797 is equipped with Kenwood's EQ Pro. The
integrated equalizer offers 8 preset sound modes (Natural, Rock, Pops, Easy, Top
40, Jazz, Powerful, and User) suitable for the music genre of your choice. The
User mode allows you to manually adjust the head unit's 3-band parametric EQ
(Frequency, Level, and Q-Factor).
|
EQ Pro |
|
Frequency |
Level |
Q |
|
Bass |
60, 80, 100, 200 Hz |
-8 to +8 |
1.0, 1.25, 1.5, 2.0 |
|
Midrange |
0.5, 1.0, 1.5, 2.5 kHz |
-8 to +8 |
0.75, 1.0, 1.25 |
|
Treble |
10.0,
12.5, 15.0, 17.5 kHz |
-8 to +8 |
Fixed |
Note: You can store EQ Pro bass, middle and treble tone
settings for each source (Disc, Tuner, Aux, USB, iPod, and Pandora).
Sound Enhancements: The head unit provides further sound
enhancements for your car audio system.
- Bass Boost: The Kenwood CD receiver features a Bass
Boost control that can be set to the following levels (BB1, BB2, BB3, or
Off).
- Loudness: This function enhances low and high
frequencies to make the sound clearer lower volumes. There are 3 levels
(LV1, LV2, or Off).
- Supreme Setting: When MP3 or WMA files encoded at a low
bit rate (less than 96 kbps, 44.1k, 48kHz) are played, the Supreme Setting
function restores their high frequencies so the sound quality is closer to
files encoded at a high bit rate. The processing is optimized for the
compression format and the bit rate used. When the Supreme Setting is Off,
the unit plays the original sound stored in the audio file.
Volume Offset: The level of each source may be independently
adjusted to prevent radical leaps in output volume when switching from one
source to another. The available settings range from -8 to 0 (-8 to +8 for Aux
source).
Key Beep: The in-dash head unit provides an audible beep to
confirm button operation. This function can be turned On or Off.
Built-in Bluetooth
Bluetooth Technology: The Kenwood Excelon KDC-X797 is equipped
with built-in Bluetooth (ver. 2.1 + EDR) allowing you to make and receive phone
calls wirelessly through the receiver; as well as stream music wirelessly from
your smartphone to the head unit. In order to use Bluetooth wireless
technology, your phone must also be Bluetooth compatible and be able to
interpret certain profiles. This unit is compatible with the following Bluetooth
Profiles:
- Hands-Free Communication: HFP 1.5 (Hands Free Profile), OPP
1.1 (Object Push Profile), PBAB 1.0 (Phone Book Access
Profile).
- Audio Streaming: A2DP 1.2 (Advanced Audio Distribution
Profile), AVRCP 1.3 (Audio/Video Remote Control Profile).
Note: Due to the differences in Bluetooth technology, some
Bluetooth enabled devices may be incompatible, function improperly, or may
not support all features when used with the Kenwood Excelon KDC-X797. Visit
Kenwood's
Support Site for a complete list of
compatible Bluetooth enabled phones.
SPP (Secure Simple Pairing): With Secure Simple Pairing
(SSP), you can easily pair a Bluetooth enabled phone to the Kenwood Excelon KDC-X797
without having to enter pin codes or go through complicated settings. When a
registered Bluetooth device is in close proximity to the receiver, the auto
connection function automatically pairs the two units. You can register up to
five Bluetooth-enabled devices with the Kenwood head unit. A maximum of two
Bluetooth-enabled phones can be connected at one time, but only one can be used
at a time.
Bluetooth Hands-Free Communication: The head unit supports
Bluetooth hands-free communication for your Bluetooth enabled mobile phone. The
controls of the KDC-X797 can be used to dial a number, answer an in-coming
call, or end a call. The unit also includes an external microphone (featuring
adjustable gain), so you can carry on your side of the conversation while
listening to the caller through your vehicles speakers. During a conversation,
you can switch between the Private Mode (talking directly on your cell phone)
and the Hands Free Mode.
- Answering a Call: When a call comes in, a ring-tone
will be heard through your vehicle's speaker and the caller's name or phone
number will be displayed. You can answer the call from the head unit's
front-panel controls, or setup the head unit to automatically answer the
incoming call immediately or after 1-99 seconds. The KDC-X797 also
supports the Call Waiting function, so you can answer another incoming call
while suspending the current call you are on. Your compatible cell-phone
must also support this feature.
- Dialing a Number: Using the KDC-X797, you can dial a
phone number in one of the following ways:
- Entering a Phone Number: Allows you to directly
dial a phone number up to 32 digits from the head unit's control knob or
remote control.
- Speed (Preset) Dialing: Allows you to register up
to 6 phone numbers for quick dialing. The preset numbers can be accessed
from the head unit's Control Knob.
- Phone Book: You can dial by using the downloaded
phone book. You can download phone book data from your cell phone to the
KDC-X797. Up to 600 numbers can be stored for each registered cell
phone. Each number can be up to 32 digits long and each name can be up
to 50 characters long. Stored phone numbers can be categorized by
General, Home, Office, Mobile, or Other. You can search each category of
the phone book in alphabetical order.
- Call History: The Call History is a list of calls that have
originated from and were received by this unit that you can dial. You
can select Outgoing, Incoming, or Missed calls.
- Voice Dialing: If your mobile phone supports voice
recognition, then you can dial out by voice command. Simply speak into
the included microphone.
External Microphone: The Kenwood Excelon KDC-X797 includes an
external microphone to carry on your side of your phone conversation and voice
command dialing. The external wired microphone offers improved audio quality
versus an integrated microphone, so you can be heard easier over noisy traffic
and road noise. You can adjust the volume level and noise cancellation of the
microphone without affecting the other sources. The external microphone features
an attached 10' cable terminated by a right-angle 3.5mm connector which plugs
into the mic input on the rear-panel of the head unit. The microphone offers an
integrated mounting bracket which can be clipped to your vehicle's sun-visor or
taped to your dash. The external microphone measures 0.525" (diameter) x 1.505"
(depth).
Note: This unit does not offer an integrated
front-panel microphone.
SMS: If your Bluetooth enabled mobile phone is compatible
with SMS (Short Message Service), the Kenwood head unit will notify you when a
message has been received. You must then use your phone to check the message.
You cannot read, edit, or send a message through this unit.
Wireless Audio Streaming (w/ Metadata Display): The Kenwood
KDC-X797 also supports wireless audio playback (AD2P) and control (AVRCP) of a
Bluetooth enabled audio player or smartphone. The KDC-X797 will be able to
control basic playback functions of your Bluetooth device's stored music; such
as Play/Pause, Skip Next/Previous, Fast Forward/Rewind and Random/Repeat. The
head unit will also display your stored music's song information; such as Artist
name and Song/Album title. The KDC-X797 also supports audio streaming of music
apps downloaded on your smartphone with metadata display and limited control.
Advanced music control of your music apps will still need be done via your
Bluetooth-enabled smartphone. When an incoming call or outgoing call is in
progress from your Bluetooth enabled mobile phone, audio streaming will be
paused so you can take your call. Once the call is finished, your streaming
music will resume.
Siri Digital Assistant Control: When paired and connected
with an iPhone 4S/5 via Bluetooth (not USB), the Kenwood KDC-BT55U has the
ability to access Siri through its front-panel controls and external microphone.
Simply press-and-hold down on the head unit's Answer Button to engage Siri and
use the included microphone to communicate with Siri. Siri's voice will heard
through your vehicle's speakers. All Siri functions including hands-free
calling, music search, setting reminders, text-messaging, audible navigation,
and more can be done through the KDC-X797 and its microphone. The head unit's
display will only indicate hands-free calling and Bluetooth audio information
(all other functions of Siri are only audible through the Kenwood Excelon KDC-X797;
visual data will still need to be viewed from your iPhone device).
Note: You can ask Siri to get directions to a destination
and the turn-by-turn instructions will heard through your vehicle's
speakers, while the on-screen map still displays on your iPhone 4S/5. The
head unit's audio is attenuated while Siri provides audible directions.
Bluetooth Detailed Settings: The KDC-X797 offers the
following Bluetooth Detailed Settings, so you can configure the unit to suit
your needs.
- Bluetooth Audio: You can allow Bluetooth audio to be
heard from only the front-speakers or all the speakers in your vehicle.
- Call Beep: You can choose to output a beep from your
vehicle's speaker's when a call comes in, or you can turn this function off.
- Echo Level: You adjust the echo cancellation delay time
until the least echo is being heard during a phone conversation.
- Mic Gain: Adjusts the volume of the external
microphone.
HD+Internet+SiriusXM Radio
Built-In HD Tuner: With its built-in HD Radio tuner, you can
receive digital AM/FM broadcasts from local stations where available. HD Radio
significantly improves AM/FM audio quality and reception, as well as includes
information such as artist name and song titles or traffic news, viewable on the
receiver's display. HD Radio Technology will deliver high-quality digital sound.
AM digital will have FM-like quality in stereo (70dB SN @ 40-15kHz), while FM
digital will have CD-like quality (70 dB SN @ 20-20kHz) with static free and
clear reception. The unit's built-in HD Radio tuner allows analog AM/FM tuning
as well.
- Tuning Methods: You can setup the KDC-X797 to tune both
analog and digital radio stations (Auto), only HD Radio stations (Digital), or
only analog radio stations (Analog). The CD receiver offers a variety of tuning
options; including Seek, Presets, and Direct Access.
- Seek Modes: You can choose one of three seek modes: Auto 1
(seek tuning), Auto 2 (cycles through and tunes the selected band's preset
stations only with each button press), or Manual.
- Tuner Presets: The unit's tuner features 3 FM banks
(1, 2, 3) and 1 AM bank for storing presets. Not only does the CD receiver's tuner allow you manually
enter your desired presets you can choose to have the unit automatically
put stations with good reception in the memory banks automatically; this
is a handy feature when traveling. The Kenwood KDC-BT952HD offers two
preset modes.
- Normal: You can store 6 presets for each AM/FM
bank giving you a total of 18 FM presets and 6 AM presets (total of
24).
- Mix: A total of 6 preset stations can be
assigned to the head unit's 6 preset buttons, regardless of AM/FM
band. This lets you recall a preset station without switching
between bands.
- Direct Access: You can directly access an AM/FM
station by entering in the frequency number using the include wireless remote
control.
- Station Text: AM/FM digital stations can offer text and data
such as artist names and song titles.
- Multicasting: In addition to conventional broadcasts, with
HD Radio broadcasting it is possible to choose from up to 8 multicast programs
(HD1 to HD8).
- iTunes Tagging: It is possible to save the song's
information (tag) from and HD Radio broadcasting station to your USB-direct
connected iPod/iPhone. The songs will show up in a playlist called "Tagged" in
iTunes (7.4 or later) the next time you sync your iPod/iPhone. Then you can
directly buy the songs you want from the iTunes Music Store. Your iPod/iPhone
must have at least 50MB of free space to "tag" and transfer songs. You can "tag"
up to 50 songs.
Note: HD Radio is the system for digital AM and FM
broadcasting in the U.S. More than 2,000 radio stations are broadcasting
their primary signals in digital HD Radio technology, as a free service. Go
to HDRadio.com to
check for HD Radio stations in your area.
Internet Radio Apps: The Kenwood Excelon KDC-X797 allows you to
access Pandora,
iHeartRadio, and
Aha Radio online music
services through your USB-connected iPhone or Bluetooth-connected
Android/Blackberry smartphone. Your Apple iPhone must be connected to the
KDC-X797 via the Kenwood KCA-iP102 cable (sold separately, or the cable supplied
with your iPhone. Your Android or Blackberry smartphone must support A2DP/
AVRCP/SPP Bluetooth profiles and be paired with the Kenwood Excelon KDC-X797. Your
iPhone, Android smartphone, or Blackberry device will need an active Data Plan
account with connection to the Internet via 3G, EDGE, or WiFi.
- Pandora App (for iPhone/Android/Blackberry): The free
Pandora App (either from
iTunes Apps,
Google Play, or
BlackBerry App World) lets you play music from the Pandora music service
through the Kenwood Excelon KDC-X797 using your USB-connected Apple iPhone (iOS3+)
or Bluetooth paired Android/Blackberry smartphone. The Kenwood Excelon KDC-X797
provides control over the Pandora music service and displays Artist, Album,
and Song information. You can select Pandora stations from your station list
and sort them by date or alphabetically (A-Z). New stations can be created
based on the current songs or artists playing. You can also save 3 Pandora
stations as presets. You can also skip song tracks within a station. You can
even give songs a thumbs up or thumbs down. An active Pandora account is
required.
- iHeartRadio Link (for iPhone/Android): The free
iHeartRadio Link app for Kenwood (either from
iTunes Apps or
Google Play) lets you play music from the iHeartRadio music service
through the Kenwood Excelon KDC-X797 using your USB-connected Apple iPhone (iOS
5.0+), or Bluetooth paired Android smartphone (2.2+). The iHeartRadio music
service provides access to more than 1,500 live radio stations from
coast-to-coast (including pop, country, urban, rock, talk, and sports). The
KDC-X797 will provide control over the iHeartRadio Link app, as well as
display station identification and song/artist information. From the head
unit's front-panel controls, iHeartRadio stations can be searched by the
following categories (Local, Genre, City, or My Stations). The
Local selection provides a list of radio stations in your local
listening area. The unit also provides over 22 Genres to choose from
(including pop, country, hip-hop, jazz, etc.) to help you find the right
radio station for you. In addition, you can search for radio stations by
City. Cities can be searched alphabetically (A-Z). You can even store
your favorite stations (My Stations) for easier, quicker access. An
active iHeartRadio account is required.
- Aha Radio App (for iPhone/Android): The Kenwood CD
receiver offers compatibility with the free Aha Radio app for your
USB-connected iPhone (iOS 4.3+) or Bluetooth-paired Android smartphone
(2.2+); available from
iTunes
Apps or
Google Play. Aha Radio provides you with up to the minute content made
available from the convenience of Kenwood's front-panel controls and LCD
screen. Listen to the latest Facebook updates or Tweets from your friends.
Listen to thousands of stations that include internet radio, podcasts, and
audiobooks. Receive traffic information, restaurants and coffee locations
personalized to you instantly, safely, and easily. An active Aha Radio
account is required.
Note: Access to these Internet Radio services will depend
on the availability of a cellular and/or WiFi network for purposes of
allowing your iPhone or Android/Blackberry smartphone to connect to the
Internet. Not supported in Canada and only available in the United States.
SiriusXM Ready: The Kenwood Excelon KDC-X797 comes ready for
SiriusXM programming with access to XM and Sirius Satellite Radio stations.
Thanks to its proprietary SiriusXM Connect port, you can add the optional
SXV200V1 SiriusXM Connect tuner and receive more than 150 channels of
exclusive programming directly from SiriusXM, via the "SiriusXM
All Access" package (subscription required). Visit
SiriusXM.com
for a complete list of subscription options and channel guide. Additional
features of the SXV200 SiriusXM Connect tuner include:
- Channel list displays a list of all available channels
- Category Search searches for channels in a certain category
- Displayed Information such as Channel Name, Artist Name, & Song Title
can be viewed on the head unit's LCD
- Up to 18 SiriusXM Satellite Radio station presets
- Direct Tuning via included remote
- Supports the SiriusXM Instant Replay function, so you can pause, rewind,
and replay up to 30 minutes of live content
- Channels containing unsuitable content for children can be blocked
Note: A separate SiriusXM Satellite Radio subscription
is required (operates on the XM Network). However, you can easily add this
SiriusXM tuner to an existing Sirius or XM account for a Multi-Radio
Discount Plan.
iPod/Android/AUX Integration
iPod Direct Connection w/ DAC Bypass: The KDC-X797's
front-panel USB port acts as an iPod/iPhone high-speed direct connection when
used with the optional Kenwood USB Direct Connection Cable (113KCIP102,
sold separately) or the USB/iPod cable that comes with your iPod/iPhone. If you
have an iPod nano (7th gen), iPod touch (5th gen), or iPhone 5; use the
Lighting-to-USB cable that came with your Apple device to connect to the head
unit. Using either cable allows audio playback, music navigation, information
display, and charging of select iPod/iPhone models from the KDC-X797.
- DAC Bypass: This USB
connection allows your iPod/iPhone's large music libraries to be loaded
instantly to the head unit and sound quality to be maximized through the
head unit's 24-bit D/A converter, allowing for a Signal to Noise ratio up to
110dB. The Kenwood head unit supports audio playback of music files and podcasts
stored on your iPod or iPhone, as well as music apps streamed to your iPhone.
- Music Control: You can choose
to control the iPod/iPhone from the head unit or from your iPod/iPhone's
clickwheel or touchscreen.
- Head Unit: The Kenwood head unit allows you to navigate
your iPod's music by Playlist, Artists, Album, Genre, Composer, Song, or
Podcast. You can search these categories alphabetically or using a
percentage search (0.5%, 1%, 5%, 10%). The head unit also supports Repeat
(file) & Random (folder) playback functions of your connected iPod/iPhone.
- iPod/App Mode: In iPod/App mode, you can navigate the
stored music on your iPod/iPhone from its clickwheel or touchscreen. You can
also listen to your favorite music apps (such as
SiriusXM,
Last.fm,
Rhapsody, &
Slacker)
from your iPhone (iOS 3.0+)
through the Kenwood head unit and your vehicle's speakers. You will continue
to use your iPhone's touchscreen to navigate your apps. Not all apps will be
compatible with App Mode. Access to your iPhone's downloaded applications
will depend on the availability of a cellular and/or WiFi network for
purposes of allowing your iPhone to connect to the Internet.
- Information Display: The KDC-X797
will display your iPod/iPhone's music file information when you are
controlling your iPod or iPhone from the Kenwood head unit. The head unit will
display Track number, Elapsed playing time, Artist name, Song title, and Album
label. If you choose to
operate your connected iPod/iPhone via its clickwheel or touchscreen controls,
the KDC-X797 will not display your iPod/iPhone's music information (the head unit will
instead display "APP/iPod").
- Battery Charging: The head unit's USB connection provides 1A of
current to power and charge your connected iPod/iPhone when your vehicle's
ignition switch is set to the 'ACC' or 'On' position. This unit does not charge
the iPad. If your iPod/iPhone has no initial battery charge,
then the unit will not recognize it.
iPod/iPhone Compatibility Chart:
The Kenwood Excelon KDC-X797 is "Made for iPod/iPhone" compatible and supports the
following iPod/iPhone model features (as of 3/14/2013):
|
Apple Device |
Generation |
Tested Version |
Media Type |
Control Type |
Specific Apps |
Display Type |
Bluetooth |
iTunes Tagging |
Charge |
|
Audio |
Video |
Head Unit |
iPod/App |
Pandora app |
iHeart Link |
Aha Radio |
Artist/Song Text |
Track Info |
Phone |
Audio |
Siri |
|
iPhone |
2G |
3.1.3 |
Y |
N |
Y |
Y |
Y |
N |
N |
Y |
Y |
Y |
N |
N |
Y |
Y |
|
3G |
4.2.1 |
Y |
N |
Y |
Y |
Y |
N |
N |
Y |
Y |
Y |
Y |
N |
Y |
Y |
|
3GS |
5.1.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
Y |
|
4 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
Y |
|
4S |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
5 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
touch |
1st |
2.2.1 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
2nd |
4.2.1 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
Y |
N |
Y |
Y |
|
3rd |
5.1.1 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
Y |
N |
Y |
Y |
|
4th |
6.1.2 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
Y |
N |
Y |
Y |
|
5th |
6.1.2 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
Y |
N |
Y |
Y |
|
nano |
1st |
1.3.1 |
Y |
N |
Y |
N |
N |
N |
N |
Y |
Y |
N |
N |
N |
N |
Y |
|
2nd |
1.1.3 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
N |
Y |
|
3rd |
1.1.3 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
4th |
1.0.4 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
5th |
1.0.2 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
6th |
1.2 PC |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
7th |
1.02 PC |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
Y |
N |
Y |
Y |
|
classic |
80GB |
1.1.2 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
120GB |
2.0.1 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
160GB |
2.0.4 |
Y |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
N |
N |
N |
Y |
Y |
|
video |
5th |
1.3 |
Y |
N |
Y |
N |
N |
N |
N |
Y |
Y |
N |
N |
N |
N |
Y |
|
iPad |
1 |
5.1.1 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
Y |
N |
|
2 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
Y |
N |
|
3 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
N |
Y |
N |
|
4 |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
Y |
Y |
N |
|
mini |
6.1.2 |
Y |
N |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
N |
Y |
Y |
Y |
N |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you may
need to reset the head unit and your iPod/iPhone to regain functionality. If
this doesn't work, you may need to wait until a newer software update is
available.
Music Control for Android Smartphone: The Kenwood Music
Control app for Android organizes your Android smartphone's music, while
providing quick and easy search capability from the Kenwood CD receiver. The
free
Kenwood Music Control App for Android can be downloaded onto your Android
smartphone from the Google Play App Store. Your Android smartphone must be
running Android OS 2.2 or later. Once the app is downloaded and has a chance to
organize all the stored music on your Android smartphone, you can connect your
Android smartphone to the Kenwood CD receiver via USB (your compatible Android
smartphone must be recognized as a USB mass storage class device; not
compatible with MTP protocol). The Kenwood Music Control app offers the
following Android supported functions.
- Song Management: Music stored in your Android
smartphone can be navigated from the Kenwood CD receiver. Songs can be
easily selected by searching for a Song title, Artist name, Album label, or
Genre.
- Song Information Display: Song information such as
Artist name, Song title, and Album label are displayed on the connected
Kenwood CD receiver.
- Mood Playlist: Playlists can be created by classifying
songs into categories by type of mood. Songs are analyzed and classified
into the following categories of moods - High Energy (Active/Powerful/Core),
Acoustic (Detailed/Simple/Smooth/Easy), Standard (Dynamic/Rockin/Vivid),
Stylistic (Cool/Urban/Trance)
- Intro Skip: This function allows you to choose and
listen to only the hook-lines of songs stored in your Android smartphone.
Note: When the Kenwood Music Control app is first
downloaded it will require some time to populate all the music, so we
suggest doing this overnight.
Music Files Format Supported by Music Control app for Android:
| Codec |
Extension |
Bit Rate |
Sampling Frequency |
| AAC |
.aac, m4a |
up to 160 kbps |
8-48 kHz |
| MP3 |
.mp3 |
8-320 kbps |
n/a |
| PCM/WAV |
.wav |
8-/16-bit |
n/a |
Aux In: The unit is equipped with a front panel 3.5mm
minijack auxiliary input that can be used to input audio from a portable audio
source, such as a portable MP3 player. The Aux input must be turned on to function. The KDC-X797 allows you to select the
source type displayed when using the auxiliary input. You can choose from AUX,
DVD, Portable, Game, Video, or TV. The
unit has 3 auxiliary input modes.
- On1: Outputs the sound of the external unit connected
to the Aux terminal when switched to the Aux source.
- On2: Activates the attenuator function when turning on
the power with the auxiliary source selected. This prevents the noise when
no external unit is connected to the Aux terminal. Turn off the attenuator
function when listening to output from an external unit.
- Off: Disables the selection of the Aux source.
Disc & USB Playback
Disc Compatibility: The unit features a single disc player
that will playback CD-Audio, CD-Text, and finalized CD-R/CD-RW audio discs. The
unit also supports playback of MP3/WMA/AAC music files loaded onto CD-R/RW
discs. The CD slot is hidden behind a manual fold-up cover which blends in the
front-panel of the head unit. .
Front-Panel USB Port: The Kenwood Excelon KDC-X797 features a
front panel USB (type-A) port that is hidden behind a flip-up cover. The USB
port enables connection of a portable USB mass-storage class (MSC) device; such
as your Android smartphone, portable digital audio player, or USB thumbdrive.
The USB port supports audio playback and control of MP3, WMA, & WAV audio files
stored on these portable USB mass-storage class devices. USB portable audio
players that can be charged via USB will be charged when plugged into the CD
receiver's USB port (max. 1A), and the vehicle's ignition switch is set to ACC
or On. You cannot connect a USB device via a USB hub or Multi-Card Reader to
this unit.
MP3/WMA/AAC Playback: The Kenwood Excelon KDC-X797 supports the
following types of MP3, WMA, AAC, & WAV files recorded onto CD-R/RW disc or
loaded onto a USB mass storage class device.
|
Media Type |
CD-R/RW |
USB Storage Device |
|
File System |
ISO9660
Level 1/Level 2, Joliet, Romeo, Long file name |
FAT
12/16/32 |
|
Playable File Types |
MP3:
bit rate of 8-320 kbps w/ sampling rate of 8-48 kHz
WMA: bit rate of 32-192 kbps w/ sampling rate of
8-48 kHz
AAC: bit rate of 8-320 kbps w/ sampling rate of 8-48 kHz |
MP3:
bit rate of 8-320 kbps w/ sampling rate of 8-48 kHz
WMA: bit rate of 32-192 kbps w/ sampling rate of
8-48 kHz
AAC: bit rate of 8-320 kbps w/ sampling rate of 8-48 kHz
WAV: bit rate of 16-bit w/ sampling rate of 44.1
kHz |
|
Maximum # of Folders/Files |
500 folders/500 files
(500 files per folder) |
999 folders/20,480
(999 files per folder) |
|
Tags |
ID3 tags
(ver.1.0/1.1/2.2/2.3/2.4), WMA tags, AAC tags |
Text Scroll: The KDC-X797 will display CD text or Audio
file text. You can set the text scrolling feature to three different modes
(Auto, Once, or Off) to scroll longer titles across the screen.
Music Search: The Kenwood AM/FM CD receiver features a Music
Search feature which allows you to scroll through and select your MP3/WMA/AAC
music folders and files, as well as scroll through your audio CD's music tracks
using the head unit's rotary knob.
Direct Music Search: The supplied IR wireless remote control
(RC-406) allows you to search for music directly by entering the track number.
Playback Modes: The Kenwood Excelon KDC-X797 features the
following Repeat, Random, and Scan playback modes.
- Repeat Play: Track, File, or Folder
- Random Play: Disc or Folder
- Scan Play: Track or File (plays the first 10-seconds of
each music track on a disc or music file in a folder)
Last Position Memory: If the unit is shut off or switched to
the tuner mode while a CD is playing, the next time CD is selected as the
source, playback will resume from the point where it left off.
CD Read: This function sets the method for reading a CD
disc. You can choose between two modes.
- CD1: Automatically distinguishes between audio file
disc and music CD when playing a CD or CD-R/RW disc.
- CD2: When unable to play a special formatted CD, set
this function to CD2 to force playing. Some music CD discs may be
unplayable even when set to this mode.
Off Insert/Eject: A CD disc can be inserted or ejected with
the power off. When a disc is inserted with the power off, the unit will
automatically power up and begin playback.
Auto Reload: If the ejected disc is not removed within 15
seconds, the disc is automatically inserted again into the loading slot to
protect it from dust.
Music Editor Compatible: The Kenwood Excelon KDC-X797 supports the
PC application, Kenwood Music Editor Lite (ver.1.1.0). Kenwood Music Editor Lite
is a Windows-based desktop software that helps organize, manage and transfer
MP3/WMA/AAC music files to your USB (MSC) device from your PC. When you playback
audio files that have been stored on your USB (MSC) device using Kenwood Music
Editor Lite through this unit, you can search a file by title, album, or artist
name using the head unit's Music Search function. The Kenwood Music Editor Light
(ver.1.1.0) Windows-based software can be downloaded for free from
Kenwood.com to your PC. The Kenwood Music Editor Light is compatible with
the following Windows Microsoft Operating Systems.
- Windows XP Professional, Home Edition SP2 or later (32-bit)
- Windows Vista (32/64-bit)
- Windows 7 (32/64-bit)
Note: Not compatible with Apple iPod/iPhone/iPad, Zune, or
Android
Display Features
Detachable Face: The Kenwood KDC-X797 features a hidden CD
slot behind a manual fold-down cover which blends in the front-panel of the head
unit. The KDC-X797 also features a detachable face to deter theft (cloth pouch
for storing the face-plate included). An optional soft face case (142DFC1X,
sold separately) can also be purchased for this unit. A face-fixing screw is
supplied for making the face non-detachable, if desired.
Fluorescent Display: The Kenwood head unit features a
single-line, 11-character, bluish-white backlit fluorescent display.
Variable Color Button Illumination: The Kenwood Excelon KDC-X797
features variable color button illumination. You can choose from one of 24
preset colors, have the unit scan through all 24 preset colors continuously, or
customize your own color (RGB; 0-9). The custom setting allows you to
individually adjust the intensity of Red, Green, and Blue (from 0-9) to better
match your vehicle's interior lights. The Kenwood logo and eject button remain
red.
Illumination Dimmer: You can manually dim the LCD and button
illumination to better suit the time of day. The Kenwood logo and eject button
do not dim.
Display Illumination/Clock Display: When the unit is in
Standby mode, the face and button illumination is "keyed." When the Clock
Display is turned on and the unit is in Standby mode, the Clock Display is also
"keyed." Pressing and holding the source button turns the unit off completely.
Demo Mode: This unit features a Demo mode which can be
turned On or Off within the menu.
Remote Control
Wireless Remote Control: The KDC-X797 comes with an IR
remote control (RC-406) for wireless operation of the head unit. The remote will
control Audio, CD, USB, and Tuner functions. It is powered by a single CR2025 3V
lithium-cell battery (supplied).
- Numeric Keypad: The wireless remote control features a
numeric keypad (0-9) which allows direct track access of your music tracks &
files (from CD or USB), as well as AM/FM presets.
- Attenuator: The CD receiver features an Attenuator button on
the supplied remote control that turns the volume down very quickly with one
touch of the button.
Steering Wheel Remote Compatibility: The head unit features
an OEM steering wheel remote control input wire (blue/yellow) within the
included wiring harness that lets you keep your vehicle's factory radio steering
wheel remote controls when used with an optional
steering wheel audio control adapter (sold separately). Please consult
Crutchfield's
Outfit My Car to see if your vehicle is compatible.
