Features
Exclusive HDAM Technology: Featuring separate phono and line level
circuit boards, the PM-11S3 is equipped with Marantz's exclusive HDAM (Hyper
Dynamic Amplifier Module) technologies, which provide superior low noise wide
band performance in an all-discrete configuration, compared to conventional op
amp ICs. The PM-11S3 incorporates no less than 40 HDAM SA3 latest generation
modules, which feature ultra fast slew rate for true wideband response and
maximum dynamic range, including multiple HDAM SA3 modules in the phono stage.
Constant Current Feedback Technology: The MM/MC phono section
incorporates Marantz's latest Constant Current Feedback gain stage, which
features DC Servo equalization that eliminates the discontinuities in tonal
balance caused by conventional RIAA equalization using ordinary dual band
negative feedback topology, for the purest reproduction of your favorite vinyl
recordings. The PM-11S3 also incorporates an HDAM SA3-driven current feedback
balance buffer that faithfully transfers signals from components with quality
balanced outputs, such as super audio CD players and D/A converters.
Robust Power Supply: Rated at 100 watts per channel into 8 ohms, the
PM-11S3 features an extremely robust power supply and comparably rugged power
amplifier output stages that together provide incredible low impedance drive
capability, with a power output of 200 watts per channel into 4 ohms, easily
able to drive virtually any audiophile loudspeaker with stability and utmost
fidelity. The power supply features a massive 950 VA toroidal transformer wound
with OFC (Oxygen Free Copper) for maximum headroom and operational stability,
securely anchored to the chassis via its own solid metal sub-mounting plate
which eliminates the possibility of transformer-induced vibrations. Instead of a
conventional bridge rectifier, the PM-11S3 incorporates fast response, high
current Shottky barrier diodes, which provide faster switching and lower voltage
drop for a more pure DC output.
Versatile Connectivity: The PM-11S3 provides maximum configuration
flexibility, as it can be configured as a conventional stereo integrated
amplifier, or set up with another PM-11S3 as a dual component four channel
configuration for bi-amp operation, and it can also be paired with an A/V
surround processor/pre-amp and used as a stereo power amplifier for the main
left and right speakers in a home theater system via the Power Amp Direct
inputs. Line level inputs feature unbalanced (RCA) and fully balanced XLR
options for maximum connection flexibility.
- Floating Control Bus System: A Floating Control Bus
System (FCBS) is a two way communication system that enables you to connect
up to four PM-11S3s and control them simultaneously, This makes possible a
number of applications, including bi-amplifying and multiple channel
(surround, multi-channel SACD, etc) applications. A ground loop is not
formed between multiple connected PM-11S3s, therefore sound quality is not
adversely affected. When more than one PM-11S3 is used a different ID code
is assigned to each.
- Bi-Amp Mode: The bi-amp option offered by Marantz
reproduces a sound environment never before experienced. This same bi-amp
connection has been made possible with the PM-11S3. Two PM-11S3s are
connected by FCBS in bi-amp mode, enabling each to work as a monaural
amplifier.
- Power Amp Direct Mode: In this mode, this unit works as a power
amplifier. This mode will be useful in home theater systems
Dedicated Input Buffers: Each unbalanced RCA input (CD, Line 1, Line 2, Recorder 1,
and Recorder 2) has its own input buffer built on HDAM SA3 technology. By
providing each line with its own buffer amp, it is possible to prevent
interference between input sources and thereby faithfully transfer signals from
the input source.
A & B Speakers: The A and B speaker outputs are binding posts and will
accept single banana plugs, pin connectors, spade lugs (up to 0.575" wide),
and bare wire (up to 11 gauge).
The amplifier supports speakers ranging from 4-ohm to 16-ohm. Use speakers with
an 8-ohm impedance or above if you plan on powering A & B speakers at the same
time.
Rugged, Durable Construction: Weighing in at just under 59 pounds, the
PM-11S3 features a new chassis design with beautiful casework that includes a
new 5mm thick solid aluminum top panel for maximum chassis rigidity that allows
additional components to be stacked on top. The chassis also features a dual
layer bottom panel for additional strengthening, and all internal chassis
surfaces are copper plated for maximum resistance to RF and electrically induced
interference. Around back, the PM-11S3 is equipped with our newly designed
reference grade multi-way speaker binding posts which feature pure copper
contoured knobs for optimum connectivity with a wide variety of speaker cable
terminations.
Intuitive Control Panel + Remote Control: Supplied with a newly
designed remote control (which can also operate the matching Marantz Reference
Series SA-11S3 SACD/CD player), the PM-11S3 features an all new digitally
controlled analog volume control system, which provides the precision of tightly
defined volume adjustment over the entire range with outstanding channel
tracking (.5 dB) while keeping the audio information entirely in the analog
domain.
- Linear Control Volume: The PM-11S3 incorporates linear
control volume which improve S/N ratio, enabling smooth control in ±0.5 dB
steps across a 0 to -100 dB range.
- Tone Control: The PM-11S3 incorporates adjustable tone
control for adjusting bass (50Hz) and treble (20kHz) in 2 dB steps across a
±8 dB range. The left and right channels can be separately adjusted from the
remote control.
- Balance Levels: The volume level of the left and right channels can be
trimmed in 0.5 dB steps across a 0.0 to -9.0 dB range.
Ultra-Low Noise LCD: Equipped with our distinctive Reference Series
front panel design, the PM-11S3 features an improved contrast, ultra low noise
LCD display that provides information including volume level, channel balance,
bass and treble control levels, selected source as well as attenuation level,
which can be user-set for -20 dB, -40 dB or full mute.
