About the Polk Audio db5250
Dreaming about better sound in your car audio system? Do you want lows that are full and definitive? Highs that resonate with clarity? Stop dreaming! Polk's db Series db5250 component system uses 5-1/4" Dynamic Balance polymer/mica woofers to produce full, rich lows that are free of detail-robbing distortion. Rubber surrounds, Kapton voice coil formers, and pole plate heat sinks protect the woofers against the stresses of heat and time.
The liquid-cooled silk/polymer composite tweeters can be mounted in either flush- or surface-mount cups to project detailed highs where you want to hear them. The 2-way crossover networks (4,000 Hz, 12 dB/octave) ensure smooth, well-balanced output, with built-in protection circuitry to guard your tweeters against accidental damage from high power.
Don't limit yourself to only using these speakers in your car they've passed tough environmental testing that certifies them for marine use as well.
Product highlights:
- Dynamic Balance polymer/mica woofer with butyl rubber surround
- certified for marine use
- 1" liquid-cooled silk/polymer tweeter
- 2-way crossover network (4,000 Hz, 12 dB/octave)
- tweeter protection circuitry
- frequency response: 53-25,000 Hz
- recommended power range: 10-100 watts RMS
- peak power handling: 200 watts
- sensitivity: 89 dB
- top-mount depth: 2-3/16"
- warranty: 1 year
- MFR # AA5255-A
What's in the box:
Polk Audio db5250 owner's manual
- 2 Woofers
- 2 Grilles
- 2 Tweeters (each tweeter has attached 38" speaker leads)
- 2 Crossovers
- 2 Flush-mount cups
- 2 Metal flush-mount clamps
- 2 Surface-mount cups
- Four 38" lengths of speaker wire (each length of wire has female quick-slides on one end and tinned wire on the other end)
- 14 Self-tapping screws
- 8 Speed clips
- Owner's Manual
- Online registration sheet
Customer reviews for Polk Audio db5250
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Polk Audio db5250
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk/Polymer composite | |
Woofer Composition | Polymer/Mica composite | |
Woofer Surround | Butyl rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 89 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 53 - 25k Hz | |
Minimum RMS Wattage | 10 | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 2 3/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 4 3/4 | |
Mounting Height (Inches) | 0.216 | |
Frame Width | 5.166 | |
Frame Length | 5.166 |
Product Research
Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.
Marine Certified Woofer: Polk db Series speakers are built to withstand exposure to moisture and UV rays, so they work well in boats and cars.
Woofer Cones: Each speaker features a Dynamic Balance polymer/mica composite mineral-filled cone. The cones are stiff and lightweight for big sound and low distortion.
Butyl Rubber Surrounds: For a smoother response and improved durability, the woofers use butyl rubber surrounds.
Kapton Voice Coil Formers: The low-mass 2-Layer 1" Kapton Voice Coil formers are lightweight for high sound output. Kapton's high melting temperature ensures high power handling and excellent reliability.
Pole Plate Heat Sinks: The pole plate heat sinks promote better heat dissipation for superior power handling and reliability.Silk/Polymer Composite Tweeters: The 1" liquid-cooled, silk/polymer composite tweeters provide clear, detailed highs.
Marine Certified Tweeters: Polk db Series speakers are built to withstand exposure to moisture and UV rays, so they work well in boats and cars.
Mounting: The supplied mounting cups allow you to surface- or flush-mount the tweeters. The tweeters swivel in the flush-mount housings, allowing you to adjust them for optimum imaging.
Tweeter Mounting Dimensions:
Surface Mount | Flush Mount | |
---|---|---|
Mounting Height | 1.006" | 0.188" |
Depth | 0.919" (screw depth) | 1.045" |
Frame Diameter | 1.988" | 2.289" |
Cutout Diameter | N/A | 2.041" |
2-Way Crossovers: Each crossover features a 12dB/octave, 4kHz high-pass network for the tweeter and a 12dB/octave, 4kHz low-pass network for the woofer.
Electronic Tweeter Protection Circuits: Each crossover has a built-in protection circuit that guards the tweeter against accidental damage from high power.
Crossover Connections: The crossover inputs and outputs are screw terminals.
Mounting: There are two mounting holes in the base of each crossover.
Crossover Dimensions: L=4.985", W=3.095", H=1.205"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
These are great speakers, put them in the front and the back doors of my 02 F-150 Supercrew.Running on radio power right now but will hook them up to my amp later. Can't beat the price.
hester127 from Dallas, TX