Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Overview: The BoraGear Bora Lite cooling fan is designed to provide ventilation for electronic components mounted in wooden cabinets up to 33 cubic feet. The Bora Lite is essentially a Bora model without the metal enclosure and rubber vibration isolators. The cooling fan is simply mounted to a metal plate. It still provides quiet 11dB operation, and a brisk 65 cubic feet per minute airflow. It is powered by a 12-volt power supply (included).

Installation: The Bora Lite is designed to be installed inside a cabinet, pulling air from inside the cabinet and blowing it out into the room. A 4-1/2" diameter round hole should be cut for the exhaust flange. The fan installs easily with the 4 captive mounting screws. The 12-volt power supply has a 6' cord which plugs into the 8" pigtail coming out of the fan. The fan is constantly on, but can be controlled via a switched outlet that turns on with the A/V system.

Ventilation System Guidelines: A proper ventilation system should have a proper-sized intake and an exhaust with no obstructions within 4 inches. The fan should be mounted at the back of the cabinet near the top. The intake should be on or near the bottom front of the cabinet, and should have at least 16 square inches of open space. The equipment should be between the intake and exhaust of the cabinet in order for cooling air to flow over the top of the components. The shelves need to have gaps in front and back to allow air to flow in front of and behind them.

BoraGear Accessories: For constructing the most efficient equipment cabinet, you will need the following accessories from BoraGear:

• Toe Kick Vent: This 17-1/2" x 2-5/8" vent is for the air intake. Made of durable ABS plastic, the vent comes in black or white.
• Cabinet Vent: This 5-1/2" x 4-7/8" vent is for covering the round 4-1/2" exhaust hole. This vent is also made of ABS plastic, and is available in black or white.
• Hole Saw: This heavy duty hole saw cuts a 4-1/2" diameter round hole in the cabinet for installing the Bora Lite cooling fan.
• Rack Light: The Corona rack light illuminates your equipment rack from the inside to make it easier to connect your components.