Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
The BassLink T consists of a 10" subwoofer, two 10" passive radiators, and a
250-watt Class D amplifier housed in a rigid polymer enclosure, all carefully
engineered to work together as a unique, integrated system.
Enclosure Type and Materials: The enclosure is made of an
acoustically inert polymer, which is rigid enough to resist flexing and dampens
unit has a built-in 250-watt Class D amplifier, which is highly efficient and
designed specifically for use with the subwoofer and passive radiator
When the speaker-level inputs are used, the system will automatically turn on
and off with the radio.
The auto turn-on feature does not operate when the preamp level inputs are used,
unless the remote turn-on lead is connected.
Filter: The low-pass filter frequency can be adjusted from
50 to 120 Hz for a seamless transition between the output of this unit and that
of the other speakers in the vehicle. The filter has a slope of 12 dB per
The amplifier includes a continuously adjustable bass
boost from -6 to +3 dB, centered at 40 Hz.
This switch allows you to select normal or reverse for best bass
Remote Level Control: The
supplied remote level control allows you to adjust the bass level from anywhere
in the vehicle. The remote level control can be mounted under the dash, in the
dash, or on any flat surface that allow for safe operation while driving.
Mounting: Infinity's BassLink T has been
developed to deliver great bass in pickup trucks, SUVs and hatchbacks. Its low
profile design allows it to be positioned in the confined space of a pickup
truck, or behind the rear seats of a hatchback or SUV. The BassLink T should be
secured to a solid mounting surface using the supplied mounting hardware. There
are multiple indentations along the mounting flange. These allow for different
screw locations, depending on your vehicle. If your particular application does
not allow you to secure the lower portion of the BassLink T, please use the
supplied mounting feet, which give you the ability to secure the enclosure to
the floor of your vehicle.
Note: The indentations
along the mounting flange do not have pre-drilled screw holes. So, you
will have to drill holes into the appropriate indentations when mounting
- +Batt (power): 0.377"
- Remote: 0.377" screw
- GND (ground): 0.377" screw
- Remote Level Control: RJ11
jack for use with supplied remote level control
- Line Level Input: left and
right RCA audio jacks
- High Level Input: 4-pin
jack for use with supplied speaker-level input harness