Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

10 Outlets: The Panamax M10-HT-PRO Power Conditioner features 4 digital-ultrasonic noise filtered AC outlets, 3 Linear Filtration AC outlets, and 3 Linear Filtration AC outlets with sequenced activation.

Premium Filtration: The Panamax M10-HT-PRO's Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allow your A/V equipment to perform up to its full capability.

Automatic Voltage Monitoring (AVM): The M10-HT-PRO senses sustained voltages that are high enough to cause damage to your components, and shuts the power down before damage can occur to your equipment.

Hi Definition Ready:  The Panamax M10-HT-PRO has been designed to work with your High Definition system. The M10HT-PRO employ additional ultra-sonic filtering for both digital and video components. This additional filtering assures peak system performance.

12 Volt Trigger: The M10-HT-PRO features a delayed outlets trigger input and trigger input/bypass switch witch allows source equipment to activate or deactivate the delayed outlets on the M10-HT-PRO.

Coax Protection: The M10-HT-PRO features two threaded coaxial female inputs and outputs to protect equipment from electrical surges that travel over Cable, Satellite, and Antenna lines.

Telephone Line Protection: The M10-HT-PRO is equipped with a RJ-11 telephone jack input and output which protects equipment from electrical surges that travel over Telephone lines.

Surge Protection: The M10-HT-PRO features exclusive protect and disconnect circuitry to prevent damage to your equipment in the event of a catastrophic surge such as lightning by completely disconnecting AC power to connected equipment.

Lifetime $5,000,000 Connected Equipment Warranty: Panamax will replace or repair equipment that is damaged by an AC or signal line surge while connected to a properly installed Panamax surge protector (up to $5,000,000).

Mounting: The M10-HT-PRO features four rubber feet for mounting the power conditioner on a horizontal flat surface and also features two keyhole slots to allow you to mount the M10-HT-PRO to your wall.

Connections, Controls and Indicators

AC Outlets:

• Digital Video Outlets: 2 digital video AC outlets
• Filtering Outlets: 2 filtering AC outlets
• Protected Outlets: 3 protected AC outlets
• Delayed Outlets: 3 delayed AC outlets

Input/Output:

• Satellite/Cable Inputs/Outputs: 2 Coaxial line inputs and 2 coaxial line output (gold-plated, threaded, female F-type connectors)
• Telephone: One telephone line input and one telephone line output (RJ-11 connection)
• Trigger Input: 12 Volt trigger input for delayed outlets

Controls:

• On/Off Switch: Turns all the outlets On and Off
• Trigger Bypass: Trigger bypass/input switch
• Reset Button: Resets power conditioner

Indicators:

• Protection OK: LED indicator illuminates Blue during normal operation
• Extreme Voltage: LED indicator illuminates Red during  extreme voltage

Specifications

AC Power:

• Line Voltage: 120VAC, 50/60Hz
• Initial Clamping Level: 200V Peak, 141V RMS
• UL 1449 Suppression Rating: 330V
• Protection Modes: L-N
• Maximum Current Rating: 15A
• Energy Dissipation: 575 Joules
• Peak Impulse Current: 21,000 A
• EMI/RFI Noise Filtration: 53dB (100kHz-1MHz)
• Response Time: <1n

Telco Protection:

• Clamping Level: 600V
• Capacitance: 30pF
• Suppression Modes: Metallic
• Wires Protected: 2 wire, 1 pair (3,4)
• Connectors: RJ-11

Universal Coax Protection:

• Clamping Level: 90V
• Frequency Range: 5MHz-2200MHz
• Insertion Loss: <1dB
• Connections: Female "F"-type