Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Tweeters
Filters
Manual Correction

Tweeters

Tweeter Material: Each tweeter features a 1" edge-driven textile dome for smooth, accurate highs.

Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:

• I-Mount Tweeter Mounting System: The tweeters can be surface- or flush-mounted with Infinity's innovative I-Mount system:
  • Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
  • Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount adapter and plastic locking nut. Once a cutout is made, the flush-mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
• Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
  • Surface Mount (behind grille panel): Once the Starfish bracket is trimmed, it is screwed to the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
  • Flush Mount (behind grille panel): Once the Starfish bracket is trimmed, it is dropped into the cutout in the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
  • Bottom Mount (to grille panel): Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
  • Flush Mount (in-dash location): Once the Starfish bracket is trimmed, it is dropped into the cutout in the dash. Then, the tweeter is inserted into the bracket and locked into place.

Tweeter Mounting Dimensions:

Filters

In-line Filters: Each in-line filter features a 2.5 kHz high-pass filter for the tweeter.

Filter Connections: Each filter has 23" input leads and 33" output leads. The output leads are terminated with female quick-slides and the input leads have bare wire.

Filter Dimensions: L = 2.977", W = 1.045", H = 0.893"

Manual Correction

Frequency Response: The manual incorrectly lists the frequency response as 2.5 - 51 kHz. The correct frequency response is 2.5 - 21 kHz.