Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Controls
Mounting Options
Specifications
Features
Dynamic Balance Technology:
Dynamic Balance is a proprietary Polk Audio technology using laser imaging to
determine what combination of speaker materials create the least amount of
resonance. Eliminating resonance in speakers results in a wide, smooth response
and low distortion.
Angled Woofer: The LC65FX is
equipped with a 6-1/2" Aerated Polypropylene cone woofer. Aerating the
polypropylene cone adds damping without adding weight for great sound and high
efficiency.
Dual Tweeters: Each speaker has
dual 3/4" Ring Radiator tweeters for crisp, transparent highs. The ultra-light woven Ring
Radiator Diaphragm delivers flat response, precise detail and overall accuracy.
A High Frequency Waveguide prevents phase cancellations for smooth, uniform
frequency response and wide dispersion. A Low Frequency Waveguide promotes
laminar airflow between chambers to prevent air turbulence. This feature serves
the same function as Power Port for Polk's bass systems. The tweeters are angled
120° away from each other.
Timbre-matched: The speaker is
timbre-matched to the Polk Audio LCi Series for seamless, enveloping imaging
when used in a home theater system. You can mix and match any of the LCi-series
in-wall and in-ceiling speakers with the LCi Series high performance
floor-standing and bookshelf speakers.
Terminals: The speaker features
gold-plated spring post terminals.
Wiring Recommendations: The
gauge of the speaker wire used to connect this speaker depends upon the length
of the run:
- Lengths of up to 25': 18
or 16 gauge
- Lengths between 25' to 50':
16 or 14 gauge
- Lengths between 50' and 75':
14 or 12 gauge
- Lengths of over 75': 12
gauge
Controls
Imaging Switch: The LC65FX
offers switchable "Solid" and "Diffuse" imaging patterns to create the surround
effect you desire. A "Diffuse" image is defined as one which creates a "cloud"
of sound, as ambient sounds fill the environment around the listening area. A
"Solid" image is one which creates a more directional, localized, pin-point
sound.
Wall Distance Switch: It is
recommended that the speaker be placed more than 2' from a side wall. If
position limitations demand than they be installed less than 2' from a side
wall, the proximity of the surface can result in a response "bump" between 50Hz
and 200Hz, causing the speaker to sound "boomy." The Wall Distance switch
flattens response and tunes out the "boominess" without sacrificing deep bass
response.
Mounting Options
Installation: The speaker
requires a rectangular cutout 7-1/4" wide and 12-3/4" with a depth of 3-1/4", assuming
1/2" drywall. Once the hole is cut, the speaker can be held in place and the
Rotating Cams can be tightened, allowing you to secure the speaker to the
drywall without any extra assembly. If you will not be mounting the speaker in
drywall, make sure the wall or ceiling material can safely support the weight of
the speaker before installation; the speaker weighs approximately 4.35 pounds.
Paintable: The grille and
flange can be painted, allowing the speaker to match any décor.
A clear plastic paint mask is included to protect the "unpaintable" speaker
parts.
Optional Enclosures: The optional Polk Audio ENCL LC65i custom built Performance Enclosure (item # 107ENLC65i, sold individually) gives the LCi in-wall
speakers the performance edge by hiding a complete, perfect-volume speaker
cabinet within the wall before the wall is even completed. The LCi Performance
Enclosure is specially constructed of high density MDF and fill material in a
size that fits securely between wall studs in pre-drywall
construction. Adjustable brackets make pre-construction installation simple.
Vibration-damping foam pads ensure rattle-free performance.
Specifications
Frequency Response:
- Overall: 30 Hz-27 kHz
- +/-3 dB Limit: 45 Hz-26 kHz
