Pre-build box for Artison RCC-600-SM in-wall subwoofer
Share this product:
Our take on the Artison RCC-600-IWPBB
This box was designed to match the Artison RCC-600-SM in-wall subwoofer. It installs easily into a stud bay while a home is in the early stages of construction or renovation. Install it before the drywall goes up to mark the sub's location for your builder, and you won't need to cut holes later.
You can also use this enclosure for retrofitting your Artison in-wall subwoofer. It ensures accurate, consistent bass regardless of what's behind your wall.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Artison In-Wall Pre-Build Box
(RCC600-IWPBB) is designed to provide the minimum air volume requirement in a
sealed and braced enclosure for the Artison RCC600-SM in-wall subwoofer module.
The Artison pre-build box installs easily in the early stages of home
construction and allows an easy installation of the RCC-600-SM in-wall subwoofer
module in the later trim-in phase of the installation. This pre-build box is
also designed to be easily retrofitted into existing standard home construction.
Enclosure: The RCC600-IWPBB provides an acoustic suspension enclosure
for your RCC600-SM in-wall subwoofer module. The enclosure features a white
satin finish which can be painted to match your decor.
Mounting: The RCC600 In-Wall Pre-Build Box is designed to fit into the
bay of a stud wall that is constructed of 2" x 4" studs spaced at 16" on-center.
A deeper all may be used but the stud spacing should still be 16" on center. The
front-face of the RCC600-IWPBB is designed to mount flush with the finished
drywall surface. The in-wall pre-build box has two integrated mounted flanges
with pre-drilled mounting holds that run along the two longer edges of the
enclosure. These secure the RCC600-IWPBB to the two studs that make up the stud
bay. When mounting the RCC600-IWPBB fasten 1-1/2" drywall screws (not supplied)
through the pre-drilled holes in the mounting flanges to the two studs on each
side of the bay. This will ensure a safe and secure installation. The front
edges of the RCC600-IWPBB are chamfered to allow mudding, taping ,and sanding of
all four edges flush with the drywall. The drywall thickness is critical to the
mounting of the in-wall pre-build box.
- If the construction calls for 1/2" drywall, then the RCC600-IWPBB should
be mounted directly to the studs. After the drywall is hung, the edges of
the in-wall pre-build box should be taped, mudded, and sanded flush with the
- If the construction calls for 5/8" drywall, the use the two 3mm wood
spacers supplied to fur the in-wall pre-build box out from the stud wall.
After the drywall is hung, the edges of the RCC600-IWPBB should be taped,
mudded, and sanded flush with the drywall.
Connections: The RCC600-IWPBB features a pair of gold-plated
spring-post terminals on the top of the enclosure to attach your in-wall speaker
wire. Inside the box is 14AWG speaker wire leads (positive/negative) with
bare-tinned wire to connect your RCC600-SM in-wall subwoofer module.
Review this product:
Thanks for taking the time to share your experiences about this product. Please
be sure to focus your comments on the product itself. Read our
Review Guidelines for more information.
For a more in-depth review and enhanced detailed information on the
Artison RCC-600-IWPBB, please visit the Crutchfield website product
Get live, personalized service from an expert
Crutchfield Advisor: Hi there.
We're happy to answer questions or provide additional info about this item.
Advisors also available at 1-888-600-3963