System Features
Controls
Connections
Mounting Options
Power Requirements
System Features
Instant Home Theater (IHT): The Polk Audio SurroundBar 6000 Instant Home Theater (IHT)
is a complete 2.1-channel home theater system comprised of a single self-powered
speaker, a wireless powered subwoofer, and an IR remote control. The SurroundBar
6000 IHT utilizes two Polk 3D Audio technologies (Polk Digital Logic and SDA
Surround) to deliver richer, fuller sound (with no rear speakers) to your
flat-panel TV from a compact system with no complex hook-up or set-up.
3D Audio: Polk Audio's 3D Audio combines two groundbreaking, patented
technologies to produce an audio environment that can only be described as
3-dimensional. Combining Polk Audio's proprietary SDA Surround technology and
Polk Digital Logic processing technology produces a rich, enveloping listening
experience. It reaches out beyond your TV screen to put you in the center of the
action.
- Polk Digital Logic: The SurroundBar 6000 Instant Home Theater
utilizes Polk Digital Logic (Polk's proprietary DSP programming) to deliver big,
crisp sonic performance with no complicated setup or calibration. Through Polk
Digital Logic, the SurroundBar 6000 IHT's sound is created independent of any
room boundaries. Polk Digital Logic helps to maintain a solid center channel for
clear, intelligible dialogue and Polk's signature warm & full sound.
- SDA (Stereo Dimensional Array) Surround: Polk's patented SDA
(Stereo Dimensional Array) Surround technology is based on fundamental
research into the way our ears process sound and perceive the direction of
sounds. It uses a patented combination of signal processing and acoustical
geometry that complements the spacing between your ears to produce a wide
sound stage without the need for rear mounted speakers. Since the
SurroundBar works directly with the hearing mechanism and requires no
special room characteristics, it can deliver a room-filling surround
experience in nearly any location in almost any type of room
Dynamic Balance Driver Technology: Polk Audio's patented
Dynamic Balance process allows Polk to design their drivers specifically for
flatter frequency response, revealing the sharpest details and a more lifelike
transparency, with absolutely no strain even at high volume. It's a bold, rich,
warm, and lifelike sound.
Self-Powered SurroundBar: The self-powered surroundbar features
four 2-3/4"" full-range dynamic balance polypropylene composite cone
drivers powered by a built-in 160 watt amplifier. The
speaker itself is lightweight in part because of the neodymium
magnet structures in the drivers. The surroundbar features a black plastic
bass-reflex enclosure with two rear-firing ports and a non-removable metal grille. The surroundbar can be placed on a
tabletop or wall-mounted. It provides analog and digital audio connections to
your television. The surroundbar requires AC power.
Wireless Powered Subwoofer: The wireless powered subwoofer features a
down-firing 7" woofer and down-firing port in a bass-reflex (ported) cabinet.
The 7" woofer is powered by a built-in 120 watt amplifier. The wireless powered
subwoofer receives it audio signal wirelessly from the system's surroundbar, so
there is no subwoofer cable to connect. The wireless powered subwoofer requires
AC power.
System Frequency Response: The overall system frequency response is
40Hz-20kHz. The -3dB system frequency response is 50-16kHz.
Controls
System Controls: The SurroundBar 6000 IHT offers the following system functions - Power, SurroundBar
Volume,
Subwoofer Volume, Source Selection, and Mute. You can control these functions
from the SurroundBar's touch-sensitive controls, included remote control, or
your TV's remote control.
Touch-Sensitive Controls: The touch-sensitive buttons on the
front of the surroundbar offers easy operation of the system.
Remote Control: The included IR wireless remote control
provides wireless operation of the system.
Program Remote: You can program the SurroundBar 6000 IHT to respond to your TV's remote.
Sync: The Sync button is located on the back-panel of the SurroundBar.
If the wireless subwoofer stops receiving an audio signal from the SurroundBar,
press the Sync button to regain system connection.
Connections
Wireless Connection: The
SurroundBar and powered subwoofer communicate with one another wirelessly. The
SurroundBar sends the low-pass audio signal from your TV or connected source to
the powered subwoofer wirelessly over an RF frequency.
Note: The SurroundBar
and powered subwoofer come from the factory preset to work together. If the
wireless subwoofer stops receiving an audio signal from the SurroundBar,
there is a sync button on back of the SurroundBar to press to regain system
connection.
Analog & Digital Connections: The surroundbar features one optical
digital input and two stereo 3.5mm inputs to connect the system to your
flat-panel TV.
Analog Connections: The surroundbar is equipped with two analog
3.5mm stereo inputs to connect your television (which may lack an optical
digital output). If your TV is equipped with stereo RCA outputs, a
minijack-to-RCA adapter is provided. The additional 3.5mm stereo input can be
used to connect another audio device, such as your MP3 player.
Digital Connection: The surroundbar also features an optical
digital input to connect your flat-panel TV with an optical digital output
(optical digital cable included). The surroundbar supports 2-channel PCM &
Dolby Digital through its optical digital input.
Mounting Options
Placement: The SurroundBar 6000 Instant Home Theater offers various
placement & mounting options for the surroundbar & wireless powered subwoofer.
Surroundbar Placement: The surroundbar should be centered under or above your
flat-panel TV screen. The lightweight easy-to-mount single speaker can be placed
on a tabletop or wall-mounted. It can sit on a flat surface because of its
integrated rubber feet that enable it to rest
securely. If your TV is wall-mounted, the surroundbar can be mounted right
beneath it using the speaker's integrated keyhole slots (x2) on the
rear-panel.
Note: The keyhole slots are spaced 25" apart.
Wireless Subwoofer Placement: The powered subwoofer receives its
signal from the surroundbar wirelessly, so it can be placed virtually
anywhere in the room (up to 50' from surroundbar). It only requires plugging
into an AC outlet.
Power Requirements
Power Supply: Both the surroundbar and wireless powered subwoofer
require an AC outlet connection using the supplied AC power supply and AC power
cords.
Auto Power: When their master power switches are left on,
the amplifiers in both the surroundbar and subwoofer turn on automatically when
the surroundbar receives an audio signal. Both amplifiers turn off after
approximately 15 minutes without an audio signal.
