Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: This inCarBite Ai-101S headrest mount kit is available as an accessory for the M2-20-2 (item number 139M2202), so the M2-20-2's iMount case can be easily mounted in a second car (the iMount case is included with the M2-20-2, not with this item).

Quick-Go-3 Headrest Mount: The Quick-Go-3 headrest mount can be easily installed to either the driver or passenger seat headrest of your vehicle. Its two-piece design clamps around both metal posts of the headrest and tightens using two threaded knobs. The headrest post spacing must be between 2.875" (minimum distance between posts) and 7.864" (maximum width, including the posts). The diameter of the posts must be at least 0.35 inches. The Quick-Go-3 headrest mount features a rugged ABS plastic exterior (black) with steel frame internal bracing, so your iPad 2 will not shake while your vehicle is moving.

Note: Adjust the headrest position before installing the Quick-Go-3 headrest mount.

iPad Mounting: Once the headrest mount (this item) is mounted, the iMount case included with the M2-20-2 snaps into the slot on the front of the mount.

12-Volt Power Adapter: A 12-volt power adapter is included to power and charge your connected iPad 2's internal battery. The adapter plugs into a cigarette lighter port on one end and into the headrest mount on the other.

Dimensions:

• Headrest Mount: 9.4375" (w) x 1.0" (h) x 3.0" (d)
• 12V Power Adapter Cord Length: 6.5'