car stereos & components?
2002-05 Dodge Ram 1500 Regular Cab
2002 • 2003 • 2004 • 2005
The Dodge Ram 1500 regular cab truck with its oversized grille is one of the most distinctive vehicles on the road today, and its retro styling really says "Made in the U.S.A." The 2002-05 version is a particularly cool-looking vehicle, so it's not surprising that lots of Ram owners want to upgrade their factory audio systems — they plan on hanging on to their trucks. As with any regular cab truck, you've got some space issues when it comes to bass, but you can definitely set up this Ram with a sound system that really rocks.
Two options are available for these Dodge Ram 1500 regular cab trucks: the standard 4-speaker system, and the Infinity system with seven speakers. Either version will have the speaker grilles in the dash, so the best way to tell which system you've got is to look down through your windshield into those dash openings — if you see speakers, you have the Infinity system. It can get a little confusing at times figuring out how to upgrade the Infinity system in this truck, but we'll talk about that later. The good news is that you have lots of options for replacing your radio and speakers with either system, and you'll find some really nice subwoofer enclosures made specifically for this popular truck.
2002 Dodge Ram regular cab (Crutchfield Research Photo)
Replacing your factory radio
Standard 4-speaker system: This Dodge truck came with an AM/FM/cassette receiver in the dash, with the option of the Infinity AM/FM/cassette/CD deck. You can install a DIN radio (2" tall) in the Ram's dash. You'll need a mounting kit to trim out the new radio, a wiring harness that allows you to connect your new radio without having to cut the factory wiring, and an antenna adapter that allows you to connect the Dodge antenna plug to your new radio. (Crutchfield includes these installation parts free with most orders, along with our step-by-step instructions for your Ram.)
|Factory Infinity radio (Crutchfield Research Photo)|
The mounting kit for this truck holds any DIN (2" tall) radio in the dash opening. You have to remove the entire receiver/climate control trim panel to access the stereo, but that's not too tough. Here's what the kit looks like installed.
|Stereo mounting kit for the 2002 Ram 1500 (Crutchfield Research Photo)|
Infinity system: Starting with the 2004 Ram, you'll need a special adapter to connect a new car stereo to the Infinity amp. You'll want to buy a new radio that has two sets of preamp outputs in order to connect this special adapter, and the bad news is that you'll lose the ability to fade from your front to rear speakers. The good news is that a new stereo will bring new life to the Infinity system because the Infinity amp will see a cleaner, more powerful signal.
And here are a few things to keep in mind when you consider a new car stereo:
- If you have factory Sirius Satellite Radio, you'll lose this capability if you replace the factory radio.
- If your vehicle is equipped with a factory hands-free cell phone interface, you'll lose this capability if you replace the factory radio.
- If you have factory navigation, you'll lose it when you replace your radio.
- Video receivers with flip-out monitors aren't a good idea in this vehicle because of the way the dash is shaped.
If you like the sound of the factory system, but it's just not loud enough for you, you might consider JL Audio's Clean Sweep or some other factory sound processor. This type of processor allows you to tie an amp (and even new speakers) into your factory radio, for a big boost in performance.
Tools Needed: To install a new stereo, you'll need a Phillips screwdriver, a flat blade screwdriver, and a panel tool.
Steering Wheel Audio Controls
There are two companies (PAC and Axxess) that make adapters for connecting your steering wheel audio controls to a new car stereo. We recommend the Axxess self-programming ASWC-1 adapter for this Dodge truck. It'll tap directly into the data wire in the dash. (You'll have to access the analog control wire inside the steering column in order to install the PAC adapter.)
Replacing your factory speakers
4-speaker system: You'll find two full-range 6"x9" speakers in the doors, along with 5-1/4" in the rear side panels. You're limited by the .84" mounting height available under the factory grille, so only a few 6"x9"s will fit there without modifying the grille. You can also put 5-1/4" or 6-1/2" speakers in the front doors with the help of adapter brackets, and that really opens up your choices. You'll find wiring harnesses (and mounting brackets, if needed) for every location, and Crutchfield includes the brackets and harnesses free with every speaker order.
The rear factory speakers are similar to aftermarket 5-1/4"s, and you can install almost any 5-1/4"s back there if you are willing to drill new screw holes. You also have the option of installing 3-1/2" speakers in the dash locations, but you'll have to run speaker wire to those dash openings.
Infinity system: You'll find a complement of 7 speakers: 3-1/2" speakers in the dash (left, right), a 2-1/2" center dash speaker, two 6"x9" woofers in the front doors, and two 5-1/4" speakers in the rear side panels. You have a factory amp behind the glove box that powers the three dash speakers, the front door 6"x9" subs, and the full-range rear speakers. If you're planning on upgrading your speakers, you have some choices to make.
- If you're keeping your factory radio, you can replace all your speakers, but keep in mind that the front door speakers are just producing bass. No need for a speaker with a silk dome tweeter in that location.
- If you're replacing the factory radio, you can connect your new stereo to the factory Infinity amp — you should get a little boost in performance but the speakers will continue to work as they do now. You can replace most of your speakers, but again, the front door speakers will only produce bass.
- You'll get the best results if you bypass the Infinity amp. Just run speaker wire from the new stereo to the glove box, then tie into the speaker wires coming off the factory amp. Then you have the option of running full-range 6"x9" speakers in your front doors, hooking up outboard amps, and building a full-blown audio system.
Tools needed to replace the dash speakers: a Phillips screwdriver and a panel tool. You'll have to splice into the factory speaker wiring to connect new dash speakers, so you'll also need wire strippers, crimp connectors and a crimping tool, and electrical tape.
Tools needed to replace the front speakers: a Phillips screwdriver, a panel tool, and a T30 Torx driver.
|Infinity passenger-side dash speaker (Crutchfield Research Photo)|
You'll have to pry out the panel that runs all the way across the dash to access these speakers. You can replace the right and left dash speakers, but you'll have to splice the wires coming from your new speakers into the factory speaker wires. You'll have a hard time replacing the 2-1/2" center speaker, but you might as well leave it hooked up if you're keeping the factory amp.
|Infinity center speaker in middle of dash (Crutchfield Research Photo)|
|Front door panel (Crutchfield Research Photo)|
Front door speakers
You have to remove the entire door panel to access the front door speakers. If you're keeping the factory amp, go for the most efficient 2-way 6"x9"s you can find. If you're replacing the whole system and installing a subwoofer, then you should consider putting a round speaker (5-1/4" or 6-1/2") in the door for better accuracy. Here's a cool idea: if you're replacing the whole system but you don't want a sub, consider putting smaller subs in the doors and powering them with an amp. (Make sure you apply plenty of Dynamat or other sound deadener to the door panels and frame to eliminate rattling from the subs.)
|Rear side panel speaker (Crutchfield Research Photo)|
Rear side panel speakers
You have to remove the factory toolbox and the side panels to access the rear speakers. A 5-1/4" speaker drops in the opening but you will have to drill new screw holes, so make sure you have the tools for that! A harness is available for those back speakers so you don't have to cut off the factory speaker connector.
Tools needed to replace the rear speakers: Phillips screwdriver, Phillips right-angle screwdriver, panel tool, drill and 1/8" bit, T25 and T47 Torx drivers.
Bass in your Ram truck
|Stealthbox with 13.5" sub for the Dodge Ram regular cab (photo courtesy of JL Audio)|
JL Audio makes an excellent Stealthbox sub for this truck, which houses a single13.5" sub in a sealed enclosure. The enclosure replaces the center seat cushion, but retains the factory storage tray and armrest. The JL Audio W3v3 sub in this Stealthbox handles up to 600 watts RMS, so we're talking about some serious bass in the Ram regular cab's relatively small cabin. Best of all, this enclosure doesn't take up any space behind your seats, so you can still throw stuff back there.
Cell Phone: If you're keeping your factory radio, you'll find some handy harnesses from Parrot that, in conjunction with a Parrot Bluetooth kit, allow you to connect your cell phone to your factory radio.
iPod adapters: Again, if you've decided to keep your factory radio, you'll find adapters available that allow you to tie your iPod into your Dodge radio.
Whether you're installing a simple alarm or a remote start system, we recommend the FLCAN interface. If your truck has a gray key, this truck has a built-in transponder that has to be bypassed for remote start, and FLCAN will take care ot that. Even without the gray key, FLCAN makes it easier to install a security system.
A homepage for your vehicle
Tell us about your vehicle, and you'll be able to see:
New to Crutchfield? Here are 3 things we want you to know about us.
Custom Car Showroom