Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofer
Tweeter
Crossover
Dimensions
Woofer
Polyglass Cone: The woofer cone has a cellulose pulp base
and is coated with a uniform deposit of hollow glass microballs. The addition of
the Polyglass layer significantly increases the cone's rigidity without adding
much weight. This combination takes advantage of the accuracy and neutrality of
the hard outer surface, but maintains the superior damping characteristics of
the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet
rays, temperature extremes, and humidity to add to the speaker's reliability and
longevity.
Voice Coil: The 1" diameter voice coil is wound around a
low-mass Kapton former, ensuring no coil deformation.
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted
aluminum/magnesium dome, producing a broad sound stage. The tweeter has
a Neodymium magnet to provide a powerful magnetic field for the voice
coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted
using the included adapters. Focal recommends flush mounting, but the included
angled cup allows surface mounting at one of two angles; approximately 10° and
approximately 30°.
Crossover
Components: Focal uses audiophile grade polypropylene capacitors
and air core inductors to ensure high definition and a dynamic sound quality.
Tweeter Level: You can adjust the output level of the tweeter
on the crossover to 0 dB or -3 dB.
Crossover Slope: The crossover points and slopes are switchable;
choose 6 dB/octave low-pass and 12 dB/octave high-pass at 3,700 Hz or 12 dB/octave
low-pass and 18 dB/octave high-pass at 5,000 Hz.
Wiring: The inputs and outputs are screw terminals; they will
accept bare wire or spade connectors up to 0.3" wide.
Dimensions
Tweeters:
| |
Flush Mount |
10° Angled Surface Mount |
30° Angled Surface Mount |
| Mounting Height |
0.285" |
1.213" |
1.574" |
| Mounting Depth |
0.771" (0.981" including screw) |
0.53" (screw depth) |
0.53" (screw depth) |
| Frame
Diameter |
2.053" |
N/A |
N/A |
| Cutout
Diameter |
1.833" |
N/A |
N/A |
| Width |
N/A |
1.793" |
1.793" |
| Surface Depth |
N/A |
1.833" |
1.769" |
Crossover:
- Width: 2.546"
- Height: 1.260"
- Depth: 4.715"
