Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The NuForce iTX iPod transmitter for Air DAC allows
you to stream music from your Apple iPod, iPhone, or iPad to the NuForce Air DAC wireless
sold separately) and your connected home entertainment system. The combination
uses SKAA & HPX technology for a wireless audio system with Hi-Fi CD-quality
iPod/iPhone/iPad Compatibility: The NuForce iTX iPod transmitter is compatible with
iPod classic (80/120/160GB), iPod nano (1st/2nd/3rd/4th/5th/6th gen), iPod touch
(1st/2nd/3rd/4th gen), iPhone (2G/3G/3GS/4/4S), and iPad (1/2). The iTX iPod
transmitter features a 30-pin dock connector which plugs into the dock connector
of your iPod, iPhone, or iPad. The iTX transmitter also comes with a 41" USB
charging cable which allows you to charge your iPod, iPhone, or iPad while the
iTX transmitter is installed.
Point-to-Point Wireless Connection: The NuForce iTX iPod
transmitter can be combined with the NuForce Air DAC wireless DAC/receiver to
form a point-to-point wireless audio network; no WiFi "hotspot" needed for
reception. Each transmitter can send audio to up to four receivers, and each
receiver can connect to as many as four transmitters.
SKAA Wireless Technology: The NuForce iTX transmitter and Air DAC
wireless DAC/receiver (sold separately) are based on a new wireless technology
known as SKAA. SKAA technology provides seamless operation and a consistent user
interface across different SKAA devices, via 2.4GHZ wireless point-to-point
transmission. Unlike similar wireless devices, the iTX transmitter and Air DAC
(sold separately) do not experience the typical loss in sound quality or
interference capability of cell phones and other wireless devices. Rather, the
system offers CD-quality sound, virtually no latency, a 49-98' range, and a
spread-spectrum technology that detects and chooses from among available
frequency spectrums in order to avoid interference. Visit
www.skaa.com for more detailed information.
HPX Audio Codec: SKAA wireless Technology uses the HPX audio codec
from Eleven Engineering Incorporated. The HPX audio codec has several advantages
resulting in uncompressed, full-audio bandwidth (20-20k), CD-quality
(16bit/48kHz) sound. With HPX audio compression technology, you will be unable
to tell the difference between an uncompressed, wired audio source and the
NuForce iTX transmitter and Air DAC (sold separately) sending CD-quality sound
across the SKAA (2.4GHZ) wireless link.
- 16-bit/48kHz x 2 channels
- SNR > 90dB A-weighted
- Operates @ 2.4GHz
- Latency < 13.8 ms
- 49-98' wireless range