Alpine MRP-M1000

Mono subwoofer amplifier
1,000 watts RMS x 1 at 2 ohms

Zoom

Front
Other

Photos
Videos

My vehicle's homepage

We don't check this item for fit or compatibility.

Item# 500MRP1000

18 people say

DISCONTINUED

This item is no longer available to purchase.

Call Email

Original price $329.99

Shop all All Car Amplifiers

We recommend this similar item, or shop all All Car Amplifiers

- Alpine MRP-M500
- 500W x 1 at 2 Ohms Car Amplifier
- - 300 watts RMS x 1 at 4 ohms
  - variable low-pass filter
  - variable bass boost
- $149.99
- After $50.00 Price Break
- Compare discontinued and similar item

By buying this product you'll earn up to 330 Rewards points.

When you sign up for a Crutchfield account, you’ll be enrolled in Crutchfield Rewards. You’ll earn one point for every dollar you spend on gear from us. You can turn your points into Rewards Cards that you can use toward future purchases. You can sign up for an account now, or after you complete your purchase (you’ll get credit for the points either way).

Get everything right and save time
Contact us with your Connect ID:

8101754721

Our Advisors use Connect ID numbers to direct customers to specific pages on our site. When your Advisor asks you to refresh your browser, you can simply click this link.

1.888.955.6000

Share this product:

Overview
Details
Staff Reviews
Customer Reviews
Category Info
Accessories

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

Our take on the Alpine MRP-M1000

by Buck Pomerantz

V-Power amplifiers deliver the sound quality that made Alpine famous. Highly efficient power supplies housed in sleek black casings guarantee that these amps stand out in performance and appearance. The thermal management system dissipates heat and saves power, so your V-Power amp will run reliably for years to come.

The Alpine MRP-M1000 mono amplifier drives your subwoofer system with up to 1,000 watts RMS — enough to satisfy the hungriest bass setup. The low-pass filter puts you in command of the frequencies that reach your subs, while the variable bass boost is armed with plenty of low-end punch. A subsonic filter prevents wasted energy by eliminating ultra-low bass, putting all the power where you need it.

Preamp- and speaker-level inputs allow you to connect this amp in almost any vehicle. Let a V-Power amplifier transform the sound of your car's audio system.

See more info on this item

Highlights:

mono subwoofer car amplifier
600 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms)
variable low-pass filter (50-200 Hz, 24 dB/octave)
variable bass boost (0-12 dB at 50 Hz)
subsonic filter (15 Hz, 24 dB/octave)
Class D amp with MOSFET power supply
CEA-2006 compliant
STAR Topology (minimizes internal noise and prevents ground interference)
speaker- and preamp-level inputs
gold-plated screw terminals
fuse rating: 25A x 4
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
15"W x 2-7/16"H x 9-9/16"D
warranty: 1 year
Our 60-day money-back guarantee

Shop all Alpine Car Amplifiers

Note: Sorry, Crutchfield cannot ship Alpine products to Guam or Puerto Rico.

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and specs chart | What’s in the box? | In-depth notes

Features and Specs

Performance
RMS Power Output (Watts x Channels) Loading...	600 x 1
Peak Power Output (Watts x Channels) Loading...	N/A
Power at 2 Ohms (Watts x Channels) Loading...	1000 x 1
Bridged Power (Watts x Channels) Loading...	N/A
Minimum Impedance Bridged Loading...	N/A
Minimum Impedance Unbridged Loading...	2
Best Frequency Response Loading...	20-200 Hz
THD at Rated RMS Power Loading...	1%
Signal to Noise Ratio Loading...	75 dB
Input Voltage Loading...	14.4v
Features
Amplifier Class Loading...	D
Low-Pass Crossover Frequency Loading...	50-200 Hz
Low-Pass Slope (dB/octave) Loading...	24 dB/oct
High-Pass Crossover Frequency Loading...	N/A
High-Pass Slope (dB/octave) Loading...	N/A
Bass Boost Loading...	0-12 dB
Bass Boost Frequency Loading...	50 Hz
Fan Cooled Loading...	No
Fuse Rating Loading...	25 x 4
Speaker Level Inputs Loading...	Harness
Preamp Outputs Loading...	No
Width (inches) Loading...	15-1/16
Height (inches) Loading...	2-7/16
Depth (inches) Loading...	9-9/16
Parts Warranty Loading...	1 Year
Labor Warranty Loading...	1 Year

Product Research

What's in the box?

Download owner's manual

Mono amplifier
Four 25 amp fuses (installed)
7" Speaker-level input harness (4-pin Molex plug on one end and bare wires on the other)
2 Terminal covers
4 Self-tapping hex-head screws (M4 x 20mm)
4 Machine screws for securing terminal covers (M3 x 12mm)
Owner's Manual (English/French/Spanish)
Customer Care Registration card

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Controls
Connections

Features

Power Supply: The MRP-M1000 amplifier's power supply uses MOSFETs to convert DC battery voltage to the higher DC voltages needed for high power. It supplies positive and negative voltages around 0V, rather than around 6V as with conventional single-polarity power supplies. The result is higher power levels and a dynamic range wider by as much as 10dB.

Inputs: The amplifier offers both line-level and speaker-level inputs for 2 channels. The supplied speaker-level input harness allows you to connect this amplifier to a receiver without preamp outputs; aftermarket or factory. The speaker level inputs will accept the output from a high powered radio.

Terminal Covers: The amp comes with two plastic covers that protect and insulate the RCA, power, and speaker connections. Four supplied machine screws attach the covers to the amplifier.

Controls

Low Pass Filter: The amp is equipped with a 50-200Hz variable low-pass filter with a slope of 24dB/octave. This being a mono subwoofer amp, the crossover is always engaged.

Subsonic Filter: This amp utilizes a subsonic filter at 15Hz to eliminate super low frequencies that can rob power and damage speakers. The subsonic filter operates at all times, and cannot be turned off.

Bass EQ: The Bass EQ circuit provides a variable boost (0-12dB) at 50 Hz.

Connections

Left Side Of Amplifier:

GND (ground): gold-plated set screw terminal, accommodates bare wire up to 4 gauge
Battery: gold-plated set screw terminal, accommodates bare wire up to 4 gauge
Remote: gold-plated set screw terminal, accommodates bare wire up to 8 gauge
Speaker Output: gold-plated set screw terminal, accommodates bare wire up to 8 gauge

Note: Alpine recommends 4 gauge power and ground wire (minimum).

Right Side Of Amplifier:

Line Inputs: 1 pair of gold-plated stereo RCA jacks
Speaker Level Input: Molex plug input for supplied 4-pin harness

Review this product

Submit a review and you will be entered to win a $150 gift card

Crutchfield Great Gear Giveaway Official Sweepstakes Rules

Reviews for the Alpine MRP-M1000

Average Customer Review:

18 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Review title

* Email

Your email won't be visible. Please use the email address that is associated with your order.

Display name

(e.g., JohnD) Your review will be signed using the display name and location

* Your location

(e.g., Charlottesville, VA)

* Your rating

Click on a star to rate the overall product on a scale of 1-5

1500 characters left * Your review

Attach a YouTube Review

Crutchfield Video Review Guidelines

Only submit videos that you made or are authorized to use.
Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
Please see our Review Guidelines for more information.

Submit the URL of your YouTube™ video review or product demonstration. e.g., "http://www.youtube.com/v/o79TWHh598U"

500 characters left Pros

500 characters left Cons

* Agree to Terms By checking this box you agree your review becomes the property of Crutchfield, that you are over 18 years of age, that you own or have owned this product, and that you are located within the United States or its territories. Please see our Review Guidelines for more information. We reserve the right (but are not obligated to) review all submissions and edit or remove any review in any manner which we deem necessary. Your review should be posted within seven days.

Filter by rating:

5 Star: (10)

4 Star: (5)

3 Star: (1)

2 Star: (1)

1 Star: (1)

Sort by:

Showing: 1-18 of 18

View page: 1

4 out of 5

Good Amp

Written By 07avy, Atlanta. GA on Sunday, December 02, 2012

This amp is a beast. I have 2 Kicker Solo Classics (600 rms each) and they match up nicely. She does run pretty hot which can't be good so I took off one star. Lets see how it holds up. A true 1000 rms watts at 2 ohms is hard to beat at the price. I recommend this baby.

Pros:

not too big, powerful, easy connections and tuning & great price

Cons:

no rca outs, no bass knob (can buy a universal) & does run hot but has yet to shut down

Was this review helpful? Yes | No

1 out of 5

Can't take the heat

Written By Gary J, Tulsa, OK on Tuesday, March 27, 2012

Crutchfield Customer Review (What's this?)

First off, this amp was installed correctly with plenty of airspace and wired correctly. Like others have stated, it sounds great! That only lasts for maybe 30 minutes if you are really pushing your subs and it then goes into protect mode. I had it connected to two Polk MM 12" DVC speakers in a sealed box. It got about as loud as I expected it too but it could not handle much volume for long. After a couple months it gave up the ghost. Not impressed. ' '

Pros:

Sounds great.

Cons:

Overheats

Was this review helpful? Yes | No

5 out of 5

Alpine MRD-1000D

Written By foursixty, Senatobia MS on Saturday, February 05, 2011

I've had it nearly three years and it was at least a couple of years old when I bought it. I used it on 2 12" Audiobahn 550RMS subs. It absolutely pounded. Keep in mind they are in a custom sealed box behind the seat of a single cab S-10, Unreal how loud it was in that tiny box. Not only loud, but the Alpine amp has a musicality about it that most other sub amps just don't have. Just take a look at the S/N ratio. The ratio is better than 100. Less noise equals cleaner power. I finally got the best of one of my subs after 2yrs. I replaced the subs with 2 Kicker Solo Classic 12's. Now it's just as loud and hits deeper and sounds even better. I have never had this amp cut out or do anything other than what it was designed to. If you take the time to hook this amp as it was meant, it is absolutely bullet-proof. I love it.

2 out of 3 people found this helpful

Was this review helpful? Yes | No

5 out of 5

One bad amp!

Written By chris, Lindenhurst, IL on Saturday, June 26, 2010

Crutchfield Customer Review (What's this?)

This amp is super bad. I'm pushing 2 Alpine 1242D type R's in a sealed box. After i hooked up the amp and subs and turned it on, I could not believe how hard the subs where pounding. I would recommend this amp if you want some serious hard hitting sounds. It's worth the money. Thanks Troy !

3 out of 3 people found this helpful

Was this review helpful? Yes | No

5 out of 5

You need this AMP!

Written By Jeremy, Houston, TX on Monday, July 06, 2009

Crutchfield Customer Review (What's this?)

I am using this AMP to power two Kenwood W3012 subwoofers with signal from a Kenwood DNX-7140. The AMP is clear, powerful and very clean. This setup sounds great and has enough power to practically shake the ground.

4 out of 5 people found this helpful

Was this review helpful? Yes | No

3 out of 5

Ok amp for the buck

Written By Joseph, Roanoke, VA on Wednesday, June 17, 2009

I had one of these amp briefly to replace an older Alpine M300 amp that I had. It put out a lot of power, but did get hot on me quite a bit, powering 2 infinity perfect 10 subs. I decided to replace this amp with another Alpine PDX 1.600 amp and although the PDX was only 600 watts compared to this 1000 watt amp, in my opinion the PDX digital amps by Alpine sounds worlds better. The bass hit loud and sounded quite a bit cleaner with the PDX amp. Because the PDX amp is a digital amp it didn't get hot like the vpower amp I had. The pdx amp just got a little warm and didn't seem to draw as much power as noticable with my lights not dimming as much with each bass note. It is a good amp for the price, but from my experience, I'd spend the extra $$$ for the Alpine PDX amp. U wont regret it...

8 out of 12 people found this helpful

Was this review helpful? Yes | No

2 out of 5

alpine m-1000

Written By 3895, lancaster, ma on Wednesday, April 29, 2009

I bought this amp to replace my old rockford amp ive had for almost 10yrs and not too happy with the alpine m-1000. I'm using it to power my JL 12w7 the quality of sound that comes out is better but my old rockford is so much louder.

2 out of 12 people found this helpful

Was this review helpful? Yes | No

5 out of 5

Dan

Written By Dani, New Jersey on Monday, April 13, 2009

Crutchfield Customer Review (What's this?)

This is a great amp. I had jl and kenwood amps and they dont compare to this. I got this hooked up to two alpine 12" type r and it bumps hard. u can hear me comin from at least one city block away and i shake any car around me no joke. when people r standin around my car they can feel the ground vibratin which is kinda funny cuz the cops to like it too much when they pull up next to me at a stop lite and their car is shakin. Luckily i got nice cops who havent given me any tickets and actually complimented me on how loud it is and i also set off car alarms which gets sum people mad. gonna b gettin a 12" type x in the next month but still decidin if i should get 2 type x and another one of these amps. mite b too much base tho kinda scared that i mite break a window lol

8 out of 20 people found this helpful

Was this review helpful? Yes | No

4 out of 5

would have given it a 5 but

Written By rip21, mo county,md on Wednesday, March 04, 2009

tryed to hook this amp to 2 type r's that was dumb because u cant do it,
because it is made to power only 1 sub. thank god crutchfield was able to
exchange my type r's and upgraded to get a 12"type x(should have done
that in the first place.) as far as powering the type x i couldnt ask for
anything better.

5 out of 97 people found this helpful

Was this review helpful? Yes | No

5 out of 5

Alpine is best

Written By mark, Champaign, IL on Monday, February 23, 2009

Crutchfield Customer Review (What's this?)

Alright, so here it is. I bought an entire system off of crutchfield.. I went with 4 12'' JL audio subs and 2 alpine 1000watt amps. Alpine reciever, rockford fostgate wiring and CAP. It is LOUD. Havent had a problem with the amps.. They are nice looking and work excellent. 5 STARS.

1 out of 1 people found this helpful

Was this review helpful? Yes | No

5 out of 5

Powers 2 Type R 12's PERFECT!!!!

Written By Keith, Shoreview, MN on Monday, February 23, 2009

Crutchfield Customer Review (What's this?)

I recently just got 2 Type R 12 inch 2 ohm subs and put then in a custom sealed box at the recommended .85 cu. ft. paired up with the V power 1000 watt RMS @ 2 ohm and my Pioneer HU is at -11 and these things still shake my rear view!!! Once they get broken in I'll really crank them up and see what they can do.

Great Subs for their SQ and SPL!!!!

7 out of 8 people found this helpful

Was this review helpful? Yes | No

5 out of 5

WOOOOOOW

Written By mary, Green Ohio on Monday, February 16, 2009

This is powerfull!!! It pushes a 15'' RF P2 DVC wired to 2 ohms. and it
ratals!!=)

3 out of 4 people found this helpful

Was this review helpful? Yes | No

5 out of 5

Alpine MRP-M1000

Written By lilbrom, hobbs,nm on Friday, January 23, 2009

this is by far the best amp ive ever had it puts out enough power for two 12w6's.

2 out of 4 people found this helpful

Was this review helpful? Yes | No

4 out of 5

Big Power

Written By tower, Houston, TX on Friday, November 21, 2008

Bigger brother of the MRP-M500 -- identical for the most part, just 50% longer and putting out 2x the power for 2x the price. 1000W RMS @ 2ohms is a significant amount of power and is more than enough to push even the beefier, more expensive subs. I've used this amp on a single Alpine Type-R 15" (4+4ohm obviously, as this amp is not 1ohm capable and therefore not ideal for a single 2+2ohm sub) or on two JL 12W3's with pleasing results, though neither setup could handle all of the amp's power. As long as your subs are wired correctly and tuned properly, it will never shut off on you. It looks nice too, with end caps to cover up the connections and settings. I highly suggest a charging system upgrade with it though (capacitor or secondary battery), as it draws quite a bit of current.

9 out of 11 people found this helpful

Was this review helpful? Yes | No

5 out of 5

Best Amp

Written By Frank, Ct on Friday, November 21, 2008

Crutchfield Customer Review (What's this?)

If you want power you found it. I just bout this amp and two alpine subs and boy is it amazing. This amp is by far the best I ever use. The sound quality and bass are outstanding. I recommend this to anyone looking for a high quality system.

Was this review helpful? Yes | No

5 out of 5

Alpine MRP-M1000

Written By gold232, Klawock AK on Thursday, November 13, 2008

Crutchfield Customer Review (What's this?)

this amp can really push some subs i like it havent had it shut down on me
yet and i like cranking it. if i do find its a problem ill put a fan on it.

Was this review helpful? Yes | No

4 out of 5

Pretty decent for the price!

Written By T-RAY, Foley, AL on Friday, June 06, 2008

Crutchfield Customer Review (What's this?)

I am curently using this amp as a replacement for my PDX-1.1000. It performs nicely, doesn't get too hot, and has a nice appearance. My PDX is curently under repair at Crutch so I needed a replacement so I bought this one cause I absolutely love Alpine products!

The only reason I didn't give this one a perfect score is because I dont believe it pushes my type X as hard as my PDX did! It has cut out on me twice but man was I jammin! I turned my HU off then back on and it came right back, small annoyance, but this amp is still a great buy!

10 out of 13 people found this helpful

Was this review helpful? Yes | No

4 out of 5

Clean, Solid Bass!!!

Written By Ronald, Indianapolis, Indiana on Tuesday, April 01, 2008

This amp will
definetly push your
subs! I have this
amp hooked up to 2
12" Alpine Type R @
a 2ohm load and they
sound excellent! The
bass is clean and
solid with no
distortion. The only
problem I have with
this amp is if you
play your music
really loud like I
do the amp will get
hot and shut off in
about 20 to 30 min,
but keep in mind
thats with the
volume really
cranked up. But
overall you will be
very happy with the
sound quality.

112 out of 124 people found this helpful

Was this review helpful? Yes | No

1-18 of 18

Add accessories for the Alpine MRP-M1000

Add Accessories
Add a Warranty

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

Single-amp Wiring Kits

Speaker Wire

RCA Patch Cables

Firewall Bushings

Fuse Holders

Capacitors

Installation Tools and Shop Supplies

Test Discs & Lens Cleaners

Professional Installation

StreetWires ZeroNoise 3 ZN3Ki-04 4-gauge amplifier wiring kit with patch cable — red power/brown ground

6 people say

Your Price: $79.99

Add to Cart

EFX 4-gauge Amplifier Wiring Kit Power and signal connections for your new amp

60 people say

Your Price: $79.99

Add to Cart

Rockford Fosgate RFK4 4-gauge amplifier power wiring kit

4 people say

Your Price: $114.99

Add to Cart

Rockford Fosgate RFK4X Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire

7 people say

Your Price: $159.99

Add to Cart

Kicker 09PK4 4-gauge amplifier power wiring kit

4 people say

Your Price: $129.99

Add to Cart

StreetWires 12-gauge Ultra Cable™ Speaker Wire Blue/copper jacket — priced per foot

56 people say

Your Price: $1.99

Add to Cart

StreetWires 14-gauge Ultra Cable™ Speaker Wire Blue/copper jacket — priced per foot

30 people say

Your Price: $1.49

Add to Cart

StreetWires 14-gauge Super Cable™ Speaker Wire Translucent blue jacket — priced per foot (Clear)

3 people say

Your Price: $1.49

Add to Cart

StreetWires 16-gauge Super Cable™ Speaker Wire Blue jacket — priced per foot

17 people say

Your Price: $0.49

Add to Cart

Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot

7 people say

Your Price: $0.39

Add to Cart

StreetWires Zero Noise 5 Stereo Patch Cables High-performance cables with superior noise rejection (16.4-foot)

29 people say

Your Price: $29.99

Add to Cart

EFX 17-foot RCA Patch Cable

25 people say

Your Price: $9.99

Add to Cart

StreetWires FB4 4-gauge firewall bushing

12 people say

Your Price: $9.99

Add to Cart

Rockford Fosgate RFFAGU Fuse Holder Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable

10 people say

Your Price: $10.99

Add to Cart

EFX CAFH Fuse Holder In-line AGU fuse holder accepts 4/8-gauge wire

Your Price: $12.99

Add to Cart

Tsunami LITEWAVE Series PP912UM-CAP 1.2-farad canister-style capacitor with blue LCD meter

33 people say

Your Price: $99.99

Add to Cart

Tsunami Litewave Series PP92UM-CAP 2-farad canister-style capacitor

7 people say

Your Price: $149.99

Add to Cart

Tsunami HCAP-10 10-farad amp-style hybrid capacitor

2 people say

Your Price: $249.99

Add to Cart

Tsunami HCAP-5 5-farad amp-style hybrid capacitor

2 people say

Your Price: $199.99

Add to Cart

Tsunami HCAP-40 40-farad amp-style hybrid capacitor

1 person says

Your Price: $499.99

Add to Cart

S&G Tool Aid 87650 Door Trim and Panel Removal Tool

53 people say

Your Price: $9.99

Add to Cart

S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire

5 people say

Your Price: $19.99

Add to Cart

Pro.Fit Trim Panel Tool Remove your vehicle's trim panels without damage

37 people say

Your Price: $5.99

Add to Cart

Pro.Fit Hook Tool Set Installation tools — pair

5 people say

Your Price: $6.49

Add to Cart

Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces

19 people say

Your Price: $12.99

Add to Cart

Bojo Trim Panel Tools Set of 6 plastic tools — helps remove interior and exterior trim and door panels

20 people say

Your Price: $24.99

Add to Cart

DEI Heat Shrink Tubing Black 4-foot length (Assortment)

Your Price: $24.99

Add to Cart

Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

6 people say

Your Price: $49.99

Add to Cart

Autosound 2000 CD Set 5 Test CDs

Your Price: $69.95

After $10.00 Price Break

Add to Cart

InstallCard: Amp or Equalizer Prepaid professional amplifier or EQ installation

13 people say

Your Price: $79.99

Add to Cart

Smart people protect with SquareTrade- The best warranty at the best price

SquareTrade Warranty 3 Year Warranty

Your Price: $47.99

Add to Cart

In business since 1999, SquareTrade is the largest independent warranty provider in the U.S.

100% parts and labor - no deductibles

All mechanical and electrical failures covered, includes normal wear and tear.

Your item's repaired or the full item price returned withing 5 days

Runs concurrent with manufacturer's warranty

Rated 5-stars by consumers

For a more in-depth review and enhanced detailed information on the Alpine MRP-M1000, please visit the Crutchfield website product page (/S-rRnPpcm7Bpn/p_500MRP1000/Alpine-MRP-M1000.html ).

Sorry, the Alpine MRP-M1000 is no longer available for purchase.

Shop all All Car Amplifiers

Looking for a similar item?

Alpine MRP-M500

$149.99

97 people say

Or, you can still...
Go

Front
Other

Free Shipping on Everything

Alpine MRP-M1000

Mono subwoofer amplifier 1,000 watts RMS x 1 at 2 ohms

Item# 500MRP1000 offer details

Review Summary

By buying this product you'll earn up to 330 Rewards points.

My system has plenty of power. Who needs an amp?

Our take on the Alpine MRP-M1000

by Buck Pomerantz

Highlights:

Shop all Alpine Car Amplifiers

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs

Product Research

Our Product Research Team

Features

Controls

Connections

Product Reviews

Reviews for the Alpine MRP-M1000

Average Customer Review:

Review this product:

Crutchfield Video Review Guidelines

Filter by rating:

Good Amp

Can't take the heat

Alpine MRD-1000D

One bad amp!

You need this AMP!

Ok amp for the buck

alpine m-1000

Dan

would have given it a 5 but

Alpine is best

Powers 2 Type R 12's PERFECT!!!!

WOOOOOOW

Alpine MRP-M1000

Big Power

Best Amp

Alpine MRP-M1000

Pretty decent for the price!

Clean, Solid Bass!!!

Accessories

Add accessories for the Alpine MRP-M1000

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

Smart people protect with SquareTrade- The best warranty at the best price

Sorry, the Alpine MRP-M1000 is no longer available for purchase.

Looking for a similar item?

Alpine MRP-M500

$149.99

Or, you can still...

Mono subwoofer amplifier
1,000 watts RMS x 1 at 2 ohms