Your search for rockford fosgate car amplifier returned the following:

4-channel car amplifier — 50 watts RMS x 4

IN STOCK

• 150 watts RMS x 2 bridged
• variable high- and low-pass filters
• preamp and speaker-level inputs

Mono subwoofer amplifier — 1,000 watts RMS x 1 at 1 ohm

LOW STOCK

• 300 watts RMS x 1 at 4 ohms (600 watts x 1 at 2 ohms)
• C.L.E.A.N. gain system includes setup CD and clip lights
• 1-ohm stable

Mono subwoofer amplifier — 500 watts RMS x 1 at 1 ohm

IN STOCK

• 150 watts RMS x 1 at 4 ohms (300 watts x 1 at 2 ohms)
• C.L.E.A.N. gain system includes setup CD and clip lights
• 1-ohm stable

Full-range mono amplifier — 400 watts RMS x 1 at 2 ohms

IN STOCK

• 250 watts RMS x 1 at 4 ohms
• C.L.E.A.N. gain system includes setup CD and clip lights
• variable PEQ2 bass/treble boost

Mono amplifier — 300 watts RMS x 1 at 2 ohms

IN STOCK

• 200 watts RMS x 1 at 4 ohms
• C.L.E.A.N. gain system includes setup CD and clip lights
• variable PEQ2 bass/treble boost

Mono subwoofer amplifier — 250 watts RMS x 1 at 2 ohms

IN STOCK

1 person says 

• 150 watts RMS x 1 at 4 ohms
• variable low-pass filter and bass boost
• preamp and speaker-level inputs

Mono subwoofer amplifier — 700 watts x 1 at 1 ohm

LOW STOCK

3 people say 

• 225 watts RMS x 1 at 4 ohms (450 watts RMS x 1 at 2 ohms)
• variable low-pass filter and subsonic filter
• preamp inputs and outputs

Single passive crossover for Punch Pro components

IN STOCK

• works with 4-ohm Punch Pro midrange speakers
• works with a 4- or 8-ohm Punch Pro tweeter
• selectable tweeter level (0, -3, or -6 dB)

Single passive crossover for Punch Pro components

IN STOCK

• works with 8-ohm Punch Pro midrange speakers
• works with a 4- or 8-ohm Punch Pro tweeter
• selectable tweeter level (0, -3, or -6 dB)

Programmable 8-channel digital signal processor

IN STOCK

1 person says 

• DSP settings and adjustments made via laptop or PC through USB port
• 8 preamp outputs (up to 8 volts)
• time alignment,: frequency filters,: 31-band equalization,: and more

Single 12" subwoofer enclosure with 300-watt amp

LOW STOCK

3 people say 

• hatchback-style powered enclosure with one 12" subwoofer
• built-in Class D amplifier (300 watts RMS)
• remote bass-level control included

Single 10" subwoofer enclosure with 300-watt amp

OUT OF STOCK

5 people say 

• hatchback-style powered enclosure with one 10" subwoofer
• built-in Class D amplifier (300 watts RMS)
• remote bass-level control included

4-channel marine amplifier — 75 watts x 4 channels

IN STOCK

3 people say 

• 200 watts RMS x 2 bridged
• variable high-pass/low-pass filters
• conformal-coated circuit board

Marine mono subwoofer amplifier

IN STOCK

• 1200 watts RMS x 1 at 1 ohm
• variable low-pass filter
• conformal-coated circuit board

4-channel marine amplifier — 100 watts x 4 channels

IN STOCK

1 person says 

• 300 watts RMS x 2 bridged
• variable high-pass/low-pass filters
• conformal-coated circuit board

Marine mono subwoofer amplifier

LOW STOCK

• 750 watts RMS x 1 at 1 ohm
• variable low-pass filter
• conformal-coated circuit board

For 2013-up Punch Series amplifiers with C.L.E.A.N. setup system

IN STOCK

• wired remote level control and clip light
• 16-1/2' remote cable and mounting hardware included
• works only with 2013-up Punch amps with C.L.E.A.N.

For 2007-up Power and Punch Series amps

IN STOCK

21 people say 

• For use with 2007-up Rockford Fosgate Punch and Power Series amplifiers
• bass and treble boost
• connecting cable and mounting hardware included
  

10-gauge amplifier power and signal wiring kit

IN STOCK

28 people say 

• 10-gauge power and ground cables
• twisted pair RCA patch cable
• fuse holder w/25-amp fuse

10-gauge amplifier power wiring kit

IN STOCK

12 people say 

• 10-gauge power and ground cables
• turn-on lead
• fuse holder w/25-amp fuse