At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofers
Tweeters
Crossovers
Woofers
Plus One+ Woofer Cones:
Each speaker uses a cone significantly larger than other speakers of the same
size. This is accomplished by using a new basket design and hi-roll surround.
The Plus One+ design offers greater bass output and a significant increase in
efficiency.
Woofer
Materials:
Each woofer is constructed from Injection-Molded Polypropylene.
This process of cone molding assures a uniform cone thickness for superior
linearity and clarity. It is also lighter weight and more rigid for decreased
distortion and improved bass response.
Hi-roll Rubber
Surrounds: The hi-roll rubber
surrounds allow the woofers a greater range of movement, resulting in longer
X-max and more bass output.
Intermount
III:
Infinity's Intermount III mounting system allows the 6010cs woofers to fit
in 6-1/2" and 6-3/4" applications. A metal adapter ring is included with each
woofer.
Tweeters
Tweeter
Material:
Each tweeter features a 1" edge-driven silk dome for smooth, accurate
highs.
Tweeter Mounting:
The I-Mount tweeter mounting system and Starfish mounting brackets give you
several different ways to mount the tweeters:
- I-Mount Tweeter Mounting
System: The
tweeters can be surface- or flush-mounted with Infinity's innovative I-Mount
system:
- Surface Mount:
Surface mounting the tweeters involves screwing the surface-mount cup to
the mounting location, then inserting and locking the tweeter into the
cup.
- Flush
Mount: Flush mounting is made easy through the use of the threaded
flush-mount adapter and plastic locking nut. Once a cutout is made, the
flush-mount adapter (with the tweeter installed) is inserted into the
hole. The large plastic locking nut is threaded onto the adapter (from
behind the mounting surface) to hold the complete assembly securely in
place. When flush mounted, the tweeters may be angled for optimum
response and imaging.
- Starfish Mounting
Brackets: The Starfish mounting
brackets allow the tweeters to be installed in factory locations behind the
grilles:
- Surface Mount
(behind grille panel): Once the
Starfish bracket is trimmed, it is screwed to the mounting surface
behind the grille panel. Then, the tweeter is
inserted into the bracket and
locked into place.
- Flush Mount (behind
grille panel): Once the
Starfish bracket is trimmed, it is dropped into the cutout in the
mounting surface behind the grille panel. Then, the tweeter is
inserted into the bracket
and locked into place.
- Bottom Mount (to
grille panel): Once the
Starfish bracket is trimmed, it is secured to the underside of the
grille panel. The tweeter must be
inserted into the bracket and
locked into place before the bracket is mounted.
- Flush Mount (in-dash
location): Once the Starfish
bracket is trimmed, it is dropped into the cutout in the dash. Then, the
tweeter is inserted
into the bracket and locked into place.
Tweeter
Mounting Dimensions:
|
|
I-Mount
Surface Mount |
I-Mount Flush
Mount |
Starfish Surface Mount (behind grille
panel) |
Starfish Flush Mount (behind grille
panel) |
Starfish Bottom Mount (to grille
panel) |
Starfish Flush Mount (in-dash
location) |
|
Mounting
Height |
0.957" |
0.646" |
0.934" |
0.496" |
N/A |
0.066" |
|
Depth |
0.517" (screw
depth) |
0.875" |
0.479" |
0.438" |
1.009" |
0.913" |
|
Frame
Diameter |
1.646" |
2.005" |
2.385" |
2.621" |
2.898" |
2.951" |
|
Cutout Diameter |
N/A |
1.751" |
N/A |
1.782" |
N/A |
2.658" |
Crossovers
2-Way Crossovers:
These speakers include computer-optimized, voice-matched crossovers. Each
crossover features an 18dB/octave, 3.5kHz high-pass network for the tweeter and
an 18dB/octave, 3.5kHz low-pass network for the woofer.
Selectable
Tweeter Output Level:
Each crossover allows you to select the tweeter output level according to system
requirements and personal preference. The tweeter level may be set to "-3 dB" or
"0 dB."
Crossover Connections:
The crossover inputs and outputs are gold-plated screw terminals.
Mounting: There are two
mounting holes in the base of each crossover.
Crossover Dimensions: W=3.174",
H=1.393", D=4.315"
