Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Sanus VisionMount VLMF109 motorized
full-motion mount for 37" - 60" TVs up to 110 lbs lets you find the perfect
viewing angle without leaving your seat, via IR remote control. It offers
ultra-quiet, fully automated extension up to 9" from the wall and up to 60º of
swivel with the touch of a button. Its low-profile design retracts to just 2"
from the wall for a flush appearance. The easy-to-install VLMF109 can shift left
and right after mounting to ensure perfect TV placement, and its open wall plate
design allows ample room for cable management.
Capacity: The VisionMount VLMF109 is designed for 37" to 60"
flat-panel TVs. It has a maximum weight capacity of up to 110 lbs.
Bolt Pattern: The monitor bracket has multiple vertical
slots and can accommodate vertical hole spacing (on the back of the TV) from 1"
(25mm) up to 17.75" (450mm). The unit can expand horizontally for larger TVs.
The vertical brackets can slide along the horizontal bars, accommodating a
horizontal hole spacing from 5.375" (136mm) to nearly 31.6875" (805mm). The
VLF220 comes with M4, M5, M6, and M8 size bolts of differing lengths to mount
the brackets to your TV.
VESA: Given the mounting bracket's range of motion, it will
accommodate the following VESA hole patterns in accordance with industry
standards set by the Video Electronics Standards Association:
- VESA 800 x 400
- VESA 600 x 400
- VESA 400 x 400
- VESA 400 x 300
- VESA 400 x 200
- VESA 300 x 300
- VESA 300 x 200
- VESA 200 x 200
- VESA 200 x 100
Note: For TVs with 400 x 400 spacing, remove the support tubes and
release the locking carriages before attaching the bracket. After the
brackets are attached to the TV, then re-secure the locking carriages and
inert the support tubes.
Smooth Motorized Motion: The Sanus VLMF109 offers
smooth, motorized motion that quietly moves your mounted TV up to 9" from the
wall. For viewing angles anywhere in a room it also swivels 60º (left/right).
The VLMF109 retracts to just 2.0625" from wall in the home position for a clean,
Note: You will need to plug the motorized wall-mount's power
adapter into an AC plug.
Motorized with Remote Control: The Sanus VLMF109 motorized
full-motion wall-mount includes an IR wireless remote control for easy
extension, retraction, and swivel movements of the wall-mount bracket with the
push of a button. The motorized wall-mount includes an IR emitter with an
attached 58" cord, which plugs into the VLMF109's motorized arm for remote
Preset Positions: You can program the Sanus VLMF109 to revert back to
preset positions using the included remote control. The wall-mount bracket
offers two preset positions.
Post-Installation Level Adjustment: Post-installation
level adjustment allows the TV to "roll" up to 5º clockwise and counterclockwise
to ensure it is perfectly level, and lateral shift ability makes it easy to
center the TV on the wall, even with off-center studs.
Open Design: The wall-mount's open design provides generous space for
Optional Speaker Mount: The Optional Sanus VisionMount VMA202 soundbar
speaker mount (item #
051VMA202) attaches directly to this wall mount, allowing you to mount your
soundbar, digital processor speaker, or center channel with no additional
drilling under your TV. The VMA202's extruded aluminum and heavy-gauge steel
construction is strong and sturdy, and holds speakers up to 35 lbs.
Wall Mounting: The bracket should be mounted to a wood wall stud, solid concrete, or concrete block
using the supplied wall-mount lag screws. Required tools include:
- Stud finder
- Phillips-head screwdriver
- Ratchet with 1/2" sockets (or 1/2" box wrench)
- Drill with 3/16" bit for wood stud installations
- Tape measure (ruler)
- Wall Plate: 29.5" wide x 1.25" deep x 13.75" tall
- TV Bracket: 33.25" wide x 1.75" deep x 22.0" tall
- Motorized Arm (retracted): 12.25" wide x 2.0625" deep x 10.0" tall
- Remote: 1.75" wide x 4.375" deep x 0.5625" tall
- IR Emitter: 0.9375" wide x 1.375" deep x 0.6875" tall
- Power Adapter: 1.5625" wide x 1.5625" deep x 3.4375" tall