About the Boyo VTL400 Rear-view Camera
The Boyo VTL400 rear-view camera adds safety, convenience, and a sleek look to your vehicle. The camera bolts to your license plate mounts for a neat installation.
Connect the VTL400 to your in-dash monitor, and it automatically displays what's behind your vehicle when you put your car or truck in reverse. The camera swivels up and down, so you can choose the best line of sight for your vehicle. And you'll get a great peripheral view with the camera's 130-degree lens. Warranty: 1 year.
What's in the box:
Boyo VTL400 Rear-view Camera owner's manual
- Chrome zinc alloy bar-type rear-view camera with attached 26" video/power/ground cable
- 16.5' Video/power/ground cable with a male 4-pin connector on one end and a female 3-pin connector on other end
- 14" Video/power/ground adapter cable with a female 4-pin connector on one end and a composite video connector and bare power/ground leads on other end
- Test light with two 30" wires connected to a black alligator clip and a red test probe
- 2 Hex-head bolts
- 2 Lock-washers
- 2 Flat-washer
- 2 nuts
- 2" Heat-shrink tubing
- Installation Instructions sheets
- Limited One Year Warranty card
- Product Registration card
Customer reviews for Boyo VTL400 Rear-view Camera
Loading...
Loading reviews...
Average review:
2.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Boyo VTL400 Rear-view Camera
Product Research
Features
Overview: The BOYO Vision VTL400 Bar-Type Rear view Camera is designed to attach to your vehicle's existing license plate frame.
Zinc Alloy Housing: The VTL400's bar-type bracket is made from zinc alloy and covered in a chrome finish with a scratch-resistant coating. The camera's waterproof (IP67) housing is made from the same long-lasting, durable material. The rear view camera can be angled up and down within the bar-type bracket.
Rear View Camera: The VTL400's rear view camera features a highly sensitive 1/3" DSP color CCD with approximately 297,984 effective pixels (512 horizontal x 582 vertical) for true color reproduction and clear picture quality. The camera features a wide-angle lens with a 130-degree vertical and horizontal viewing angle providing an excellent field of vision behind you in your vehicle.
Installation: The VTL400 attaches to your vehicle's existing license plate frame with the supplied hardware. The integrated rear view camera features an attached 26" video/power/ground cable which connects to the supplied 16.5' video/power/ground extension cable. The extension cable is then routed from outside of the vehicle through your vehicle's interior to your vehicle's display monitor. The extension cable is then plugged into the supplied 14" video/power/ground adapter. The video/power/ground adapter features a composite video RCA connector which connects to your vehicle's display monitor and a power and ground lead which need to be connected to your vehicle's 12-volt electrical system. The VTL400 comes supplied with a convenient test light to help you make the power connection.
Compatibility: The VTL400's standard composite video output (RCA plug) makes it compatible with virtually any mobile video monitor featuring a rear view camera input.
Specifications:
- Imager: 1/3" DSP Color CCD
- Effective Pixels: NTSC - 512 (H) x 582 (V)
- Horizontal Resolution: 420 TV Lines
- Total Number Of Pixels: 320k
- Minimum Illumination: 0.5 Lux at F2.0
- Scanning System: 2:1 Interlaced
- Video Output: 1Vp-p 75 ohm composite
- S/N Ratio: More than 48dB
- Electronic Iris: 1/50-1/1,000 sec.
- White Balance: Auto
- Gain Control: Auto
- Power Source: DC12V
- Operating Temperature: -4 degrees F to 122 degrees F
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...