Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Alpine HCE-C107D rear view camera directly
connects to your Alpine Mobile Multimedia head unit to give you a view of the area directly behind your vehicle. This small camera should be installed on the rear bumper by the license plate of your SUV, truck,
or car. It is compatible only with those Alpine head units with a dedicated
Alpine camera input. It does not include a hideaway box, as some rear view
cameras require. The package consists of the rear view camera in a waterproof
housing, adjustable mounting bracket, and necessary cable and hardware for installation.
Head Unit Compatibility: The HCE-C107D is compatible only
with the following Alpine Mobile Multimedia head units: iXAW-404 and iXAW-407.
Rear View Camera: The rear view camera gives you a wide 138°
horizontal angle view of the area immediately behind your vehicle. It is
designed to give you high visibility in daylight or at night. The clear, color
images appear on the LCD screen of your compatible Alpine Mobile Multimedia head
unit to help you see obstructions behind the vehicle as you back into a parking
spot, or to keep an eye on cargo you may be towing. The image provided by the
camera is a mirror image, so they appear the same in the monitor as what is seen
in your rear-view mirror. Other features of the camera include:
- 1/4" color CCD image sensor with a 4:3 aspect ratio
- 510 x 492 (250,000) effective pixels
- Focal Length: f/1.28mm
- Brightness: f=2.8
- Illumination Range: 1.5 to 100,000 lx
- Viewing angle: 138° horizontal, 105° vertical
- 300 horizontal lines of resolution
Mounting: The Rear View Camera comes supplied with a bracket designed to mount to the rear of your vehicle. The mounting
bracket comes supplied with a self-adhesive pad and 4 mounting
screws. The bracket allows you to adjust the camera angle up or down. The camera
comes with a long cable to run the power and signal from the head unit to the
camera. The HCE-C107D also comes supplied with 5 self-adhesive cable clips for wire
Optional License Plate Mount: You can mount the HCE-C107D to
your vehicle's rear license plate with the optional KTX-C10LP license plate
mounting kit (item # 500KTXC10L).
- Camera: Width = 0.925", Height = 0.925", Depth = 1.18"
- Mounting Bracket: Width = 1.578", Height = 1.184", Depth = 0.754"