About the Kenwood KGC-6042A
Give your car stereo that final tweak with the Kenwood KGC-6042A. You'll enjoy tone control precise enough to coax noticeably improved sound from even a high-end system.
Command 9 normal bands plus two with variable center frequencies (30-800 Hz and 800-16k Hz) with the KGC-6042A. These parametric (variable) bands really let you zero in within a given frequency range. So it's a snap to dial up your favorite lead guitar sound, from smooth, violin-like sustain to a percussive snap and twang.
Get a front-to-rear fader for dual-amp balancing and for adjusting the rear-fill, even with a head unit that has only one pair of pre-outs. The low-pass "sub-out" set of pre-amp outputs includes level control. And the KGC-6042A engages high-pass crossovers on the front and rear channels whenever this subwoofer output is in use.
Important Note: This unit has no built-in amplifier must be used in conjunction with one or more external amplifiers.
Details:- two sets of full-range outputs with high-pass filter that engages when subwoofer output is in use.
- subwoofer output has adjustable level control (up to +10 dB).
- adjustable subwoofer crossover range (30-150 Hz)
- dual illumination.
- signal-to-noise ratio 100 dB
- THD 0.01%
- 7"W x 1"H x 7-1/2"D
- warranty: 1 year
What's in the box:
Kenwood KGC-6042A owner's manual
- EQ
- Power harness w/ noise suppressor and 3-amp fuse
- Trim plate (W=7.375 H=1.188 D=0.375)
- Mounting brackets
- Hardware
- Manual
- Warranty information
Customer reviews for Kenwood KGC-6042A
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KGC-6042A
Product Research
Features
Illumination:
- GRN/ORG: Switch changes the color of the rings around the fader and EQ and SUB knobs only from green to amber.
- Slide Controls: Are always amber.
- Subwoofer Controls: Are always green.
Note: The switch for changing illumination color is on the right side of the chassis, so the illumination cannot be changed while the EQ is recessed into a housing or your vehicle's dash cavity.
Outputs: This unit is equipped with front, rear and subwoofer RCA outputs. The subwoofer outputs are non-fading outputs.
High-Pass Crossover: when the unit is used in the "9 band + 2 band" mode and the subwoofer outputs are used, the rear RCA outputs will be high-pass filtered at 100Hz. When the unit is used in the "11 band" mode and the subwoofer outputs are used, the front and rear RCA outputs will be high-pass filtered at 100Hz.
Subwoofer Crossover:
- Variable between 30 and 150Hz
- Slope is 12 dB/octave
Sub-Level Control: Variable between -Infinity and +10 dB.
Parametric EQ: Has two frequency adjustment controls (30-800Hz and 800-16kHz) and two +/- 12dB level controls for them.
Set Up Options: Front and rear outputs can be adjusted with all 11 frequency controls ("11 band" mode) or the front controlled by the parametric controls and rear by the other 9 ("9 band + 2 band mode).
"On" Buttons: The parametric EQ and 9-band EQ sections have separate turn-on buttons.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...