Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Vehicle Compatibility: The Axxess XSVI-5524-NAV
replacement radio interface allows you to install an aftermarket radio in select
2011-up Ford vehicles. The XSVI-5524-NAV interface is designed to be used in vehicles without a factory amplified sound system or when
replacing the entire factory amplifier system. The XSVI-5524-NAV does not retain the
factory THX/Sony amplified sound system or Ford Sync. Compatible vehicles
include (as of 7/30/2013):
|Fusion (w/ 4.2"
|F-150 (w/ 4.2"
Explorer (w/ 4.2" screen)
Note: Please consult the
Crutchfield Car Selector to see if your vehicle and aftermarket head
unit is compatible.
12V/10A Accessory Output: In these vehicles, there is
no 12-volt accessory wire in the factory harness, which requires the installer
to run an accessory wire to the fuse box or underneath the steering column when
installing an aftermarket radio. The XSVI-6502-NAV is designed to provide a
12-volt/10-amp switched accessory output (red wire), along with an illumination
wire (orange/white wire).
Retained Accessory Power (R.A.P.): The Retained Accessory
Power (R.A.P.) function supplies power to the radio after the ignition is shut
off until one of the front doors are opened. This function is retained by the
Navigation Ready: The XSVI-5524-NAV provides essential wires
required for aftermarket radios that have navigation. VSS (Vehicle Speed Sense),
Reverse, and Parking Brake wires are provided. This helps to cut down the
installation time, since the installer does not have to look for these wires in
Color Codes: Wiring up the XSVI-5524-NAV is like wiring up
any other wire harness that would attach to an aftermarket radio's harness. The
Metra/EIA wire codes can be found in the Installation Instructions that will aid
you in the wiring of your aftermarket radio The XSVI-6502-NAV interface contains
the following wire leads.
Right Front +
||Right Front -
||Left Front +
||Left Front -
||Right Rear +
||Right Rear -
||Left Rear +
||Left Rear -