Processors and Other Upgrades

What do you get at each step of building a car audio system?

Jeff, Crutchfield's Senior Car Merch­andiser, devised a plan: to test the sound of an after­market system one component at a time in order to prove how much better it sounds than factory. He wanted to test each configuration for sound quality and loudness, then evaluate the soundstage. We started with the factory system of Jeff’s ’04 Ford F-150, then upgraded to an Alpine receiver and a set of Polk speakers. We ran tests after installing each component to note improvements in the sound. Now it's time to upgrade the speakers, run 12-gauge wire, and install a processor to act as the brains of the system.

Catch up with part 1 of our test series and read more about our testing methodology.

Part 2 gives you an in-depth look at adding amps, subs, and upgrading the speakers.

Watch our Part 3 video to see Jeff in action.

Part 3: Making it sound perfect

So now Jeff's got a nice head unit, amps, subs, and a new set of speakers in place. Time to do some serious fine-tuning, as well as upgrade as much as possible in order to achieve the ultimate goal: a perfect soundstage. Here's what's on tap for this round:

• upgrading the speakers to high-end components
• upgrading from 16-gauge wire to 12-gauge
• bi-amping the component speakers
• adding a processor to run the show and fine-tune

Jeff cut a custom-sized piece of plastic to fill the oval factory speaker opening. You can download his template if you'd like to add a 6-3/4" round speaker to your F-150.

Time to separate the woofer and tweeter with components

It’s time to make the leap from a coaxial design, with the woofer and tweeter together, to a component system. The soundstage will benefit from raising the tweeter closer to ear level, and to say that Jeff loves the way the Focal speakers sound is the ultimate understatement.

In fact, he calls the Focal Utopia Be 165W-RC component speakers “the best-sounding pair of speakers I’ve heard for the dollar.” He’s heard a few in his day, so that’s high praise. Only trouble is, they feature 6¾" round woofers, which had to fit in the F-150’s 5"x7" opening. So Jeff made a template and cut a piece of ABS plastic to fit, then screwed the round speakers to it. He cut little notches on the top and bottom of the opening to accommodate the round speaker, and Jeff had the speakers he wanted.
 

Focal Utopia Be® 165W-RC component speakers Jeff knew he needed speakers capable of reproducing the subtle details he wanted his finely tuned audio system to play, so he went straight to the Focal Utopia line and its legendary beryllium tweeter. This tweeter plays so naturally, it’s as if the vocalist is right there in the car with you.

Higher-quality speaker wire: maximizing signal flow from the amplifiers

Up to this point, Jeff had been using the 16-gauge, factory-installed speaker wire. He upgraded to larger 12-gauge wire in order to send more signal to his speakers. He also wanted the better aftermarket wire in there — to a car manufacturer, speaker wire is one of thousands of decisions made to hold costs down, whereas aftermarket companies make the best wire they can. With larger, better-designed, better-insulated wire going from his amps to his subs, Jeff expected a stronger, cleaner signal to eventually reach his ears.

Bi-amping lets Jeff effectively double the power he sends to the front speakers by sending two channels of power to the woofers and the other two to the tweeters.

Bi-amping the front speakers

Jeff bypassed the component speakers’ crossover system and bi-amped them — sending two channels of power to the tweeters, and two to the midrange drivers. This effectively doubled the power sent to the speakers, and increased the headroom in Jeff’s system.

A component system’s crossovers contain protection circuitry for the mids and tweeters, which makes bi-amping tricky business if they’re not specifically designed with the extra inputs to accommodate it. Here, Jeff’s taken the crossovers out, but he has a processor strictly controlling the range and intensity of frequencies that are being sent to the tweeters (as shown in the diagram). While some crossovers allow for bi-amping, Jeff cautions that if you bi-amp without a processor, you run a greater risk of damaging your tweeters.

The processor: fine-tuning to perfection

Alpine’s PXA-H800 gave Jeff the complete tuning tool he wanted to really home in on the great sound he’s after. He tuned his system by adjusting the processor’s 31-band EQ for each individual channel, and by applying time correction. He used the remote to address each frequency and meticulously dialed in the levels until the sound curve smoothed out. But it’s not just about achieving a perfect curve — it’s also about how the system sounds and makes him feel. Jeff can set up his system in different ways, store the settings as presets, and recall them instantly to hear which one suits him best.

The Alpine PXA-H800 processor and RUX-C800 controller

Alpine digital processor and controller The PXA-H800 processor takes the output from Jeff’s receiver, cleans it up, and sends it to his amplifiers. It also gives him a full suite of digital features to fine-tune his system. Putting all the processing power within reach is the RUX-C800 controller, which Jeff mounted in his dash. He left enough cable so he can pull it out of its installed location and access settings easily.

Checking the sound curve: without the processor

Below, we’re using the 7-band parametric EQ in the Alpine receiver, plus the Focal crossover network, to tweak the sound. Remember, the RTA is merely a snapshot of what’s going on, so you shouldn’t read too deeply into the individual peaks and valleys here. The overall curve is tracking pretty closely with Jeff’s ideal.

With the processor

A picture’s worth a thousand words. As you can see below, the RTA snapshot looks a lot like Jeff’s ideal now. He’s leaving a tiny bit of bass on the table, a compromise because he didn’t want to give up any seating to add extra subs. After all, he wants to save room for passengers so they can hear how great his truck sounds.

The Soundstage

Jeff’s choice of bi-amping the component speakers, combined with the tweaking power and time correction of the PXA-H800 processor, has the soundstage just where he wants it. Now Jeff can picture the band playing out on the hood, right at ear level. The time correction makes sure the image shifts enough to put him front and center.

The soundstage is the most important thing in the whole system buildup — it’s what Jeff actually hears, how he experiences what he’s worked so hard on. He says it best: “I feel like I’m really listening to music. All the instruments have their own space.”

What did we learn during this round of testing?

First of all, the Focal Utopia speakers totally rock. They sound incredible, especially the amazing beryllium tweeter. Every snare hit, tambourine, and other high detail comes in crystal-clear.

Bi-amping, while probably overkill for most of us, was a key to Jeff’s plan. It gave him a ton more headroom to work with. Alpine’s PXA-H800 processor did the rest, letting Jeff “EQ the heck out of it” and giving him pinpoint control over every channel. Bottom line: his system sounds crazy good. Jeff’s fond of saying that he likes to remove the electronics from the equation — meaning all that’s left is music, as pristine as it was recorded. And he’s definitely accomplished that in his truck.

What’s up next?

We’ll address the various vibrations and rattles in Jeff’s truck with Dynamat sound damping material. We’ll test incrementally to note any changes in SPL and the sound curve, including while driving at different speeds over different surfaces. Normally you'd do this while you're doing everything else, but we want to quantify the gains Dynamat gives you.