About the Alpine SWE-1041
A little bit of money and a whole lot of bass that's the story with the Type E subwoofer! Alpine's most affordable line of subs uses a responsive pulp cone reinforced with Kevlar® for strength and durability. The heavy-gauge, custom-stamped steel frame is thick to withstand the demands of hard playing. A bumped back plate keeps the sub from bottoming out, so you'll hear only "bump" from the bass! A high-excursion Santoprene rubber surround allows the most travel for powerful low-frequency response.
The Type E SWE-1041 10" subwoofer works great in sealed enclosures. Vented boxes can also be used for a bigger, boomier sound.
Details:- Kevlar®-treated pulp cone
- 3/4" Santoprene rubber surround
- dual oversized Nomex® spiders
- frequency response 30-1,000 Hz
- power range 50-200 watts RMS
- peak power handling 600 watts
- sensitivity 87 dB
- top-mount depth 5-13/16"
- sealed box volume: 0.6-1.25 cubic feet
- ported box volume: 1.0-1.75
- Recommended Q-Logic Box Type: 1, 2, 3
- 1-year warranty
Priced per speaker
What's in the box:
Alpine SWE-1041 owner's manual
- One 10" subwoofer
- Type-E Subwoofer Application Guide (English/French)
- Warranty card
- Customer Care Registration card
Customer reviews for Alpine SWE-1041
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Alpine SWE-1041
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Kevlar reinforced pulp | |
Surround Material | 3/4" Santoprene rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
87 dB at 1 watt | |
Frequency Response | 30 - 1000 Hz | |
Max RMS Power Handling | 200 | |
Peak Power Handling (Watts) | 600 | |
Top Mount Depth (inches) | 5 13/16 | |
Bottom Mount Depth (inches) | 6 5/16 | |
Cutout Diameter or Length (inches) | 9 1/8 | |
Frame Width | 10.478 | |
Frame Length | 10.478 | |
Vas (liters) | 33 | |
Fs (Hz) | 33 | |
Qts | 0.66 | |
Xmax (millimeters) | 11.7 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | N/A | |
Minimum Sealed Box Volume (cubic feet) | 0.6 | |
Maximum Sealed Box Volume (cubic feet) | 1.25 | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | 1 | |
Maximum Ported Box Volume (cubic feet) | 1.75 |
Product Research
Features
Enclosure Compatibility
Manual Corrections
Kevlar Reinforced Pulp Cone: This Alpine Type-E subwoofer has a Kevlar reinforced pulp cone. Kevlar adds strength and tear resistance to the woofer cone while maintaining the benefits of a pulp cone design. There is also an oversized inverted dust cap of the same material, which increases rigidity and virtually eliminates distortion at extreme volume levels.
Santoprene Rubber Surround: The high-excursion 3/4" Santoprene rubber surround is durable and resistant to the elements, resulting in a very reliable performance. The surround is specially designed to resist deformation that is common in most woofers with wide surrounds. This design gives the surround more control over the woofer cone to reduce distortion and possible driver failure.
Dual Progressive Nomex Spiders: This subwoofer has dual progressive Nomex spiders for added stability and mechanical durability. The custom progressive rolls gives the woofer a longer, more linear stroke with maximum centering and restoring force. Special edge control design and Nomex construction provide excellent tear resistance, strength and long-term reliability. The tinsel speaker leads are integrated into the top spider.
Custom High Strength Steel Basket: The frame is custom stamped from high strength steel.
Bumped Back Plate and Extended Vented Pole Piece: This woofer combines a bumped back plate and an extended pole piece, giving it a nearly 1.5" peak-to-peak cone excursion. This extra long cone movement provides a higher bass output.
Enclosure Compatibility: This woofer can provide extended bass in sealed and ported enclosures (please see the "Enclosure Compatibility" section for more information on the recommended enclosures).
Recommended Sealed Box Volume: The sealed box sizes recommended by Alpine range from 0.6 cu/ft to 1.25 cu/ft.
Recommended Ported Box Volume: The ported box sizes recommended by Alpine range from 1.0 cu/ft to 1.75 cu/ft. No port sizes are listed by the manufacturer.
Frequency Response: The manual lists the frequency response as "Fs-1kHz" (Fs=Free Air Resonance frequency). According to Alpine, the actual frequency response is 30Hz-1kHz.
Recommended Enclosures: The manual only lists the recommended sealed box volume range. The ported box volume recommendations were obtained directly from Alpine.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Cheap price good subs. Got two, put them in my truck and let the bang start. Put a JL mono amp on them and there holding up.
Israel Martinez from Odessa Tx