Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The Kicker 10DC122 Dual Subwoofer Enclosure combines two 12" Kicker Competition subwoofers with a computer-modeled and human fine-tuned vented enclosure to offer a high-level of bass performance. The Kicker Dual Subwoofer Enclosure is designed for use in SUV and sedan type vehicles.

Vented Enclosure: The vented enclosure has been computer modeled and human fine-tuned for perfectly matched bass performance. The vented enclosure features a 6.75" side firing port. At some frequencies most of the bass is output from the vent, so it needs at least 4" of clearance to ensure adequate air flow. The vented enclosure uses spring loaded, nickel-plated terminals which provide solid connection for speaker wire up to 8 gauge. Single banana plugs and pin connectors will also fit. The terminals are on the left side of the enclosure, beside the port. The vented enclosure's outer exterior is lined with rich, thick carpeting in charcoal gray and a carbon-fiberl front baffle. The vented enclosure comes supplied with four mounting brackets and the necessary hardware to secure the subwoofer box in your vehicle.

Dual 12" Comp Woofers: The Kicker 10DC122 Dual Subwoofer Vented Enclosure features two pre-loaded Kicker Competition 12-inch, 4-ohm subwoofers (10C124) wired in parallel for a 2-ohm load at the enclosure's speaker terminal.

• Polypropylene Cone: The Kicker Comp subwoofer's super-rigid injection-molded polypropylene cone features 360-degree back bracing to completely eliminate flex and distortion.
• Ribbed Foam Surround: The optimized ribbed foam surround allows extended cone excursion for additional bass output and higher SPL. The surround is double-stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.
• Spiralead Tinsel Leads: The Kicker Comp subwoofer features durable Spiralead tinsel leads, which are woven into the woofer's progressive-roll polycotton spider, for added strength and reliability.
• Steel Basket with Vented Pole Piece: The Kicker Comp subwoofer features a resilient, steel basket with coil-cooling perimeter venting and a vented pole piece for heat dissipation, so the high-temperature voice coil stays cool.