Features
Mounting Options
Inputs and Outputs Notes
Features
LCD Panel: The Westinghouse LTV32w6 features a 32" TFT (Thin Film
Transistor) Active Matrix LCD panel with a display resolution of 1366 x 768 and
16.7 million colors.
Tuners: The TV has built-in ATSC/NTSC/ClearQAM tuners for standard and
high-definition channels from over-the-air and cable.
AutoSource: This TV features AutoSource--automatic source detection
and switching. When you power on the source you want to use, the TV will sense a
signal and automatically switch to that input. AutoSource switching can be
turned on or off in the menu.
Contrast Ratio: This TV has a 1000:1 contrast ratio giving you
excellent brightness and contrast for superior picture and detail from
both PC and TV images.
Picture Settings: You
can select and adjust the settings for Brightness,
Contrast, Saturation, Hue, Sharpness, and Backlight. You can reset picture
setting to factory defaults at any time.
Aspect Ratio: The TV will
display 16:9 images in their original format. You can choose
one of the following screen sizes for 4:3 programs:
Input Labels: You can add a
customized label associated for each input. Available labels include: TV, Cable,
DTV, DVD, Game, HiDef, PC, Sat, STB, or VCR. You can also program the TV to skip
a particular input if no component is connected to it.
Favorite Channels: You can
store your three favorite channels on the "A", "B", and "C"
buttons on the remote for instant access.
PC-Capable: This unit has a
15-pin D-Sub (RGB) input that allows you to use it as a high-resolution computer
monitor. An output setting of 1360 x 768 @60Hz is recommended. Also supported
outputs include: 1280 x 720 (60Hz), 1024 x 768 (60Hz), 720 x 400, and 640 x 480.
A 3.5mm minijack is supplied for the audio connection.
Speakers: The TV features two
speakers along the bottom front panel, powered by a 9 watt x 2 channel
amplifier.
Parental Control: The
Parental Controls
automatically lock out programs that are deemed inappropriate for children. You
can set up the Parental Control parameters using the TV Parental Guidelines, MPAA
(movie) ratings, Canadian French, or Canadian English ratings systems. You can
set the TV to block unrated shows if desired. The
Parental Control function is protected by a 4-digit PIN.
Sleep Timer: The
sleep timer switches the television off after a specified amount of time. The
sleep timer can be set to 15, 30, 45, or 60 minutes.
Power Mode: There
are two Power Modes for Standby Power: Normal, which requires more power (up to
17W, typical), but
gives you a picture quicker when you turn on the TV; or E.Saver (Energy Saver),
which requires less power (less than 1 watt, typical), but takes longer to come
on.
Remote Control:
The supplied remote is pre-programmed to operate this unit only.
Mounting Options
VESA Mounting Bracket
Standard: The TV has two sets of 4 mounting holes on the back for an aftermarket
wall-mount bracket. The outer spacing of the mounting holes is VESA 100 (100mm x
100mm), while the inner spacing is VESA 75 (75mm x 75mm),
in accordance with the industry standards set by the Video Electronics Standards
Association. Both sets of mounting holes accommodate 4mm screws. Without the stand, the TV weighs 37.4 pounds.
Inputs and Outputs Notes
SpineDesign and Waterfall Design:
The TVs inputs and outputs are mounted on the side of a "spine" that runs
vertically along the back of the TV. The side-facing connectors allow for easy
access. The connecting cables cascade like a "waterfall", making it easy to keep
your cables organized.
Inputs: This TV has a total of
four A/V
inputs:
- HDMI: The HDMI input can
be used to connect a DVD player, Game console, HDTV or Satellite Set-top box
with an HDMI output. The HDMI input can also be used to connect a device with a DVI
output (a DVI-to-HDMI adapter cable is necessary). If a DVI-equipped device
is used, separate audio cables will also be needed from the device to the
provided RCA stereo audio jacks. No audio cables are needed for an HDMI-equipped
device. The HDMI jacks
will accept 1080i, 720p, 480p, and 480i signals.
- Component Video: The two
component video inputs can be used to connect a DVD
player, Game Console, HDTV or Satellite Set-top box with a component video
output. Separate RCA stereo audio inputs are provided. The
Component Video jacks
will accept 1080i, 720p, 480p, and 480i signals.
- Video/S-Video: One A/V
device can be connected to the TV using either a composite or S-Video cable.
You cannot use both composite and S-Video at the same time. Separate RCA
stereo audio inputs are provided.
PC: This input
consists of a stereo mini-jack and an analog RGB (D-Sub 15-pin) jack. This jack
allows you to connect a personal computer with a D-Sub 15-pin output. When using
the RGB (D-Sub 15-pin) jack, you must use the 3.5mm minijack input for your audio
connection.
Antenna Inputs:
The TV has one RF input (threaded "F" connector) for an over-the-air
antenna or a cable TV connection.
Audio Outputs: Two
audio outputs are provided for connecting the TV to a receiver or amplifier: one
pair of analog RCA jacks, and one
optical digital output.
