Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Full-Motion Design: The Sanus Premium Series VMF518 full-motion,
wall-mount bracket provides a 4-points of movement for an optimal viewing
position. The VMF518 extends from the wall (3.25"-18.75"), tilts
up/down (+/-12°), and swivels left or right (+/-55°)
for easy viewing anywhere in the room. The bracket can also be rotated 90°
to the left or right for landscape or portrait viewing.
TV Capacity: The Sanus Premium Series VMF518 wall-mount bracket is
designed to support flat-panel TVs from 40" to 50", weighing up to 75 lbs.
VESA Bolt Pattern: The VMF518 full-motion, wall-mount bracket
accommodates a horizontal hole spacing on back of the TV of 200mm-400mm and a
vertical hole spacing of 200mm-400mm. The Sanus VMF518 comes with M4, M5, M6,
and M8 size bolts of differing lengths to mount the bracket to your TV. It will
accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- 200mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Note: The wall plate must be mounted to a wall stud or
anchored to a brick, block, or concrete wall using the supplied lag bolts
Construction: The bracket is constructed of heavy-gauge
steel and high-impact plastic with a durable powder-coated black finish.
Cable Management: An in-arm cable management channel
protects and conceals cables the length of the arm for a clean appearance, while
a decorative cover conceals assembly and mounting hardware of the wall-plate for
a finished appearance.
Safety Tab: A safety tab provides a safe and easy connection you can
Installation Tools: The following tools are recommended for
mounting the VMF518:
- Tape measure
- Stud finder/level (included)
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Horizontal TV Brackets:
- Width = 17.25"
- Height = 2.3125"
- Depth = 1.0"
- Vertical TV Bracket:
- Width = 2.6875"
- Height = 19.0625"
- Depth = 1.125"
- Arm Assembly/Wall Plate:
- Width = 2.875" (wall plate)
- Height = 8.25" (wall plate)
- Depth = 3.25"-18.75" (arm extension)