External Device Controls
Overview: The Kenwood eXcelon KDC-X692 AM/FM CD receiver features a
fold-down detachable face, rear auxiliary and USB input, three pairs of 4-volt preamp outputs, CD
changer and Satellite radio controls and built-in iPod operation, as well as
MP3/WMA/ACC playback. The unit also supports Bluetooth via an optional adapter
sold separately. In addition, the CD player comes with an IR wireless remote
control. The unit's amplifier is rated at 22 watts x 4 channel RMS and 50 watts
x 4 channel peak.
Fold-down Detachable Face: The unit features a fold-down
face that detaches from the chassis to deter theft. The CD player comes supplied
with a soft black fabric, draw string face case to protect the detachable face
when you have it off the chassis. You must fold the face down before inserting
or eject a disc.
AAC/MP3/WMA Playback: The KDC-X692 can play MP3, WMA, and
AAC files with ID3 tag information recorded on CD-R and CD-RW discs in ISO9660
Level 1/Level 2, Joliet, Romeo and Long file name formats. Each disc should have
a maximum of 8 directory levels, 50 folders 255 files per folder and 512 files/folder combination. During MP3/WMA/AAC playback, the unit displays any recorded ID3 Tag (Ver.1 or 2)
information. The headunit will display up to 30 characters.
24 Bit D/A Converter: The
Kenwood KDC-X692 utilizes a 24-bit digital to analog converter for superior CD
Supreme Setting: When MP3, WMA or AAC files encoded at a low bit rate (less than 96 kbps, 44.1k, 48kHz) are
played, the Supreme Setting function restores their high frequencies so the
sound quality is closer to files encoded at a high bit rate. The processing is
optimized for the compression format and the bit rate used. When the Supreme
Setting is Off, the unit plays the original sound stored in the audio file.
AUX Input: The KDC-X692 is equipped with a rear panel 3.5mm
minijack auxiliary input for connecting external portable audio devices such as
an MP3 player or Tape walkman.
Auxiliary Display: The
KDC-X692 allows you to select the source type displayed when using the
auxiliary input. You can choose from AUX, DVD, Portable, Game, Video or TV.
Dual Zone: The Dual Zone mode
allows you to output the Main source and the Auxiliary input separately for the
front and rear channels. You can select whether the auxiliary input will play in
the front or the rear.
3-Sets of 4V Preamp Outputs: The KDC-X692 features front, rear and
subwoofer 4V preamp outputs. The Subwoofer preamp output can be turned On or Off
and adjusted independently. The front and rear speaker preamp outputs are
balance and fade adjustable. The subwoofer preamp output is non-fading. The
front, rear and subwoofer preamp outputs are fixed to the rear chassis of the
Built-In Amp Setting: If you are using external amplifiers
to power all of your vehicle's speakers you can turn the unit's built-in
amplifier off to enhance the player's preamp output quality.
Front and Rear High-Pass Filter:
The KDC-X692 features an independent High-Pass Crossover for the front and rear
channels when your front and rear speakers are connected to the unit's
speaker-outputs or preamp-outputs. You can adjust the high-pass crossover from through, 40, 60, 80, 100, 120,
150, or 180, 220Hz. The "Through" selection is a full-range setting. This feature is
very helpful when you have smaller-type speakers in the front and larger-type
speakers installed in the rear of the vehicle.
Low-Pass Filter: The receiver
features a built-in Low Pass Filter control for the preamp-output when the
Subwoofer Output is "on". You can select from 50, 60, 80, 100,120Hz or Through.
The "Through" setting allows your external amplifier's crossover network to do
all the filtering for your subwoofer.
Subwoofer Level: Once you have
switched the Subwoofer Output to "on" you can independently control the
subwoofer preamp output level from the CD receiver. You select levels between
-15 to +15.
Subwoofer Phase: You can adjust
the phase of the subwoofer output between 180-degrees (Reverse) or 0-degrees
Rotary Volume Control: The CD
receiver uses a 3-way rotary volume control that increases and decreases the volume of
the stereo from 0 to 35. The rotary knob also controls other audio settings such
as Bass, Treble and preset EQ settings.
Speaker Settings: The Speaker
Setting function tailors the System Q Sound Control settings according to the
type of speakers in your vehicle. You may select a Speaker Setting of "SP Off"
(flat), "SP OEM" (for OEM factory speaker systems), "SP 6x9/6" (for systems with
6" and 6"x9" speakers), or "SP 5/4" (for systems with 4" and 5" speakers).
Note: The Speaker
Setting affects the bass, midrange, and treble values of the System Q
presets. The speaker setting should be selected first.
System Q Sound Control: Six
curves are preset into memory, allowing you to recall the best preset EQ curve
for different types of music. Each
preset has its own level settings for bass (100Hz), midrange (1kHz), and treble
(10kHz). The 6 preset curves with their respective bass, mid, and treble levels
are as follows:
- Rock: Bass +6, Mid +1,
- Pops: Bass +3, Mid +2, Treble +6
- Easy: Bass +6, Mid 0, Treble -2
- Top 40: Bass +3, Mid +1, Treble +8
- Jazz: Bass +5, Mid +2, Treble +2
- Natural (Flat): Bass 0, Mid 0, Treble 0
Note: The above values
reflect the System Q settings when the Speaker Setting function is
turned off. When the Speaker Settings are selected, the System Q level
settings are different.
Detail Audio Control: The
KDC-X692 features independent Bass, Treble and Midrange control. The Detail
Audio Control allows you to adjust the following settings for the Bass, Treble
and Mid frequency levels.
- Frequency: 40/50/60/70/80/100/120/150 Hz
- Q-Factor: 1.00/1.25/1.50/2.00
- Bass Extend: On/Off
(when this feature is set to "On", the low frequency response is
extended by 20%)
- Level: -8 to +8
- Frequency: 0.5/1.0/1.5/2.0 kHz
- Q-Factor: 1.0/2.0
- Level: - 8 to +8
- Frequency: 10/12.5/15.0/17.5 kHz
- Level: -8 to +8
Loudness: The Loudness feature
compensates for low and high tones during low volume. You can turn this feature
either on or off. Only the low tone is compensated for when the tuner is
selected as a source.
Volume Offset: The level of
each source may be independently adjusted to prevent radical leaps in output
volume when switching from one source to another. The available settings range
from -8 to 0.
Source Tone Memory: This feature allows you to store System Q bass, middle and treble tone settings
for each source (CD, FM, AM and Aux).
Text/Title Scroll: The KDC-X692 will display CD text, Audio file text and Satellite and HD radio
text. You can turn the
scrolling feature "on" to scroll longer titles across the screen.
Last Position Memory: If the unit is shut off or switched to the tuner mode while a CD is playing, the
next time CD is selected as the source, playback will resume from the point
where it left off.
CD Force: When there is a
problem with playing a CD with a special format, this setting plays the CD by
force. Some CDs still may not play in the CD Force mode.
CR-2 Advanced Tuner: This unit
uses Kenwood's CR-2 Advanced tuner for clear radio reception. You can choose one
of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes
the selected band's preset stations only with each button press), or Manual.
Auto Memory Tuning: Not only
does the CD receiver's tuner allow you manually enter your desired presets you
can choose to have the unit automatically put stations with good reception in
the memory banks automatically; this is a handy feature when traveling. The
tuner features 3 FM banks (1, 2, 3) and 1 AM bank. You can store 6 presets for
each AM/FM bank giving you a total of 18 FM presets and 6 AM presets.
Clean Reception System Circuit
(CRSC): This circuit controls multi-path distortion by reducing stereo
separation. As stereo separation is reduced, multi-path has less effect on the
radio signal, improving reception in areas with tall buildings and mountains.
The CRSC circuit can be turned on or off.
Tel Mute:The KDC-X692
features a cell-phone mute wire (brown) in its harness that when hooked up to
your car's phone system mute wire will automatically mute the receiver's audio
signal when a call comes in.
Security Code: You can enter a
4-digit security code which must be used when the unit is removed from the
vehicle, or the constant power source is disconnected from the unit. When
constant power is restored to the unit, the security code must be entered before
the unit becomes operational.
FL Motion Display: The unit features a large 4-tone
Fluorescent full-dot motion display.
Display: When the unit is in Standby mode, the face/button illumination
is "keyed." In addition, while the unit is in Standby mode, you can turn the
clock display on or off. When the Clock Display is turned on and the unit is in
Standby mode, the Clock Display is also "keyed." Pressing and holding the source
button turns the unit off completely.
Display Illumination Control: This function turns off the display when have not performed an operation for 5
seconds. This is effective for when you are driving at night.
Dimmer: The dimmer function
will dim this unit's display automatically when the vehicle light switch is
turned On when you connect orange/white Illumination wire of this player.
Remote Control: The KDC-X692
comes with the RC-547 IR wireless remote control with a full numeric keypad. The
remote will control Audio, CD, Tuner, Satellite Radio, and Dual Zone functions. It is
powered by 2 "AA" batteries (supplied). The dimensions of the remote are: L =
5.362", W = 1.962", D = 1.115".
Attenuator: The CD receiver features an Attenuator button on
the headunit as well as the supplied remote control that turns the volume down very quickly with one
touch of the button.
Steering Wheel Remote Compatibility: The KDC-X692 has a
"steering remote control" lead on the back panel. When used with the optional
SWI-JACK interface (item number 127SWIJACK), you can retain the use of your
steering wheel and/or rear seat radio controls when replacing the factory head
unit in select vehicles. The SWI-JACK is compatible with over 95% of the
vehicles made from 1986 to the present. Compatible vehicles include many Acura,
Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Honda,
Hummer, Infiniti, Isuzu, Jaguar, Jeep, Kia, Land Rover, Lexus, Lincoln, Mazda,
Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Plymouth, Pontiac, Saab, Saturn,
Suzuki, Toyota, and Volkswagen vehicles and Harley Davidson motorcycles. Please
consult "What Fits My Car" to see if your vehicle is compatible.
External Device Controls
USB Port: The Kenwood KDC-X692 features a rear panel 2.0
USB type-A port that is attached to the headunit's chassis by a 39" pigtail. The USB port enables
connection and control of a portable USB mass-storage class device. The USB port
is compatible with all USB mass storage class devices that support the FAT16 or
FAT32 file system. Your USB device should only have a maximum of 8 directory
levels, 255 folders, and 255 files per folder with a maximum of 65,025 files and
folders. When your USB device is connected to this unit, it can be
charged up provided that the KDC-X692 is powered on. The KDC-X692 comes supplied
with a mounting bracket for the unit's USB port so you permanently mount it in
your vehicle. The unit also comes supplied with a USB cap to place over the USB
when not in use.
Note: You cannot connect a USB device via a USB hub or
Multi-Card Reader to this unit.
iPod High-Speed Connection:
The KDC-X692's rear-panel USB port also
acts as an iPod high-speed direct connection when used with the optional Kenwood
USB Direct Connection Cable (113iP101, sold separately) or the USB/iPod cable
that came with your iPod. Using either cable allows you to connect, control, and
charge the following iPod models with the KDC-X692: iPod nano (1st/2nd/3rd/4th
generation), iPod video (5th generation), iPod classic (80/120/160GB), iPod touch
(1st/2nd generation), and iPhone/iPhone3G. You should update your iPod with the latest software version from Apple's website before connecting it to the KDC-X692. When your iPod is connected to the
KDC-X692, the iPod's controls will be disabled and you will need to operate your
iPod through the KDC-X692's controls.
Note: All other iPod models not mentioned above are not
compatible with this unit.
Satellite Radio Ready: There are several options for
connecting an optional XM or SIRIUS Satellite Radio receiver to this receiver:
HD Radio Ready: With an optional Kenwood HD Radio tuner (item #
113KTCHR20), you will be able to receive digital AM/FM broadcasts from local
stations where available. This new technology will significantly improve audio
quality and reception, as well as include information such as artist name and
song titles or traffic news, viewable on the receiver's display.
Bluetooth Ready: The unit is
also Bluetooth compatible using the optional Kenwood KCA-BT200 Bluetooth
adapter. Using this adapter you can make and answer phone calls from the Kenwood
headunit. You can even download your Phonebook information from your compatible
mobile phone into the headunit. You are able to register up to five compatible
Bluetooth cell phones when using the KCA-BT200 adapter. Visit
http://www.kenwood.com/bt/information/ for a complete list of compatible
Bluetooth enabled phones.
Changer Controls: This unit is directly compatible with Kenwood changers
manufactured in 1998 or later. If the changer has an O-N switch, the switch will
need to be set to the "N" position. In addition to basic disc navigation features, this
unit has the following changer controls: direct disc access (using the remote),
direct track access (using the remote), track intro scan, track repeat, disc
repeat, disc random, and magazine disc random. When connected to a CD Text capable CD changer or
an MD changer, this unit can display disc and track titles for discs encoded
with disc and track title information. The text information can be scrolled
manually or automatically.
Additional/Optional Rear Auxiliary Input: The unit already features a rear panel auxiliary
input, but if you need a second auxiliary input, another one can be added to the rear of
the unit. When used with an optional adapter, this unit can accept a rear input
from an auxiliary source. When the CA-C1AUX adapter (item 113CAC1AX) is used,
you cannot connect a CD changer to the head unit because the adapter plugs into
the DIN changer control connection on the head unit. When the KCA-S220A
2-changer switch (item
113KCAS220) is used, you can connect a CD changer and an auxiliary audio source
at the same time. When an auxiliary audio source is connected, you can choose
from one of six names for the source: Aux Ext, TV, DVD, Video, Game, or
Supplied Software: The KDC-X692 comes supplied with the
Kenwood Music Editor Version 2.0.0 CD-ROM. Kenwood Music Editor is a desktop
software that helps organize, manage and transfer music files to your USB
devices from your PC.
- Operating System:
- Microsoft Windows XP Professional/Home Edition SP2 or later (32-bit
- Microsoft Windows Vista (32-bit version)
- Operation on Windows XP/Vista (64-bit version) is not
- Other Programs:
- Microsoft .Net Framework 2.0
- QuickTime 7 or later (when using AAC file)
- Windows Media Player 10/11
- Hard disk with at leas 100MB free space
- CD-ROM drive (CD-R/RW drive when writing to CD-R/RW)
- USB interface (2.0/1.1)