About the StreetWires Power Station PSK04BM
StreetWires Power Station amp kits provide the insulated power cables, fuses and connectors you need to install your amplifier and add an impressive, professional edge to your installation. Fine-strand, silver-plated oxygen-free wire reduces interference, so your power flows clean and pure at higher power levels.
The Power Station PSK04BM multi-amp wiring kit handles amplifier systems with a rating of up to 600 watts. Each 4-gauge power and ground cable is protected by a durable, Poly Flex jacket, and come with nickel-plate ring terminals for a secure connection to your amplifier. A 4-output distribution block, in-line fuse holder, fuse, a turn-on lead, and assorted hardware is also included.
Product highlights:
- multi-amp wiring kit with power and ground connections
- 17.75 feet of 4-gauge blue power cable
- 7.75 feet of 8-gauge blue power cable
- AFS in-line fuse holder with 100-amp AFS fuse
- 6 feet of 8-gauge silver grounding cable
- distribution block (one 4-gauge input, four 8-gauge outputs)
- 16 feet of 18-gauge blue remote turn-on wire
- assorted connectors, ring terminals, spade terminals, and wire ties
- warranty: lifetime
- MFR # PSK04BM
What's in the box:
StreetWires Power Station PSK04BM owner's manual
- One 17.75' length of 4-gauge power wire in a translucent blue jacket (has attached battery ring terminal)
- One 7.75' length of 8-gauge power wire in a translucent blue jacket (has attached battery ring terminal)
- One 6' length of 8-gauge ground wire in a clear jacket (has attached ring terminal)
- One 16' length of 18-gauge remote wire in a blue jacket
- In-line AFS fuse holder
- One 100-amp AFS fuse
- One 4- to 8-gauge distribution block (has three 4-gauge inputs and four 8-gauge outputs)
- Two 8-gauge crimp-on ring terminals (each has a black insulator boot)
- Four 8-gauge crimp-on spade terminals (two have a black insulator boot and two have a translucent blue insulator boot)
- Two 18-gauge crimp-on spade terminals (each has a translucent blue insulator boot)
- 1 Red butt connector
- Six 4.5" wire ties
- Instructions on package
Customer reviews for StreetWires Power Station PSK04BM
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the StreetWires Power Station PSK04BM
Product Research
Features
General Overview: This is a dual amplifier wiring kit that includes 4-gauge and 8-gauge power cables, an 8-gauge ground cable, a turn-on lead, a power distribution block and accessories required to install two amplifiers. Speaker wire and patch cords are sold separately.
In-line Fuse Holder: The in-line fuse holder is waterproof and comes with a 100-amp AFS fuse. The fuse holder's set screw input and output accept bare 4-gauge wire (no ring terminal required). Integrated tabs allow you to mount the fuse holder using optional self-tapping screws. The fuse holder has the following dimensions: L=3.335", W=1.887" (including integrated mounting tabs), H=0.994".
Note: The set screws require 3mm and 5/32" Allen wrenches.
Distribution Block: The distribution block has three 4-gauge inputs and four 8-gauge outputs. For flexibility during installation, one input is located on the front of the distribution block and the other two are located on the sides. When you run wire, you only need to use one of the inputs. Two holes in the distribution block's base allow you to mount it using optional self-tapping screws. The distribution block has the following dimensions: L=2.065", W=2.194", H=0.835".
Note: The set screws require 3mm and 5/32" Allen wrenches.
Power and Ground Cables: The 4- and 8-gauge power cables have translucent blue insulation jackets while the 8-gauge ground cable has a clear insulation jacket.
Remote Turn-on Wire: The 18-gauge remote turn-on wire has a blue insulation jacket.
Crimp-on Terminal Dimensions: The crimp-on terminals have the following dimensions:
- Power Ring Terminal (installed): W=0.654", Inner Diameter=0.335"
- 8-gauge Ground Ring Terminals: W=0.477", Inner Diameter=0.214"
- 8-gauge Spade Terminals: W=0.327", Prong Spacing=0.152"
- 18-gauge Spade Terminals: W=0.275", Prong Spacing=0.147"
The StreetWires Power Station PSK04BM replaces these items
StreetWires PS04B
Blue Power/Silver Ground Cable
Distribution Block
- 4-gauge power cable w/ ring terminal
- 8-gauge power cable
- 8-gauge ground cable with ring terminal
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...