Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Installation Notes
Features
Product Overview:
Q-Logic C-Series Q-Form custom kick panels are designed to hold a 2-way component speaker
system consisting of a woofer up to 6-1/2"
and a tweeter (up to 2" diameter). They are fabricated of durable ABS plastic,
color matched to the factory interior colors, and directly replace the factory
kick panels. The positioning and angle of the speakers provide optimum stereo
imaging and staging.
No Grilles: Because no grilles
are included with the Q-Forms, you must use the grilles
supplied with the component system. In some cases, the grille could slightly
overlap the mounting surface for the woofer. In this case the cutout can be made
so any overlap occurs at the back bottom edge where it will not be visible. Note: One of the included
installation guides states that 2 Q-grilles are included. That is not the case
for the C-series Q-Forms.
Compatibility: These Q-Forms
are designed to fit select 1978-1988 Buick Regal and Grand National, Chevrolet
El Camino and Monte Carlo, GMC Caballero, Oldsmobile Cutlass, and Pontiac Grand
Prix.
Note: For each specific vehicle, please verify compatibility with the
Crutchfield Car Selector.
Factory Colors: These kick panels match the factory
Black interior trim. The Q-Forms are also available in Dark Red, Dark Blue, and
Medium Dark Gray.
Installation Notes
Installation Overview: You will
need to cut out the mounting holes in the designated areas of the plastic
Q-Form. A
roll of foam tape is provided for sealing the woofer in the kick panel. The
tweeter can be flush or surface mounted. Giving exact mounting depths is not
possible, since it will depend to some extent on the space available behind the
factory kick panel.
Modifications: Installing this
Q-Form requires two modifications to the vehicle. You will need to use two
crescent wrenches and bend the brake pedal arm so that the pedal pad is
relocated approximately 1.5" to the right. If your vehicle is equipped with an
engine computer in the passenger side kick panel, you will need to relocate it
under the passenger floor board carpet using the plastic housing provided.
